Optimization of Machining Parameters for Minimization of Roundness Error in Deep Hole Drilling using Minimum Quantity Lubricant

被引：2
|
作者：
Kamaruzaman, Anis Farhan [1 ]
Zain, Azlan Mohd [1 ]
Yusof, Noordin Mohd. [2 ]
Nadjarian, Farhad [2 ]
机构：
[1] Univ Teknol Malaysia, Fac Comp, Soft Comp Res Grp, Skudai 81310, Johor, Malaysia
[2] Univ Teknol Malaysia, Fac Mech Engn, Skudai 81310, Johor, Malaysia
来源：
2ND INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2016 (ICONGDM 2016) | 2016年 / 78卷
关键词：
INCONEL; 718; SYSTEM;
D O I：
10.1051/matecconf/20167801024
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents an experimental investigation of deep hole drilling using CNC milling machine. This experiment investigates the effect of machining parameters which are spindle speed, feed rate and depth of hole using minimum quantity lubricant on the roundness error. The experiment was designed using two level full factorial with four center point. Finally, the machining parameters were optimized in obtaining the minimum value of roundness error. The minimum value of roundness error for deep hole drilling is 0.0266 at the spindle speed is 800 rpm, feed rate is 60 mm/min, depth of hole is 70 mm and minimum quantity lubricant is 30ml/hr.
引用
收藏
页数：6
相关论文
共 50 条
  • [31] Optimization of Parameters and Sustainability Assessment Under Minimum Quantity Solid Lubrication-Assisted Machining of Inconel 718
    M. A. Makhesana
    K. M. Patel
    Process Integration and Optimization for Sustainability, 2021, 5 : 625 - 644
  • [32] Optimization of hole quality parameters using TOPSIS method in drilling of GFRP composite
    Niranjan, T.
    Singaravel, B.
    Raju, S. Srinivasulu
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 2109 - 2114
  • [33] Optimization of hole quality parameters using TOPSIS method in drilling of GFRP composite
    Niranjan, T.
    Singaravel, B.
    Raju, S. Srinivasulu
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 2109 - 2114
  • [34] Experimental study on drilling burr formation minimization and parameters optimization using BBO algorithm
    Mondal, Nripen
    Das Sourav, Sourav
    Banerjee, Tanumoy
    Mandal, Madhab Chandra
    MATERIALS TODAY-PROCEEDINGS, 2022, 56 : 2586 - 2590
  • [35] A critical assessment of lubrication techniques in machining processes: a case for minimum quantity lubrication using vegetable oil-based lubricant
    Lawal, Sunday Albert
    Choudhury, Imtiaz Ahmed
    Nukman, Yusoff
    JOURNAL OF CLEANER PRODUCTION, 2013, 41 : 210 - 221
  • [36] Multiobjective Optimization of Cutting Parameters for TA10 Alloy Deep-Hole Drilling
    Feng, Yazhou
    Zheng, Huan
    Han, Xiaolan
    Liu, Zhanfeng
    MATERIALS, 2022, 15 (12)
  • [37] Experimental Study on optimizing the effect of drilling parameters on roundness error of holes of Aluminum 7075 using Response Surface Methodology
    Zargar, S. H.
    Tahmasbi, V.
    Besharati, K.
    Farzami, M.
    FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 184-185 : 981 - +
  • [38] Minimum quantity of lubricant drilling of stainless steel using refined palm olein: Effect of coating tool on surface roughness and tool wear
    Sultan, Ahmad Zubair
    Sharif, Safian
    Nor, Fethma M.
    Kurniawan, Denni
    DIGITAL MANUFACTURING TRANSFORMING INDUSTRY TOWARDS SUSTAINABLE GROWTH, 2019, 30 : 427 - 434
  • [39] OPTIMIZATION OF LASER DEEP-HOLE DRILLING OF INCONEL 718 USING THE TAGUCHI METHOD
    TAM, SC
    YEO, CY
    JANA, S
    LAU, MWS
    LIM, LEN
    YANG, LJ
    NOOR, YM
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1993, 37 (1-4) : 741 - 757
  • [40] Optimization of EDM Hole Drilling Parameters in Machining of MoSi2-SiC Intermetallic/Composites for Improving Geometrical Tolerances
    Selvarajan, L.
    Narayanan, C. Sathiya
    Jeyapaul, R.
    JOURNAL OF ADVANCED MANUFACTURING SYSTEMS, 2015, 14 (04) : 259 - 272
12345