Fabrication of Fe-6.5wt% Si bulk by spark plasma sintering

被引：0
|
作者：
Hu, CZ [1 ]
Zhang, DM [1 ]
Zhang, LM [1 ]
机构：
[1] Wuhan Univ Technol, State Key Lab Adv Technol Mat Synth & Proc, Wuhan 430070, Peoples R China
来源：
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION | 2005年 / 20卷 / 01期
关键词：
Fe-6.5wt% Si; spark plasma sintering; mechanical alloying; non-equilibrium;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fe-6.5 wt% Si composite compact was fabricated by spark plasma sintering SPS Mechanical alloying (AM) was used to prepare Fe-Si composite powders. The composite powders were sintered by SPS at elev-sated temperature from 500 degrees C to 700 degrees C. The experimental results indicate that the non-equilibrium state of composite Fe-Si is preserved in the compact. The density of the bulk rises with the increasing temperature and there is no diffusion of silicon and iron in the interface.
引用
收藏
页码：72 / 74
页数：3
相关论文
共 50 条
  • [1] Fabrication of Fe-6.5wt%Si Bulk by Spark Plasma Sintering
    胡长征
    张东明
    JournalofWuhanUniversityofTechnology-MaterialsScience, 2005, (01) : 72 - 74
  • [2] Fabrication of Fe-6.5wt% Si bulk by spark plasma sintering
    Hu Changzheng
    Zhang Dongming
    Zhang Lianmeng
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2005, 20 (1): : 72 - 74
  • [3] Formation of Fe-6.5wt%Si sheets by powder rolling and sintering
    Zhang, LM
    Yuan, WJ
    Shen, Q
    Zhang, DM
    HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2, 2005, 280-283 : 1713 - 1715
  • [4] Fabrication of Fe-6.5wt%Si Ribbons by Melt Spinning Method on Large Scale
    Liang, Y. F.
    Wang, S.
    Li, H.
    Jiang, Y. M.
    Ye, F.
    Lin, J. P.
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2015, 2015
  • [5] Microstructure and Properties of Fe-6.5wt%Si alloys cores with Core-shell Structures prepared by Mechanical Alloying and Spark Plasma Sintering methods
    Wu, Zhaoyang
    Li, Guangqiang
    Fan, Xi'an
    Xu, Yumeng
    Zhang, Zhan
    Wan, Xiangliang
    CHEMICAL, MATERIAL AND METALLURGICAL ENGINEERING III, PTS 1-3, 2014, 881-883 : 980 - 985
  • [6] Directional recrystallization and microstructures of an Fe-6.5wt%Si alloy
    Zhang Z.
    Chen G.
    Bei H.
    Li F.
    Ye F.
    Chen G.
    Liu C.-T.
    Journal of Materials Research, 2009, 24 (8) : 2654 - 2660
  • [7] Directional recrystallization and microstructures of an Fe-6.5wt%Si alloy
    Zhang, Zhongwu
    Chen, Guang
    Bei, Hongbin
    Li, Feng
    Ye, Feng
    Chen, Guoliang
    Liu, Chain-Tsuan
    JOURNAL OF MATERIALS RESEARCH, 2009, 24 (08) : 2654 - 2660
  • [8] Microstructure of Fe-6.5wt%Si composite powders prepared by mechanical alloying
    Zhang, LM
    Yuan, WJ
    Shen, Q
    Zhang, DM
    COMPOSITE MATERIALS III, 2003, 249 : 303 - 306
  • [9] The effect of directionally solidified microstructures on ductility of Fe-6.5wt%Si alloy
    Liang, Y. F.
    Zheng, Z. L.
    Lin, J. P.
    Ye, F.
    Chen, G. L.
    13TH INTERNATIONAL CONFERENCE ON RAPIDLY QUENCHED AND METASTABLE MATERIALS, 2009, 144
  • [10] Numerical modeling investigation of Planar Flow Casting for Fe-6.5wt%Si alloy
    Mao, Yi
    Xuan, Dongpo
    Jiang, Tianliang
    Zhou, You
    Fan, Wenhao
    Zhou, Cheng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 128 (11-12): : 5373 - 5383
12345