Spark Plasma Sintering Process of Fe-6.5%Si alloy from Fe and FeSi Powders

被引：1
|
作者：
Zhang Xiang [1 ]
Li Junguo [1 ]
Qi Qingqing [1 ]
Zhang Lianmeng [1 ]
机构：
[1] Wuhan Univ Technol, Wuhan 430070, Peoples R China
来源：
ADVANCED SYNTHESIS AND PROCESSING TECHNOLOGY FOR MATERIALS | 2009年 / 66卷
关键词：
Silicon steel; SPS; sintering process; MAGNETIC-PROPERTIES;
D O I：
10.4028/www.scientific.net/AMR.66.270
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Powder metallurgy (PM) method to fabricate 6.5% silicon steel attracts much attention due to the lower energy consumption and cost. In this paper, Fe-6 5%Si alloy was prepared by spark plasma sintering (SPS) from the mixture of Fe and Fe Si powders with different size The sintering process was investigated through the shrinkage behavior, phase change and microstructure The results show that the shrinkage starts from 500 degrees C, lower than conventional sintering methods The sintering temperature and Fe Si powder size influence the reaction between Fe and FeSi
引用
收藏
页码：270 / 272
页数：3
相关论文
共 50 条
  • [31] Effect of chromium on microstructure, ordered phase and magnetic properties of Fe-6.5 wt% Si alloy
    Chen, Wensi
    Liu, Jing
    Cheng, Zhaoyang
    Lin, Xifeng
    Zhu, Jiachen
    MATERIALS TODAY-PROCEEDINGS, 2015, 2 : 314 - 318
  • [32] Magnetic properties of spray formed Fe-3%Si, Fe-5%Si and Fe-6.5%Si alloys
    Bolfarini, Claudemiro
    Gusson, Priscila Penteado
    Alves Silva, Mário Cézar
    Kiminami, Claudio Shyinti
    Materials Science Forum, 2003, 416-418 (01) : 113 - 118
  • [33] Core loss reduction in Fe-6.5 wt.%Si/SiO2 core-shell composites by ball milling coating and spark plasma sintering
    Wu, Zhaoyang
    Fan, Xi'an
    Wang, Jian
    Li, Guangqiang
    Gan, Zhanghua
    Zhang, Zhan
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 617 : 21 - 28
  • [34] Cold rolled Fe-6.5 wt. % Si alloy foils with high magnetic induction
    Fang, X. S.
    Liang, Y. F.
    Ye, F.
    Lin, J. P.
    JOURNAL OF APPLIED PHYSICS, 2012, 111 (09)
  • [35] Preparing High Silicon Steel by Sintering Fe-6.5%Si Powder Compacts in Static Magnetic Field
    TANG Nie-wei
    ZHONG Yun-bo
    SUN Zong-qian
    ZHENG Tian-xiang
    Journal of Iron and Steel Research(International), 2012, (S1) : 455 - 458
  • [36] Fe-6.5％Si快速凝固极薄带
    刘海明
    彭长平
    李玉国
    钢铁, 1993, (07) : 55 - 59
  • [37] Disordering induced work softening of Fe-6.5 wt%Si alloy during warm deformation
    Li, Hui
    Liang, Y. F.
    Yang, W.
    Ye, F.
    Lin, J. P.
    Xie, J. X.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 628 : 262 - 268
  • [38] Effect of Heat Treatment on Ordered Structures and Mechanical Properties of Fe-6.5 mass%Si Alloy
    Li, Hui
    Liang, Yong-Feng
    Ye, Feng
    MATERIALS TRANSACTIONS, 2015, 56 (05) : 759 - 765
  • [39] Microstructure, Ordered Structure and Warm Tensile Ductility of Fe-6.5% Si Alloy with Various Ce Content
    Yu Xuan
    Zhang Zhihao
    Xie Jianxin
    ACTA METALLURGICA SINICA, 2017, 53 (08) : 927 - 936
  • [40] Secondary recrystallization in Fe-6.5 wt% Si alloys by internal friction
    Lambri, OA
    Pérez-Landazábal, JI
    Salvatierra, LM
    Milani, LM
    Gómez-Polo, C
    Recarte, V
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2001, 287 (1-3) : 70 - 74
12345