Continuous mixing of powder rubber on the twin screw extruder

被引：0
|
作者：
Uphus, R [1 ]
Skibba, O [1 ]
Schuster, RH [1 ]
Görl, U [1 ]
机构：
[1] DIK EV, Proc Dept, D-30519 Hannover, Germany
来源：
KAUTSCHUK GUMMI KUNSTSTOFFE | 2000年 / 53卷 / 05期
关键词：
twin screw extruder; continuous mixing; screw elements; process development;
D O I：
暂无
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
For the development of a continuous mixing process on the twin screw extruder it is important to choose the best screw elements. In this work a comparison between the different dispersiv mixing elements is done. The paper shows also the influence of the other parameters on the mixing process like feed rate, screw speed and the pressure build up in the die. The aims pursued here developing a continuous mixing process with powder rubber are to achieve good dispersion of the filler and a low mixing temperature in order to prevent scorching of the rubber compound.
引用
收藏
页码：279 / 289
页数：11
相关论文
共 50 条
  • [1] Continuous mixing of powder rubber in a twin-screw extruder
    Amash, Ali
    Bogun, Martin
    Görl, Udo
    Schuster, Robert-Hans
    Rubber World, 2002, 226 (03): : 19 - 24
  • [2] Rubber/filler compound systems in powder form -: Continuous mixing on the twin screw extruder part III
    Bogun, M
    Luther, S
    Schuster, RH
    Görl, U
    Radusch, HJ
    KAUTSCHUK GUMMI KUNSTSTOFFE, 2004, 57 (12): : 633 - +
  • [3] Continuous compounding of silica filled rubber in a twin screw extruder
    Haberstroh, E.
    Koeppen, H.
    KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, 2008, 61 (1-2): : 20 - +
  • [4] Mixing characteristics of rubber in a twin screw extruder based on drag flow
    Gasner, G
    Bigio, D
    Kiehl, C
    Magnus, F
    ANTEC '96: PLASTICS - RACING INTO THE FUTURE, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPACIAL AREAS, 1996, 42 : 324 - 328
  • [5] Experimental study of the rubber mixing process using a corotating twin screw extruder
    Luther, S.
    Bogun, M.
    Schuster, R. H.
    Gorl, U.
    KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, 2006, 59 (09): : 473 - 478
  • [6] Experimental study of the rubber mixing process using a corotating twin screw extruder
    Deutsches Institut für Kautschuktechnologie e.V., Eupener Str. 33, 30519 Hannover
    KGK Kautsch. Gummi Kunstst., 2006, 9 (473-478):
  • [7] Recycling of waste tire rubber powder - Devulcanization in a counter rotating twin screw extruder
    Maridass, B
    Gupta, BR
    KAUTSCHUK GUMMI KUNSTSTOFFE, 2003, 56 (05): : 232 - 236
  • [8] Dry Powder Mixing Is Feasible in Continuous Twin Screw Extruder: Towards Lean Extrusion Process for Oral Solid Dosage Manufacturing
    Mateo-Ortiz, Daniel
    Villanueva-Lopez, Vladimir
    Muddu, Shashank Venkat
    Doddridge, Gregory D.
    Alhasson, Dana
    Dennis, Michael C.
    AAPS PHARMSCITECH, 2021, 22 (07)
  • [9] Dry Powder Mixing Is Feasible in Continuous Twin Screw Extruder: Towards Lean Extrusion Process for Oral Solid Dosage Manufacturing
    Daniel Mateo-Ortiz
    Vladimir Villanueva-Lopez
    Shashank Venkat Muddu
    Gregory D. Doddridge
    Dana Alhasson
    Michael C. Dennis
    AAPS PharmSciTech, 22
  • [10] Continuous Chemical Recycling of Polystyrene with a Twin - Screw Extruder
    Schaefer, Philipp
    Hopmann, Christian
    Facklam, Martin
    Hollerbach, Laura
    Kolb, Tristan
    Schedl, Andreas
    Schmidt, Hans-Werner
    Nosic, Franziska
    Wilhelmus, Bianca
    ADVANCES IN POLYMER PROCESSING 2020: PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ON PLASTICS TECHNOLOGY, 2020, : 37 - 49
12345