Optimization of Machining Parameters for Minimization of Roundness Error in Deep Hole Drilling using Minimum Quantity Lubricant

被引：2
|
作者：
Kamaruzaman, Anis Farhan [1 ]
Zain, Azlan Mohd [1 ]
Yusof, Noordin Mohd. [2 ]
Nadjarian, Farhad [2 ]
机构：
[1] Univ Teknol Malaysia, Fac Comp, Soft Comp Res Grp, Skudai 81310, Johor, Malaysia
[2] Univ Teknol Malaysia, Fac Mech Engn, Skudai 81310, Johor, Malaysia
来源：
2ND INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2016 (ICONGDM 2016) | 2016年 / 78卷
关键词：
INCONEL; 718; SYSTEM;
D O I：
10.1051/matecconf/20167801024
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents an experimental investigation of deep hole drilling using CNC milling machine. This experiment investigates the effect of machining parameters which are spindle speed, feed rate and depth of hole using minimum quantity lubricant on the roundness error. The experiment was designed using two level full factorial with four center point. Finally, the machining parameters were optimized in obtaining the minimum value of roundness error. The minimum value of roundness error for deep hole drilling is 0.0266 at the spindle speed is 800 rpm, feed rate is 60 mm/min, depth of hole is 70 mm and minimum quantity lubricant is 30ml/hr.
引用
收藏
页数：6
相关论文
共 50 条
  • [21] Prediction and optimization of machining results and parameters in drilling by using Bayesian networks
    X. Wang
    R. Eisseler
    H.-C. Moehring
    Production Engineering, 2020, 14 : 373 - 383
  • [22] Experimentation and optimization of deep hole drilling parameters for SS316L
    Jayaprakash, Bharani Chandar
    Lenin, N.
    Kumar, M. Siva
    MATERIALS AND MANUFACTURING PROCESSES, 2023, 38 (06) : 770 - 781
  • [23] Prediction and optimization of machining results and parameters in drilling by using Bayesian networks
    Wang, X.
    Eisseler, R.
    Moehring, H-C
    PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT, 2020, 14 (03): : 373 - 383
  • [24] A STUDY ON MACHINING AND ENVIRONMENTAL CHARACTERISTICS OF MICRO-DRILLING PROCESS USING NANOFLUID MINIMUM QUANTITY LUBRICATION
    Nam, Jung Soo
    Lee, Pil-Ho
    Lee, Sang Won
    PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2011, VOL 2, 2011, : 387 - 392
  • [25] Whirling vibration of drilling shaft in minimal quantity lubrication deep hole drilling using theoretical and experimental investigation
    Kong, Lingfei
    Niu, Han
    Hou, Xiaoli
    Wang, Qingfeng
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2015, 229 (13) : 2433 - 2442
  • [26] Machining Parameters Optimization of Titanium Alloy using Response Surface Methodology and Particle Swarm Optimization under Minimum-Quantity Lubrication Environment
    Gupta, Munish Kumar
    Sood, P. K.
    Sharma, Vishal S.
    MATERIALS AND MANUFACTURING PROCESSES, 2016, 31 (13) : 1671 - 1682
  • [27] Optimization of Minimum Quantity Lubricant Conditions and Cutting Parameters in Hard Milling of AISI H13 Steel
    The-Vinh Do
    Hsu, Quang-Cherng
    APPLIED SCIENCES-BASEL, 2016, 6 (03):
  • [28] Improving Machining Performance for Deep Hole Drilling in the Electrical Discharge Machining Process Using a Step Cylindrical Electrode
    Jamkamon, Kamonpong
    Janmanee, Pichai
    APPLIED SCIENCES-BASEL, 2021, 11 (05): : 1 - 15
  • [29] Workpiece Thermal Distortion in Minimum Quantity Lubrication Deep Hole Drilling-Finite Element Modeling and Experimental Validation
    Tai, Bruce L.
    Jessop, Andrew J.
    Stephenson, David A.
    Shih, Albert J.
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2012, 134 (01):
  • [30] Optimization of Parameters and Sustainability Assessment Under Minimum Quantity Solid Lubrication-Assisted Machining of Inconel 718
    Makhesana, M. A.
    Patel, K. M.
    PROCESS INTEGRATION AND OPTIMIZATION FOR SUSTAINABILITY, 2021, 5 (03) : 625 - 644
12345