OPTIMAL ELECTRODE POSITION FOR DELAMINATION DETECTION IN CARBON FIBRE REINFORCED POLYMER COMPOSITES USING ELECTRIC RESISTANCE CHANGE METHOD

被引：0

作者：

Kovalovs, Andrejs ^{[1
]}

Chate, Andris ^{[1
]}

机构：

[1] Riga Tech Univ, Riga, Latvia

来源：

18TH INTERNATIONAL SCIENTIFIC CONFERENCE ENGINEERING FOR RURAL DEVELOPMENT | 2019年

关键词：

CFRP; delamination; electrical resistance; non-destructive; ANSYS; LAMINATE;

D O I：

10.22616/ERDev2019.18.N234

中图分类号：

S2 [农业工程];

学科分类号：

0828 ;

摘要：

The electric resistance measure by the four probe method is used by various researchers for detection of the internal delamination in laminated carbon-fiber-reinforced polymers composite material. In the present study, the effect of spacing between probes on the crack detection efficiency has been investigated. The problem has been solved by the method of planning of the experiment and the response surface method by using the 2-D finite element model. The distance between the probes and the crack length has been selected as the parameter of the study. As a result, it was revealed, that in case of the crack growth, a decrease in the distance between the current and voltage probes has a greater effect on the detection of the crack than the change in the distance between only the current probes.

引用

页码：1180 / 1185

页数：6

共 50 条

[41] Damage monitoring of carbon fibre reinforced polymer composites using acoustic emission technique and deep learning
Barile, Claudia
Casavola, Caterina
Pappalettera, Giovanni
Kannan, Vimalathithan Paramsamy
COMPOSITE STRUCTURES, 2022, 292
[42] Testing of delamination in multidirectional carbon fiber reinforced polymer laminates using the vertical eddy current method
Zeng, Zhiwei
Tian, Qingze
Wang, Handong
Jiao, Shaoni
Li, Jian
COMPOSITE STRUCTURES, 2019, 208 : 314 - 321
[43] Characterization of thermal expansion in additively manufactured continuous carbon fibre reinforced polymer composites using fibre Bragg grating sensors
Orlowska-Galezia, Anita
Graczykowski, Cezary
Pawlowski, Piotr
Rimasauskiene, Ruta
Rimas, Marius
Kuncius, Tomas
Majewska, Katarzyna
Mieloszyk, Magdalena
MEASUREMENT, 2024, 227
[44] Moisture detection in carbon fiber reinforced polymer composites using electromechanical impedance technique
Wandowski, T.
Malinowski, P.
Skarbek, L.
Ostachowicz, W.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2016, 230 (02) : 331 - 336
[45] Crack Detection of Carbon Fiber Reinforced Composites by Electric Potential Method with Bridge Circuit Concept
Hwang, Hui-Yun
COMPOSITES RESEARCH, 2009, 22 (01): : 9 - 14
[46] Investigation of delamination and surface roughness in end milling of glass fibre reinforced polymer composites using Fuzzy Model and Grey wolf Optimizer
Priya, I. Infanta Mary
Palanikumar, K.
Senthilkumar, N.
Prabha, P. Siva
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (02): : 749 - 769
[47] Experimental analysis of Delamination, Thrust Force and Surface roughness on Drilling of Glass Fibre Reinforced Polymer Composites Material Using Different Drills
Kumar, Dhiraj
Singh, K. K.
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) : 7618 - 7627
[48] Investigation of delamination and surface roughness in end milling of glass fibre reinforced polymer composites using Fuzzy Model and Grey wolf Optimizer
I. Infanta Mary Priya
K. Palanikumar
N. Senthilkumar
P. Siva Prabha
International Journal on Interactive Design and Manufacturing (IJIDeM), 2024, 18 : 749 - 769
[49] A novel damage detection method for carbon fibre reinforced polymer structures based on distributed strain measurements with fibre optical sensor
Li, Yingwu
Sharif-Khodaei, Zahra
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2024, 208
[50] Detection of impact damage in glass fibre-reinforced polymer composites using a microwave planar resonator sensor
Jin, Qi
Yu, Haoyan
Meng, Zhaozong
Fei, Fei
Li, Zhen
NONDESTRUCTIVE TESTING AND EVALUATION, 2024, 39 (06) : 1541 - 1560

← 1 2 3 4 5 →