Continuous mixing of powder rubber on the twin screw extruder

被引：0
|
作者：
Uphus, R [1 ]
Skibba, O [1 ]
Schuster, RH [1 ]
Görl, U [1 ]
机构：
[1] DIK EV, Proc Dept, D-30519 Hannover, Germany
来源：
KAUTSCHUK GUMMI KUNSTSTOFFE | 2000年 / 53卷 / 05期
关键词：
twin screw extruder; continuous mixing; screw elements; process development;
D O I：
暂无
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
For the development of a continuous mixing process on the twin screw extruder it is important to choose the best screw elements. In this work a comparison between the different dispersiv mixing elements is done. The paper shows also the influence of the other parameters on the mixing process like feed rate, screw speed and the pressure build up in the die. The aims pursued here developing a continuous mixing process with powder rubber are to achieve good dispersion of the filler and a low mixing temperature in order to prevent scorching of the rubber compound.
引用
收藏
页码：279 / 289
页数：11
相关论文
共 50 条
  • [21] Validation of a continuous granulation process using a twin-screw extruder
    Van Melkebeke, B.
    Vervaet, C.
    Remon, J. P.
    INTERNATIONAL JOURNAL OF PHARMACEUTICS, 2008, 356 (1-2) : 224 - 230
  • [22] Continuous granulation with a twin-screw extruder: Impact of material throughput
    Djuric, Dejan
    Kleinebudde, Peter
    PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY, 2010, 15 (05) : 518 - 525
  • [23] Continuous Drying of Pharmaceutical Powders Using a Twin-Screw Extruder
    Kreimer, Manuel
    Aigner, Isabella
    Lepek, Daniel
    Khinast, Johannes
    ORGANIC PROCESS RESEARCH & DEVELOPMENT, 2018, 22 (07) : 813 - 823
  • [24] Continuous pretreatment of sugarcane biomass using a twin-screw extruder
    Moro, Mariana Kuster
    Sobral Teixeira, Ricardo Sposina
    da Silva, Ayla Sant'Ana
    Fujimoto, Maristela Duarte
    Melo, Priamo Albuquerque
    Secchi, Argimiro Resende
    da Silva Bon, Elba Pinto
    INDUSTRIAL CROPS AND PRODUCTS, 2017, 97 : 509 - 517
  • [25] Study of mixing of liquid/polymer in twin screw extruder by residence time distribution
    Cassagnau, P
    Courmont, M
    Melis, F
    Puaux, JP
    POLYMER ENGINEERING AND SCIENCE, 2005, 45 (07): : 926 - 934
  • [26] Mixing immiscible blends in an intermeshing counter-rotating twin screw extruder
    Potluri, Ramesh
    Todd, David
    Gogos, Costas
    ADVANCES IN POLYMER TECHNOLOGY, 2006, 25 (02) : 81 - 89
  • [27] Polymer blend mixing and dispersion in the kneading section of a twin-screw extruder
    Huneault, MA
    Champagne, MF
    Luciani, A
    POLYMER ENGINEERING AND SCIENCE, 1996, 36 (12): : 1694 - 1706
  • [28] On the Use of a Twin Screw Extruder for Continuous Solid Feeding and Dissolution for Continuous Flow Processes
    McLaughlin, Arabella M.
    Robertson, John
    Ni, Xiong-Wei
    ORGANIC PROCESS RESEARCH & DEVELOPMENT, 2018, 22 (10) : 1373 - 1382
  • [29] Blending of immiscible polymers in a mixing zone of a twin screw extruder - Effects of compatibilization
    Franzheim, O
    Rische, T
    Stephan, M
    MacKnight, WJ
    POLYMER ENGINEERING AND SCIENCE, 2000, 40 (05): : 1143 - 1156
  • [30] Upscaling of a Batch De-Vulcanization Process for Ground Car Tire Rubber to a Continuous Process in a Twin Screw Extruder
    Saiwari, Sitisaiyidah
    van Hoek, Johannes W.
    Dierkes, Wilma K.
    Reuvekamp, Louis E. A. M.
    Heideman, Geert
    Blume, Anke
    Noordermeer, Jacques W. M.
    MATERIALS, 2016, 9 (09):
12345