Spark Plasma Sintering Process of Fe-6.5%Si alloy from Fe and FeSi Powders

被引：1
|
作者：
Zhang Xiang [1 ]
Li Junguo [1 ]
Qi Qingqing [1 ]
Zhang Lianmeng [1 ]
机构：
[1] Wuhan Univ Technol, Wuhan 430070, Peoples R China
来源：
ADVANCED SYNTHESIS AND PROCESSING TECHNOLOGY FOR MATERIALS | 2009年 / 66卷
关键词：
Silicon steel; SPS; sintering process; MAGNETIC-PROPERTIES;
D O I：
10.4028/www.scientific.net/AMR.66.270
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Powder metallurgy (PM) method to fabricate 6.5% silicon steel attracts much attention due to the lower energy consumption and cost. In this paper, Fe-6 5%Si alloy was prepared by spark plasma sintering (SPS) from the mixture of Fe and Fe Si powders with different size The sintering process was investigated through the shrinkage behavior, phase change and microstructure The results show that the shrinkage starts from 500 degrees C, lower than conventional sintering methods The sintering temperature and Fe Si powder size influence the reaction between Fe and FeSi
引用
收藏
页码：270 / 272
页数：3
相关论文
共 50 条
  • [1] Rapidly solidified Fe-6.5%Si alloy powders for high frequency use
    Choi, SD
    Yang, CJ
    JOURNAL OF APPLIED PHYSICS, 1996, 79 (08) : 5489 - 5489
  • [2] Fe-6.5% Si/SiO2 powder cores prepared by spark plasma sintering: Magnetic properties and sintering mechanism
    Xu, Lili
    Yan, Biao
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2017, 31 (16-19):
  • [3] Evolution of Microstructure and Ordering in Rolling Process of Fe-6.5 mass% Si Alloy
    Li, Hui
    Liang, Yong-feng
    Ye, Feng
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016, 23 (05) : 453 - 458
  • [4] Fabrication of Fe-6.5wt%Si Bulk by Spark Plasma Sintering
    胡长征
    张东明
    JournalofWuhanUniversityofTechnology-MaterialsScience, 2005, (01) : 72 - 74
  • [5] Fabrication of Fe-6.5wt% Si bulk by spark plasma sintering
    Hu, CZ
    Zhang, DM
    Zhang, LM
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2005, 20 (01): : 72 - 74
  • [6] Fabrication of Fe-6.5wt% Si bulk by spark plasma sintering
    Hu Changzheng
    Zhang Dongming
    Zhang Lianmeng
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2005, 20 (1): : 72 - 74
  • [7] Corrosion behaviour of Fe-6.5 wt-%Si atomised powders
    Guo, Y. Y.
    Zhang, J.
    Li, K. F.
    Xia, W. B.
    Han, K.
    Song, C. J.
    Zhai, Q. J.
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2013, 48 (03) : 230 - 233
  • [8] OPTIMIZATION OF HEAT TREATMENT PROCESS OF Fe-6.5%Si SHEET
    Zhang Hao
    Li Hui
    Yang Kun
    Liang Yongfeng
    Ye Feng
    ACTA METALLURGICA SINICA, 2013, 49 (11) : 1445 - 1451
  • [9] Recrystallization behavior of warm rolled Fe-6.5%Si alloy sheet
    Mao, Wei-Min, 1643, University of Science and Technology Beijing (36):
  • [10] Effect of the ordering on the magnetic and magnetoimpedance properties of Fe-6.5% Si alloy
    Gómez-Polo, C
    Pérez-Landazába, JI
    Recarte, V
    Ciurzynska, W
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2003, 254 : 88 - 90
12345