Continuous mixing of powder rubber on the twin screw extruder

被引：0

作者：

Uphus, R ^{[1
]}

Skibba, O ^{[1
]}

Schuster, RH ^{[1
]}

Görl, U ^{[1
]}

机构：

[1] DIK EV, Proc Dept, D-30519 Hannover, Germany

来源：

KAUTSCHUK GUMMI KUNSTSTOFFE | 2000年 / 53卷 / 05期

关键词：

twin screw extruder; continuous mixing; screw elements; process development;

D O I：

暂无

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

For the development of a continuous mixing process on the twin screw extruder it is important to choose the best screw elements. In this work a comparison between the different dispersiv mixing elements is done. The paper shows also the influence of the other parameters on the mixing process like feed rate, screw speed and the pressure build up in the die. The aims pursued here developing a continuous mixing process with powder rubber are to achieve good dispersion of the filler and a low mixing temperature in order to prevent scorching of the rubber compound.

引用

页码：279 / 289

页数：11

共 50 条

[41] Modeling on the dynamic analysis of the rubber devulcanization in the counter-rotating twin screw extruder
Zhang, Youjun
Ren, Dongyun
Zhang, Liqun
Shi, Jinwei
Hu, Xueyong
Lin, Xiang
Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2013, 29 (11): : 168 - 172
[42] Styrene/Butadiene Rubber Prepared by Anionic Bulk Polymerization in a Twin-Screw Extruder
Wang, Jiming
Shan, Dong
Yang, Long
Liu, Weixing
Chen, Bo
Zheng, Anna
ADVANCES IN POLYMER TECHNOLOGY, 2016, 35 (01)
[43] EFFECT OF PARTICLE SIZE ON ULTRASONIC DEVULCANIZATION OF TIRE RUBBER IN TWIN-SCREW EXTRUDER
Isayev, Avraam I.
Liang, Tian
Lewis, Todd M.
RUBBER CHEMISTRY AND TECHNOLOGY, 2014, 87 (01): : 86 - 102
[44] Powder agglomeration in continuous powder feeding by twin-screw feeder
Liu, Zhanjie
Muzzio, Fernando J.
Callegari, Gerardo
POWDER TECHNOLOGY, 2024, 444
[45] Continuous polymerization and copolymerization of lauryl lactam in a modular corotating twin screw extruder
Ha, SK
White, JL
INTERNATIONAL POLYMER PROCESSING, 1998, 13 (02) : 136 - 141
[46] Continuous Reactive Compounding of Elastomeric Alloys based on Ground Tyre Rubber and Polypropylene in a Co-rotating Twin Screw Extruder
Wiessner, S.
Wagenknecht, U.
Heinrich, G.
Michael, H.
Mennig, G.
KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, 2012, 65 (04): : 28 - 36
[47] THE MODELING OF CONTINUOUS MIXERS .1. THE COROTATING TWIN-SCREW EXTRUDER
MEIJER, HEH
ELEMANS, PHM
POLYMER ENGINEERING AND SCIENCE, 1988, 28 (05): : 275 - 290
[48] Continuous polymerization of ω-lauryl lactam in an intermeshing corotating twin-screw extruder
Kim, I
White, JL
JOURNAL OF APPLIED POLYMER SCIENCE, 2005, 97 (04) : 1605 - 1620
[49] Continuous Polymerization of ε-Caprolactone Initiated by Titanium Phenoxide in a Twin-Screw Extruder
Machado, A. V.
Bounor-Legare, V.
Goncalves, N. D.
Melis, F.
Cassagnau, P.
Michel, A.
JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 110 (06) : 3480 - 3487
[50] MIXING IN AN INTERMESHING TWIN SCREW EXTRUDER CHAMBER - COMBINED CROSS AND DOWN CHANNEL FLOW
MAHESHRI, JC
WYMAN, CE
POLYMER ENGINEERING AND SCIENCE, 1980, 20 (09): : 601 - 607

← 1 2 3 4 5 →