Developing the high energy performance standards for oil-injected air-cooled screw air compressor for Thailand

被引：3
|
作者：
Wiratkasem, Kengkamon [1 ]
Pattana, Somchai [1 ]
Tippayawong, Korrakot Yaibuathet [1 ]
Tippayawong, Nakorn [1 ]
机构：
[1] Chiang Mai Univ, Fac Engn, Dept Mech Engn, Chiang Mai 50200, Thailand
来源：
ENERGY REPORTS | 2020年 / 6卷
关键词：
Energy efficiency; Screw air compressor; Air-cooled oil-injected; HEPS;
D O I：
10.1016/j.egyr.2019.11.128
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
The objective of this wok was to develop the high energy performance standards (HEPS) for oil-injected air-cooled screw air compressors in Thailand. Based on the data from the Customs Department in 2018, it was found that Thailand imported a great number of air compressors with total value of more than 60 million USD. In this study, the energy performance of the air compressors was evaluated from standardized tests, and the energy performance data was used to analyze the energy efficiency standards using statistical principles of normal curves and standard scores. The criteria used in determining the HEPS was that about 30% of the products must have the specific power higher than the HEPS value. The HEPS value was shown in the form of equations to be able to use with all the power input. If it is promoted to adopt this HEPS, Thailand will have the potential to save energy by about 37,305,000 kWh/year. (C) 2019 Published by Elsevier Ltd.
引用
收藏
页码：617 / 621
页数：5
相关论文
共 50 条
  • [31] REPAIR OF AIR-COOLED TURBINE VANES OF HIGH-PERFORMANCE AIRCRAFT ENGINES - PROBLEMS AND EXPERIENCE
    BRAUNY, P
    HAMMERSCHMIDT, M
    MALIK, M
    MATERIALS SCIENCE AND TECHNOLOGY, 1985, 1 (08) : 635 - 635
  • [32] Design of an Integrated Loop Heat Pipe Air-Cooled Heat Exchanger for High Performance Electronics
    Peters, Teresa B.
    McCarthy, Matthew
    Allison, Jon
    Dominguez-Espinosa, F. Alonso
    Jenicek, David
    Kariya, H. Arthur
    Staats, Wayne L.
    Brisson, John G.
    Lang, Jeffrey H.
    Wang, Evelyn N.
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2012, 2 (10): : 1637 - 1648
  • [33] REPAIR OF AIR-COOLED TURBINE VANES OF HIGH-PERFORMANCE AIRCRAFT ENGINES - PROBLEMS AND EXPERIENCE
    BRAUNY, P
    HAMMERSCHMIDT, M
    MALIK, M
    MATERIALS SCIENCE AND TECHNOLOGY, 1985, 1 (09) : 719 - 727
  • [34] Theoretical and experimental studies on oil injected twin-screw air compressor when compressing different light and heavy gases
    Seshaiah, N.
    Sahoo, R. K.
    Sarangi, S. K.
    APPLIED THERMAL ENGINEERING, 2010, 30 (04) : 327 - 339
  • [35] Energy performance of GCC-specification LCC optimized dedicated outdoor air system configurations coupled to an air-cooled outdoor unit
    Ali, Muhammad Tauha
    Sarfraz, Omer
    Armstrong, Peter R.
    ENERGY AND BUILDINGS, 2018, 158 : 417 - 428
  • [36] Performance of an air-cooled looped thermoacoustic engine capable of recovering low-grade thermal energy
    Tan, Jingqi
    Luo, Jiaqi
    Wang, Yi
    Wei, Jianjian
    Jin, Tao
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2020, 44 (04) : 2682 - 2692
  • [37] Air-cooled photovoltaic roof tile as an example of the BIPVT system - An experimental study on the energy and exergy performance
    Wajs, Jan
    Golabek, Aleksandra
    Bochniak, Roksana
    Mikielewicz, Dariusz
    ENERGY, 2020, 197
  • [38] Influence of oil injection parameters on the performance of diesel powered screw air compressor for water well application
    Dhayanandh, K. K.
    Rameshkumar, K.
    Sumesh, A.
    Lakshmanan, N.
    MEASUREMENT, 2020, 152
  • [39] Energy and Exergy Analysis for Improving the Energy Performance of Air-Cooled Liquid Chillers by Different Condensing-Coil Configurations
    Wu, Wu-Chieh
    Lee, Tzong-Shing
    Chang, Chich-Hsiang
    ENTROPY, 2012, 14 (03) : 517 - 532
  • [40] HIGH PERFORMANCE CHIP-COOLING TECHNIQUE FOR COLD PLATE OR EXTERNAL AIR-COOLED MODULES.
    Hassan, J.K.
    Oktay, S.
    Ostergren, C.D.
    Paivanas, J.A.
    1984, (26):
12345