Optimization of Machining Parameters for Minimization of Roundness Error in Deep Hole Drilling using Minimum Quantity Lubricant

被引：2

作者：

Kamaruzaman, Anis Farhan ^{[1
]}

Zain, Azlan Mohd ^{[1
]}

Yusof, Noordin Mohd. ^{[2
]}

Nadjarian, Farhad ^{[2
]}

机构：

[1] Univ Teknol Malaysia, Fac Comp, Soft Comp Res Grp, Skudai 81310, Johor, Malaysia

[2] Univ Teknol Malaysia, Fac Mech Engn, Skudai 81310, Johor, Malaysia

来源：

2ND INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2016 (ICONGDM 2016) | 2016年 / 78卷

关键词：

INCONEL; 718; SYSTEM;

D O I：

10.1051/matecconf/20167801024

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents an experimental investigation of deep hole drilling using CNC milling machine. This experiment investigates the effect of machining parameters which are spindle speed, feed rate and depth of hole using minimum quantity lubricant on the roundness error. The experiment was designed using two level full factorial with four center point. Finally, the machining parameters were optimized in obtaining the minimum value of roundness error. The minimum value of roundness error for deep hole drilling is 0.0266 at the spindle speed is 800 rpm, feed rate is 60 mm/min, depth of hole is 70 mm and minimum quantity lubricant is 30ml/hr.

引用

页数：6

共 50 条

[41] Optimization of process parameters in turning operation using CNT based minimum quantity lubrication (MQL)
Jagatheesan K.
Babu K.
Madhesh D.
Materials Today: Proceedings, 2023, 72 : 2552 - 2556
[42] Interaction Effect of Machining Parameters on Material Removal Rate in the Machining of AA6061-T6 Using Minimum Quantity Lubrication Conditions
Najiha, M. S.
Rahman, M. M.
Kadirgama, K.
Ramasamy, D.
2019 7TH INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME), 2020, 831
[43] Optimization of Process Parameters with Minimum Thrust Force and Torque in Drilling Operation Using Taguchi Method
Neseli, Suleyman
ADVANCES IN MECHANICAL ENGINEERING, 2014,
[44] Locator Placement Optimization for Minimum Part Positioning Error During Machining Operation Using Genetic Algorithm
Sajid Ullah Butt
Mamoona Arshad
Aamer Ahmed Baqai
Hasan Aftab Saeed
Naveed Akmal Din
Rehan Ahmed Khan
International Journal of Precision Engineering and Manufacturing, 2021, 22 : 813 - 829
[45] Locator Placement Optimization for Minimum Part Positioning Error During Machining Operation Using Genetic Algorithm
Butt, Sajid Ullah
Arshad, Mamoona
Baqai, Aamer Ahmed
Saeed, Hasan Aftab
Din, Naveed Akmal
Khan, Rehan Ahmed
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2021, 22 (05) : 813 - 829
[46] Optimization of Cutting Parameters in Hole Machining Process by Using Multi-objective Taguchi Approach
Kahraman, Funda
Basar, Gokhan
Kocoglu, Zulfu
Yeniyil, Emre
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2018, 21 (02): : 283 - 290
[47] Response optimization using VIKOR while machining on lathe under dry and minimum quantity and lubrication conditions - A case study
Vikram, K. Arun
Kanth, T. V. Krishna
Shabana
Prasad, R. D. V.
MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 2487 - 2491
[48] Optimization of Machining Parameters for Drilling Al-SiC MMC Using ANOVA and Grey Relational Analysis
Dhavamani, C.
Alwarsamy, T.
DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 610 - +
[49] A coupling method of response surfaces (CRSM) for cutting parameters optimization in machining titanium alloy under minimum quantity lubrication (MQL) condition
Liu, ZhiQiang
Xu, Jinyang
Han, Shu
Chen, Ming
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2013, 14 (05) : 693 - 702
[50] A coupling method of response surfaces (CRSM) for cutting parameters optimization in machining titanium alloy under minimum quantity lubrication (MQL) condition
ZhiQiang Liu
Jinyang Xu
Shu Han
Ming Chen
International Journal of Precision Engineering and Manufacturing, 2013, 14 : 693 - 702

← 1 2 3 4 5 →