Continuous mixing of powder rubber on the twin screw extruder

被引：0
|
作者：
Uphus, R [1 ]
Skibba, O [1 ]
Schuster, RH [1 ]
Görl, U [1 ]
机构：
[1] DIK EV, Proc Dept, D-30519 Hannover, Germany
来源：
KAUTSCHUK GUMMI KUNSTSTOFFE | 2000年 / 53卷 / 05期
关键词：
twin screw extruder; continuous mixing; screw elements; process development;
D O I：
暂无
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
For the development of a continuous mixing process on the twin screw extruder it is important to choose the best screw elements. In this work a comparison between the different dispersiv mixing elements is done. The paper shows also the influence of the other parameters on the mixing process like feed rate, screw speed and the pressure build up in the die. The aims pursued here developing a continuous mixing process with powder rubber are to achieve good dispersion of the filler and a low mixing temperature in order to prevent scorching of the rubber compound.
引用
收藏
页码：279 / 289
页数：11
相关论文
共 50 条
  • [11] Impact of Screw Elements on Continuous Granulation With a Twin-Screw Extruder
    Djuric, Dejan
    Kleinebudde, Peter
    JOURNAL OF PHARMACEUTICAL SCIENCES, 2008, 97 (11) : 4934 - 4942
  • [12] SINGLE-SCREW MIXING EXTRUDER - AN ALTERNATIVE TO TWIN-SCREW MIXERS
    ANDERS, D
    MULLER, W
    KUNSTSTOFFE-GERMAN PLASTICS, 1982, 72 (02): : 62 - 65
  • [13] SINGLE SCREW EXTRUDER OR TWIN-SCREW EXTRUDER
    HANSMANN, J
    GUMMI ASBEST KUNSTSTOFFE, 1978, 31 (09): : 632 - &
  • [14] Combining continuous mixer and twin screw extruder technologies into a twin screw, axial discharge compounder
    Canegallo, S
    Nekola, K
    POLYOLEFINS X - 10TH INTERNATIONAL CONFERENCE, 1997, : 251 - 259
  • [15] Hydrodynamics and mixing performance in a continuous miniature conical counter-rotating twin-screw extruder
    Xin, Sicheng
    Cheng, Wenkai
    Yang, Lisen
    Yin, Yaran
    Chen, Shichang
    Zhang, Xianming
    Chen, Wenxing
    INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2022, 20 (11) : 1117 - 1130
  • [16] EFFECT OF SCREW STAGGER ON MIXING IN A TANGENTIAL COUNTER-ROTATING TWIN SCREW EXTRUDER
    BIGIO, D
    ERWIN, L
    INTERNATIONAL POLYMER PROCESSING, 1989, 4 (04) : 242 - 246
  • [17] CONTINUOUS POLYMERIZATION STUDIES IN A TWIN-SCREW EXTRUDER.
    Stuber, Neil P.
    Tirrell, Matthew
    Polymer process engineering, 1983, 3 (1-2): : 71 - 83
  • [18] Flow patterns and mixing mechanisms in the screw mixing element of a co-rotating twin-screw extruder
    Ishikawa, T
    Amano, T
    Kihara, SI
    Funatsu, K
    POLYMER ENGINEERING AND SCIENCE, 2002, 42 (05): : 925 - 939
  • [19] Effectiveness of a Backward Mixing Screw Element for Glass Fiber Dispersion in a Twin-Screw Extruder
    Hirata, Kunihiro
    Ishida, Hiroshi
    Hiragohri, Motohito
    Nakayama, Yasuya
    Kajiwara, Toshihisa
    POLYMER ENGINEERING AND SCIENCE, 2014, 54 (09): : 2005 - 2012
  • [20] Characterization of waste tire rubber devulcanized in twin-screw extruder with thermoplastics
    Nunes, Anderson Thadeu
    dos Santos, Rubens Eduardo
    Pereira, Juliene Satiro
    Barbosa, Rafael
    Ambrosio, Jose Donato
    PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY, 2018, 34 (03) : 143 - 157
12345