Accurate fault location element for series compensated double-circuit transmission lines utilizing negative-sequence phasors

被引:12
|
作者
Nemati, Mojtaba [1 ]
Bigdeli, Mehdi [1 ]
Ghorbani, Amir [2 ]
Mehrjerdi, Hasan [3 ]
机构
[1] Islamic Azad Univ, Dept Elect Engn, Zanjan Branch, Zanjan, Iran
[2] Islamic Azad Univ, Dept Elect Engn, Abhar Branch, Abhar, Iran
[3] Qatar Univ, Dept Elect Engn, Doha, Qatar
关键词
Fault location element (FLE); fault resistance; series compensated lines; double-circuit transmission lines; MOV-protected SC;
D O I
10.1016/j.epsr.2021.107064
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Obtaining the accurate fault location in the series compensated double-circuit transmission lines (SCDCTL) is a challenge due to the presence of series compensator, fault resistance, and mutual the coupling between parallel lines. Although by using the pilot fault location methods, the effect of all the aforementioned factors can be eliminated and the location of the fault can be calculated. However, the number of communication channels available for pilot schemes is limited. In addition, the reliability of the communication links for long transmission lines may be particularly reduced. On the other hand, most of the non-pilot methods need to calculate the series compensator data and the accuracy of the fault location in them depends on the accuracy of the series compensator parameters. To improve the limitation of conventional impedance-based methods, this paper presents a non-pilot accurate fault location element (FLE) for conventional distance relays in SCDCTL. The main concept of the proposed method is considering the proper Kirchhoff voltage law (KVL) loop in the negative sequence circuit of SCDCTL. Consideration of the shunt capacitances of lines ensures accuracy of the achieved fault location formula. It is shown that the designed FLE can improve limitations associated with similar methods such as the dependence of these methods to the fault resistance, mutual coupling between the parallel lines, and the series compensator (SC) parameters. To investigate the performance of the proposed FLE, several factors are considered in the simulation analysis including different fault resistances, fault locations, and fault types. Besides, the influence of current transformer (CT) saturation, measurement errors, external faults, bypassing of the Metal Oxide Varistor (MOV), and effect of noise on the proposed scheme is studied. Evaluation study using PSCAD verify the effectiveness and applicability of the proposed scheme.
引用
收藏
页数:16
相关论文
共 50 条
  • [21] Fault Location on Double-Circuit Series-Compensated Lines Using Two-End Unsynchronized Measurements
    Izykowski, Jan
    Rosolowski, Eugeniusz
    Balcerek, Przemyslaw
    Fulczyk, Marek
    Saha, Murari Mohan
    IEEE TRANSACTIONS ON POWER DELIVERY, 2011, 26 (04) : 2072 - 2080
  • [22] Accurate Fault Location for Double-Circuit Lines on the Same Tower with Asymmetrical Parameters
    Zhu Yiyang
    Du Hongji
    PROCEEDINGS OF THE6TH INTERNATIONAL CONFERENCE ON MECHATRONICS, MATERIALS, BIOTECHNOLOGY AND ENVIRONMENT (ICMMBE 2016), 2016, 83 : 175 - 181
  • [23] Fault location estimation for series-compensated double-circuit transmission line using EWT and weighted RVFLN
    Sahani, Mrutyunjaya
    Dash, P. K.
    ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE, 2020, 88
  • [24] Fault location on double-circuit transmission lines by phase correction of fault recorder signals without accurate time synchronization
    Peng, Nan
    Zhou, Lutian
    Liang, Rui
    Xue, Xue
    Piliposyan, Gor
    Hu, Yihua
    ELECTRIC POWER SYSTEMS RESEARCH, 2020, 181
  • [25] Location of double-circuit grounded cross-country faults in GUPFC-compensated transmission lines based on current and voltage phasors analysis
    Abasi, Mahyar
    Saffarian, Alireza
    Joorabian, Mahmood
    Seifossadat, Seyed Ghodratollah
    ELECTRIC POWER SYSTEMS RESEARCH, 2021, 195
  • [26] A Fault Location Algorithm for Two-End Series-Compensated Double-Circuit Transmission Lines Using the Distributed Parameter Line Model
    Kang, Ning
    Gombos, Gergely
    Mousavi, Mirrasoul J.
    Feng, Xiaoming
    ELECTRIC POWER COMPONENTS AND SYSTEMS, 2017, 45 (06) : 615 - 623
  • [27] Inter-circuit fault location algorithm in generalized unified power flow controller-compensated double-circuit transmission lines based on synchronous current and voltage phasors of line terminals
    Abasi, Mahyar
    Joorabian, Mahmood
    Saffarian, Alireza
    Seifossadat, Seyed Ghodratollah
    IET GENERATION TRANSMISSION & DISTRIBUTION, 2021, 15 (12) : 1841 - 1857
  • [28] Digital fault location for parallel double-circuit multi-terminal transmission lines
    Funabashi, T
    Otoguro, H
    Mizuma, Y
    Dube, L
    Ametani, A
    IEEE TRANSACTIONS ON POWER DELIVERY, 2000, 15 (02) : 531 - 537
  • [29] Optimization-based Fault Location on Double-Circuit Transmission Lines of Power Systems
    Huynh, Duy C.
    Truong, Thanh H.
    Dunnigan, Matthew W.
    2021 5TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONICS, COMMUNICATION, COMPUTER TECHNOLOGIES AND OPTIMIZATION TECHNIQUES (ICEECCOT), 2021, : 746 - 751
  • [30] A Novel Fault Location Algorithmfor Double-Circuit Transmission Lines based on Distributed Parameter
    商立群
    施围
    电工电能新技术, 2006, (01) : 13 - 16+20