OPTIMAL ELECTRODE POSITION FOR DELAMINATION DETECTION IN CARBON FIBRE REINFORCED POLYMER COMPOSITES USING ELECTRIC RESISTANCE CHANGE METHOD

被引：0

作者：

Kovalovs, Andrejs ^{[1
]}

Chate, Andris ^{[1
]}

机构：

[1] Riga Tech Univ, Riga, Latvia

来源：

18TH INTERNATIONAL SCIENTIFIC CONFERENCE ENGINEERING FOR RURAL DEVELOPMENT | 2019年

关键词：

CFRP; delamination; electrical resistance; non-destructive; ANSYS; LAMINATE;

D O I：

10.22616/ERDev2019.18.N234

中图分类号：

S2 [农业工程];

学科分类号：

0828 ;

摘要：

The electric resistance measure by the four probe method is used by various researchers for detection of the internal delamination in laminated carbon-fiber-reinforced polymers composite material. In the present study, the effect of spacing between probes on the crack detection efficiency has been investigated. The problem has been solved by the method of planning of the experiment and the response surface method by using the 2-D finite element model. The distance between the probes and the crack length has been selected as the parameter of the study. As a result, it was revealed, that in case of the crack growth, a decrease in the distance between the current and voltage probes has a greater effect on the detection of the crack than the change in the distance between only the current probes.

引用

页码：1180 / 1185

页数：6

共 50 条

[11] Enhancement of delamination fatigue resistance in carbon nanotube reinforced glass fiber/polymer composites
Grimmer, Christopher S.
Dharan, C. K. H.
COMPOSITES SCIENCE AND TECHNOLOGY, 2010, 70 (06) : 901 - 908
[12] Small delamination detection in carbon fibre reinforced polymer composite beam by NDT and vibration analysis
Nayak, Smaranika
Pattnaik, Swetansu
Panigrahi, Isham
Nayak, Rameshkumar
Panda, Sambitkumar
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020, 27 (03) : 789 - 794
[13] Improving the delamination resistance of fibre reinforced polymer composites using 3D woven metal Z-Filaments
Abbasi, S.
Ladani, R. B.
Wang, C. H.
Mouritz, A. P.
COMPOSITES SCIENCE AND TECHNOLOGY, 2020, 198
[14] Optimal design for the flexural behaviour of glass and carbon fibre reinforced polymer hybrid composites
Dong, Chensong
Davies, Ian J.
MATERIALS & DESIGN, 2012, 37 : 450 - 457
[15] Assessment of Delamination Damage in Carbon Fibre Reinforced Polymer Composites with a Fastener Under Multiple Lightning Strike Conditions
Tian, Xiangyu
Sun, Jinru
Sun, Wei
Yao, Xueling
Xu, Xianchao
Li, Shu
Chen, Jingliang
APPLIED COMPOSITE MATERIALS, 2024, 31 (04) : 1155 - 1172
[16] Response surface for delamination monitoring of graphite/epoxy composites using electric resistance change
Todoroki, A
Tanaka, Y
Shimamura, Y
STRUCTURAL HEALTH MONTORING 2000, 1999, : 308 - 316
[17] A rapid testing method for assessing mode I fatigue delamination of carbon fibre-reinforced polymer
Parareda, Sergi
Casellas, Daniel
Llobet, Jordi
Renart, Jordi
Mateo, Antonio
INTERNATIONAL JOURNAL OF FATIGUE, 2024, 187
[18] Delamination Detection in Glass-Fibre Reinforced Polymer (GFRP) Using Microwave Time Domain Reflectometry
Akbar, Muhammad F.
Jawad, Ghassan N.
Danoon, Laith R.
Sloan, Robin
2018 15TH EUROPEAN RADAR CONFERENCE (EURAD), 2018, : 253 - 256
[19] Avoiding carbon fibre reinforced polymer delamination during abrasive water jet piercing: a new piercing method
Ioan Alexandru Popan
Nicolae Balc
Alina Ioana Popan
The International Journal of Advanced Manufacturing Technology, 2022, 119 : 1139 - 1152
[20] Recycling of woven carbon-fibre-reinforced polymer composites using supercritical water
Knight, Chase C.
Zeng, Changchun
Zhang, Chuck
Wang, Ben
ENVIRONMENTAL TECHNOLOGY, 2012, 33 (06) : 639 - 644

← 1 2 3 4 5 →