Micro-scale abrasive wear testing of Cr-Nx coatings

被引：0
|
作者：
Lakel, S. [1 ]
Almi, K. [1 ]
Berriche, Y.
机构：
[1] Univ Laghouat, Lab Fundamentals Sci, Laghouat, Algeria
来源：
ROMANIAN REPORTS IN PHYSICS | 2007年 / 59卷 / 01期
关键词：
abrasion wear resistance; ballcratering; CrNx; tribology;
D O I：
暂无
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
Information of the wear resistance proprieties of coatings is urgently required by suppliers and users to provide confidence in the performance of engineering coatings. The balcrattring test has been used to investigated the abrasive wear resistance of a series of thin (3.5-5.8 mu m) PVD coatings of CrNx (0.18 <= x <= 1) on identical a DIN 1.4301 steel substrates. Two different abrasives, SiC and diamond were used. The hardness of the films was found to be in the range of 8-40 GPa. The aim of this paper is to evaluate the abrasion resistance of hard coatings, and low abrasive wear resistance of these coatings are compared. The results obtained show an excellent correlation between coatings hardness and abrasive wear resistance. The results were compared to those of a chromium nitride reference coating. The results obtained show an excellent correlation between coating hardness and abrasion resistance.
引用
收藏
页码：113 / 120
页数：8
相关论文
共 50 条
  • [21] Study on the Influence Law of Micro-Scale Abrasive Wear on a Wind Turbine Brake Pad
    Zhang, Shengfang
    Jin, Lu
    Yin, Jian
    Sha, Zhihua
    Ma, Fujian
    Yang, Dapeng
    Liu, Yu
    PROCESSES, 2024, 12 (10)
  • [22] Micro-scale abrasive wear behaviour of HVOF sprayed and laser-remelted conventional and nanostructured WC-Co coatings
    Chen, H
    Xu, C
    Zhou, Q
    Hutchings, IM
    Shipway, PH
    Liu, J
    WEAR, 2005, 258 (1-4) : 333 - 338
  • [23] Nano- and Micro-Scale Impact Testing of Hard Coatings: A Review
    Beake, Ben D.
    COATINGS, 2022, 12 (06)
  • [24] Influence of plasma nitriding treatment on the micro-scale abrasive wear behavior of AISI 4140 steel
    Valdes, J.
    Solis, J.
    Mercado, R.
    Oseguera, J.
    Carreon, H.
    Aguilar, C.
    Medina, A.
    MATERIALS LETTERS, 2022, 324
  • [25] Wear Analysis of Discs and Balls on a Micro-Scale
    Pawlus, Pawel
    Dzierwa, Andrzej
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2018, 25 : 299 - 305
  • [26] Influence of austenitising temperature on micro-scale abrasive wear of Ni-modified ferritic stainless steel
    Labiapari, Wilian S.
    Teles, Vinicius C.
    Pagani, Vitor
    de Alcantara, Claudio M.
    Neto, Iwao Ishizaki
    Fialho, Rafael L.
    da Silva, Washington M.
    de Mello, Jose Daniel B.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2024,
  • [27] A review of micro-scale abrasion testing
    Gant, A. J.
    Gee, M. G.
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2011, 44 (07)
  • [28] Crack arrest testing at the micro-scale
    Snartland, Brage Dahl
    Alvaro, Antonio
    Osen, Vidar
    Thaulow, Christian
    ENGINEERING FRACTURE MECHANICS, 2018, 201 : 157 - 166
  • [29] WEAR BEHAVIOR OF NITI THIN FILM AT MICRO-SCALE
    Ng, K. L.
    Sun, Q. P.
    Tomozawa, M.
    Miyazak, S.
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2010, 24 (1-2): : 85 - 93
  • [30] A novel method to map and quantify wear on a micro-scale
    Gåhlin, R
    Jacobson, S
    WEAR, 1998, 222 (02) : 93 - 102
12345