Developing the high energy performance standards for oil-injected air-cooled screw air compressor for Thailand

被引：3

作者：

Wiratkasem, Kengkamon ^{[1
]}

Pattana, Somchai ^{[1
]}

Tippayawong, Korrakot Yaibuathet ^{[1
]}

Tippayawong, Nakorn ^{[1
]}

机构：

[1] Chiang Mai Univ, Fac Engn, Dept Mech Engn, Chiang Mai 50200, Thailand

来源：

ENERGY REPORTS | 2020年 / 6卷

关键词：

Energy efficiency; Screw air compressor; Air-cooled oil-injected; HEPS;

D O I：

10.1016/j.egyr.2019.11.128

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

The objective of this wok was to develop the high energy performance standards (HEPS) for oil-injected air-cooled screw air compressors in Thailand. Based on the data from the Customs Department in 2018, it was found that Thailand imported a great number of air compressors with total value of more than 60 million USD. In this study, the energy performance of the air compressors was evaluated from standardized tests, and the energy performance data was used to analyze the energy efficiency standards using statistical principles of normal curves and standard scores. The criteria used in determining the HEPS was that about 30% of the products must have the specific power higher than the HEPS value. The HEPS value was shown in the form of equations to be able to use with all the power input. If it is promoted to adopt this HEPS, Thailand will have the potential to save energy by about 37,305,000 kWh/year. (C) 2019 Published by Elsevier Ltd.

引用

页码：617 / 621

页数：5

共 50 条

[11] Lightweight and High-Performance Air-Cooled Heat Sinks
Shaeri, Mohammad Reza
Bonner, Richard W., III
PROCEEDINGS 2018 34TH ANNUAL SEMICONDUCTOR THERMAL MEASUREMENT, MODELLING & MANAGEMENT SYMPOSIUM (SEMI-THERM), 2018, : 224 - 227
[12] Modelling of the coefficient of performance of an air-cooled screw chiller with variable speed condenser fans
Yu, FW
Chan, KT
BUILDING AND ENVIRONMENT, 2006, 41 (04) : 407 - 417
[13] Theoretical and Experimental Studies on Oil Injected Twin Screw Air Compressor under Unload Conditions
Liang, Xiangjing
Wu, Wanrong
2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION, 2019, 252
[14] Development and performance diagnosis of a high power air-cooled PEMFC stack
Chen, Chen-Yu
Huang, Keng-Pin
Yan, Wei-Mon
Lai, Ming-Ping
Yang, Chen-Cheng
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2016, 41 (27) : 11784 - 11793
[15] Establishing Thermal Air-cooled Limit for High Performance Electronics Devices
Refai-Ahmed, Gamal
Do, Hoa
Hadad, Yaser
Rangarajan, Srikanth
Sammakia, Bahgat G.
Gektin, Vadim
Cader, Tahir
2020 IEEE 22ND ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC), 2020, : 347 - 354
[16] High-performance air-cooled heat sinks for power packages
Aranyosi, A
Bolle, L
Buyse, H
THERMAL MANAGEMENT OF ELECTRONIC SYSTEMS II, 1997, : 243 - 252
[17] Improving energy efficiency and developing an air-cooled grate for the downdraft rice husk furnace
Nguyen Van Hung
Quilloy, Reianne
Gummert, Martin
RENEWABLE ENERGY, 2018, 115 : 969 - 977
[18] COOLING EFFECTIVENESS OF MIST PRECOOLER FOR IMPROVING ENERGY PERFORMANCE OF AIR-COOLED CHILLER
Yu, Fu Wing
Chan, Kwok Tai
Yang, Jia
Sit, Rachel Kam Yung
THERMAL SCIENCE, 2018, 22 (01): : 193 - 204
[19] EXPERIMENTAL STUDIES OF ENERGY PERFORMANCE OF AIR-COOLED CHILLERS WITH WATER MIST SYSTEM
Yang, Jia
Chan, Kwok-tai
Wu, Xiang-sheng
PROCEEDINGS OF THE SECOND INTERNATIONAL POSTGRADUATE CONFERENCE ON INFRASTRUCTURE AND ENVIRONMENT, VOL 1, 2010, : 21 - 30
[20] Evaporative cooling technologies for air-cooled chillers for building energy performance improvement
Yu, F. W.
Chan, K. T.
Yang, J.
Sit, R. K. Y.
ADVANCES IN BUILDING ENERGY RESEARCH, 2016, 10 (01) : 10 - 19

← 1 2 3 4 5 →