OPTIMAL ELECTRODE POSITION FOR DELAMINATION DETECTION IN CARBON FIBRE REINFORCED POLYMER COMPOSITES USING ELECTRIC RESISTANCE CHANGE METHOD

被引：0
|
作者：
Kovalovs, Andrejs [1 ]
Chate, Andris [1 ]
机构：
[1] Riga Tech Univ, Riga, Latvia
来源：
18TH INTERNATIONAL SCIENTIFIC CONFERENCE ENGINEERING FOR RURAL DEVELOPMENT | 2019年
关键词：
CFRP; delamination; electrical resistance; non-destructive; ANSYS; LAMINATE;
D O I：
10.22616/ERDev2019.18.N234
中图分类号：
S2 [农业工程];
学科分类号：
0828 ;
摘要：
The electric resistance measure by the four probe method is used by various researchers for detection of the internal delamination in laminated carbon-fiber-reinforced polymers composite material. In the present study, the effect of spacing between probes on the crack detection efficiency has been investigated. The problem has been solved by the method of planning of the experiment and the response surface method by using the 2-D finite element model. The distance between the probes and the crack length has been selected as the parameter of the study. As a result, it was revealed, that in case of the crack growth, a decrease in the distance between the current and voltage probes has a greater effect on the detection of the crack than the change in the distance between only the current probes.
引用
收藏
页码：1180 / 1185
页数：6
相关论文
共 50 条
  • [31] Carbon fibre detection in polymer composites reinforced by chopped carbon fibres through digital image processing and machine learning
    Geier, Norbert
    Magyar, Gergely
    Giner, Jakob
    Lukacs, Tamas
    Poka, Gyorgy
    JOURNAL OF COMPOSITE MATERIALS, 2024, 58 (21) : 2379 - 2395
  • [32] Improving the delamination resistance and impact damage tolerance of carbon fibre-epoxy composites using multi-scale fibre toughening
    Ravindran, Anil R.
    Ladani, Raj B.
    Kinloch, Anthony J.
    Wang, Chun-Hui
    Mouritz, Adrian P.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2021, 150
  • [33] Resistance welding of carbon fibre reinforced polyetheretherketone composites using metal mesh and PEI film
    闫久春
    王晓林
    秦明
    赵新英
    杨士勤
    China Welding, 2004, (01) : 71 - 75
  • [34] An investigation into the drilling of fibre-reinforced polymer composites using the optical microscopy inspection method
    Curnick, P.
    INSIGHT, 2011, 53 (05) : 248 - 252
  • [35] Detection and characterisation of delamination damage propagation in Woven Glass Fibre Reinforced Polymer Composite using thermoelastic response mapping
    Kakei, Ayad
    Epaarachchi, J. A.
    Islam, Mainul
    Leng, J.
    Rajic, N.
    COMPOSITE STRUCTURES, 2016, 153 : 442 - 450
  • [36] Intelligent detection of delamination defect in curved structural quartz fiber reinforced polymer composites using terahertz technology
    Wang Q.
    Zhao B.
    Liu Q.
    Liu W.
    Gao J.
    Zhang P.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2023, 40 (03): : 1785 - 1796
  • [37] Thermosonic inspection of carbon fibre reinforced polymer composites using an airborne haptic ultrasonic phased array
    Watson, R.L.
    Billson, D.R.
    Hutchins, D.A.
    Ciampa, F.
    NDT and E International, 2022, 132
  • [38] DAMAGE EVALUATION OF CARBON-FIBRE REINFORCED POLYMER COMPOSITES USING ELECTROMAGNETIC COUPLED SPIRAL INDUCTORS
    Li, Z.
    Haigh, A. D.
    Soutis, C.
    Gibson, A. A. P.
    Sloan, R.
    Karimian, N.
    ADVANCED COMPOSITES LETTERS, 2015, 24 (03) : 53 - 56
  • [39] Damage monitoring of carbon fibre reinforced polymer composites using acoustic emission technique and deep learning
    Barile, Claudia
    Casavola, Caterina
    Pappalettera, Giovanni
    Kannan, Vimalathithan Paramsamy
    COMPOSITE STRUCTURES, 2022, 292
  • [40] Thermosonic inspection of carbon fibre reinforced polymer composites using an airborne haptic ultrasonic phased array
    Watson, R. L.
    Billson, D. R.
    Hutchins, D. A.
    Ciampa, F.
    NDT & E INTERNATIONAL, 2022, 132
12345