Joining of C/C composites by using B4C reinforced phosphate adhesive

被引：53
|
作者：
Wang, Mingchao [1 ]
Liu, Jiachen [1 ]
Du, Haiyan [1 ]
Hou, Feng [1 ]
Guo, Anran [1 ]
Liu, Shan [1 ]
Dong, Xue [1 ]
机构：
[1] Tianjin Univ, Sch Mat Sci & Engn, Key Lab Adv Ceram & Machining Technol, Minist Educ, Tianjin 300072, Peoples R China
来源：
CERAMICS INTERNATIONAL | 2014年 / 40卷 / 08期
基金：
中国国家自然科学基金;
关键词：
C; Fracture; Bonding; C/C composites; Heat-treatment; Mechanical characterization; CARBON-CARBON COMPOSITES; BONDING CARBON/CARBON COMPOSITES; ALUMINUM PHOSPHATE; FIBER COMPOSITES; OXIDATION; MICROSTRUCTURE; TEMPERATURE; BEHAVIOR; GLASS; PERFORMANCE;
D O I：
10.1016/j.ceramint.2014.03.123
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A B4C reinforced phosphate adhesive for bonding C/C composites was developed. The mechanical properties were tested at room temperature after bonded specimens were treated at different temperatures from room temperature to 1500 C. The results showed that the addition of B4C could greatly improve adhesive's mechanical properties due to the formation of borosilicate glass and the volume compensation came from B4C's oxidation. The shear strength of bonded specimens decreased gradually from 7.9 MPa at RT to 3.3 MPa at 900 degrees C; then it increased up to 4.1 MPa at 1300 degrees C; however, when the temperature was over 1300 degrees C, the value decreased again but still remained above 2 MPa. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码：11581 / 11591
页数：11
相关论文
共 50 条
  • [41] The deformation of B4C particle in the B4C/2024Al composites after high velocity impact
    Zhou, Zhisong
    Wu, Gaohui
    Jiang, Longtao
    Xu, Zhongguo
    MICRON, 2014, 67 : 107 - 111
  • [42] Joining of C/C-SiC using boron-modified phenolic resin with SiO2 and B4C additives
    Chen, Xiaofei
    Li, Shujie
    Chen, Zhijun
    MATERIALS AT HIGH TEMPERATURES, 2011, 28 (01) : 28 - 32
  • [43] Reactive Interaction in Hf–Nb–B4C and Hf–Nb–B4C–C Systems
    A. N. Astapov
    V. A. Pogodin
    I. V. Sukmanov
    Russian Metallurgy (Metally), 2024, 2024 (6) : 1391 - 1399
  • [44] Optimization of Al Matrix Reinforced with B4C Particles
    Mohsen Ostad Shabani
    Ali Mazahery
    JOM, 2013, 65 : 272 - 277
  • [45] Processing of orthotropic and isotropic superhard B4C composites reinforced with reduced graphene oxide
    Ojalvo, Cristina
    Moreno, Rodrigo
    Guiberteau, Fernando
    Ortiz, Angel L.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2020, 40 (09) : 3406 - 3413
  • [46] Mechanical characterization of B4C reinforced aluminum matrix composites produced by squeeze casting
    Ipekoglu, Mehmet
    Nekouyan, Amin
    Albayrak, Onder
    Altintas, Sabri
    JOURNAL OF MATERIALS RESEARCH, 2017, 32 (03) : 599 - 605
  • [47] Optimization of Al Matrix Reinforced with B4C Particles
    Shabani, Mohsen Ostad
    Mazahery, Ali
    JOM, 2013, 65 (02) : 272 - 277
  • [48] Microstructure and Tensile Behaviour of B4C Reinforced ZA43 Alloy Composites
    Adaveesh, B.
    Halesh, G. M.
    Nagaral, Madeva
    Kumar, Mohan T. S.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2016), 2016, 149
  • [49] Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles
    Zhang, Zhihui
    Topping, Troy
    Li, Ying
    Vogt, Rustin
    Zhou, Yizhang
    Haines, Chris
    Paras, Joseph
    Kapoor, Deepak
    Schoenung, Julie M.
    Lavernia, Enrique J.
    SCRIPTA MATERIALIA, 2011, 65 (08) : 652 - 655
  • [50] Study of the tribological behavior of B4C reinforced MoSi2 based composites
    Yan, Feng-Yuan
    Lin, Xin-Hua
    Lu, Jin-Jun
    Qi, Shang-Kui
    Mocaxue Xuebao/Tribology, 2002, 22 (04): : 263 - 267
12345