Developing the high energy performance standards for oil-injected air-cooled screw air compressor for Thailand

被引：3

作者：

Wiratkasem, Kengkamon ^{[1
]}

Pattana, Somchai ^{[1
]}

Tippayawong, Korrakot Yaibuathet ^{[1
]}

Tippayawong, Nakorn ^{[1
]}

机构：

[1] Chiang Mai Univ, Fac Engn, Dept Mech Engn, Chiang Mai 50200, Thailand

来源：

ENERGY REPORTS | 2020年 / 6卷

关键词：

Energy efficiency; Screw air compressor; Air-cooled oil-injected; HEPS;

D O I：

10.1016/j.egyr.2019.11.128

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

The objective of this wok was to develop the high energy performance standards (HEPS) for oil-injected air-cooled screw air compressors in Thailand. Based on the data from the Customs Department in 2018, it was found that Thailand imported a great number of air compressors with total value of more than 60 million USD. In this study, the energy performance of the air compressors was evaluated from standardized tests, and the energy performance data was used to analyze the energy efficiency standards using statistical principles of normal curves and standard scores. The criteria used in determining the HEPS was that about 30% of the products must have the specific power higher than the HEPS value. The HEPS value was shown in the form of equations to be able to use with all the power input. If it is promoted to adopt this HEPS, Thailand will have the potential to save energy by about 37,305,000 kWh/year. (C) 2019 Published by Elsevier Ltd.

引用

页码：617 / 621

页数：5

共 50 条

[21] INVESTIGATION OF A MULTIPLE IMPELLER DESIGN FOR A HIGH PERFORMANCE AIR-COOLED HEAT SINK
Staats, Wayne L.
Peters, Teresa B.
Allison, Jon M.
McCarthy, Matthew
Wang, Evelyn N.
Brisson, John G.
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2010, VOL 7, PTS A AND B, 2012, : 313 - 320
[22] High Performance Air-Cooled Temperature Margining Thermal Tools for Silicon Validation
Mohammed, Rahima
Sahan, Ridvan
Xia, Yi
Pang, Ying-feng
2011 27TH ANNUAL IEEE SEMICONDUCTOR THERMAL MEASUREMENT AND MANAGEMENT SYMPOSIUM (SEMI-THERM), 2011, : 265 - 271
[23] Modelling of improved energy performance of air-cooled chillers with mist pre-cooling
Yu, F. W.
Chan, K. T.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2009, 48 (04) : 825 - 836
[24] Energy efficiency and performance considerations of variable frequency drives for air-cooled heat exchangers
Endrejat, F
van Niekerk, HR
Delport, GJ
IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE 98) - PROCEEDINGS, VOLS 1 AND 2, 1998, : 312 - 316
[25] Performance of bypass cycle defrosting system using compressor casing thermal storage for air-cooled household refrigerators
Liu, Zhongbao
Zhao, Fei
Zhang, Lingfei
Zhang, Ran
Yuan, Meng
Chi, Yuanying
APPLIED THERMAL ENGINEERING, 2018, 130 : 1215 - 1223
[26] LIGHTWEIGHT, HIGH PERFORMANCE, AIR-COOLED DIESEL ENGINE - HONDA-GD90
NOZAWA, Y
UNO, H
SAE TRANSACTIONS, 1968, 77 : 69 - &
[27] Thermodynamic performance of air-cooled seasonal cold energy storage for space cooling: A case study
Li, Tailu
Yu, Haifang
Qi, Jing
Yuan, Ye
RENEWABLE ENERGY, 2024, 235
[28] Analysis of an air-cooled chiller replacement project using a probabilistic approach for energy performance contracts
Lee, P.
Lam, P. T. I.
Lee, W. L.
Chan, E. H. W.
APPLIED ENERGY, 2016, 171 : 415 - 428
[29] Energy and exergy analyses of compressor inlet air-cooled gas turbines using the Joule-Brayton refrigeration cycle
Khaliq, A.
Choudhary, K.
Dincer, I.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2009, 223 (A1) : 1 - 9
[30] AIR-COMPRESSOR CAPACITY CONTROLS - A NECESSARY EVIL .2. OIL-COOLED ROTARY SCREW COMPRESSORS
VANORMER, HP
HYDRAULICS & PNEUMATICS, 1980, 33 (12) : 56 - &

← 1 2 3 4 5 →