Micro-scale abrasive wear testing of Cr-Nx coatings

被引：0
|
作者：
Lakel, S. [1 ]
Almi, K. [1 ]
Berriche, Y.
机构：
[1] Univ Laghouat, Lab Fundamentals Sci, Laghouat, Algeria
来源：
ROMANIAN REPORTS IN PHYSICS | 2007年 / 59卷 / 01期
关键词：
abrasion wear resistance; ballcratering; CrNx; tribology;
D O I：
暂无
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
Information of the wear resistance proprieties of coatings is urgently required by suppliers and users to provide confidence in the performance of engineering coatings. The balcrattring test has been used to investigated the abrasive wear resistance of a series of thin (3.5-5.8 mu m) PVD coatings of CrNx (0.18 <= x <= 1) on identical a DIN 1.4301 steel substrates. Two different abrasives, SiC and diamond were used. The hardness of the films was found to be in the range of 8-40 GPa. The aim of this paper is to evaluate the abrasion resistance of hard coatings, and low abrasive wear resistance of these coatings are compared. The results obtained show an excellent correlation between coatings hardness and abrasive wear resistance. The results were compared to those of a chromium nitride reference coating. The results obtained show an excellent correlation between coating hardness and abrasion resistance.
引用
收藏
页码：113 / 120
页数：8
相关论文
共 50 条
  • [41] Micro-scale abrasion testing of PVD TiN coatings on conventional and nonledeburitic high-speed steels
    Richter, J
    WEAR, 2004, 257 (3-4) : 304 - 310
  • [42] Abrasive wear testing of DLC coatings deposited on plane and cylindrical parts
    Michler, T
    Siebert, C
    SURFACE & COATINGS TECHNOLOGY, 2003, 163 : 546 - 551
  • [43] Can scratch testing be used as a model for the abrasive wear of hard coatings?
    Bull, SJ
    WEAR, 1999, 233 : 412 - 423
  • [44] Micro-abrasive wear of PVD duplex and single-layered coatings
    Batista, JCA
    Matthews, A
    Godoy, C
    SURFACE & COATINGS TECHNOLOGY, 2001, 142 : 1137 - 1143
  • [45] A mechanical model for particle motion in the micro-scale abrasion wear test
    Shipway, PH
    WEAR, 2004, 257 (9-10) : 984 - 991
  • [46] Friction coefficient and wear mode transition in micro-scale abrasion tests
    Cozza, R. C.
    Tanaka, D. K.
    Souza, R. M.
    TRIBOLOGY INTERNATIONAL, 2011, 44 (12) : 1878 - 1889
  • [47] The effects of ball surface condition in the micro‐scale abrasive wear test
    D.N. Allsopp
    R.I. Trezona
    I.M. Hutchings
    Tribology Letters, 1998, 5 : 259 - 264
  • [48] EXPERIMENTAL TESTING OF MICRO-SCALE SELF ASSEMBLY PROCESS MODEL
    Carballo, Jose M.
    Hollis, Sean
    Crane, Nathan
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2011, VOL 11, 2012, : 337 - 343
  • [49] Diamond coatings for micro end mills: Enabling the dry machining of aluminum at the micro-scale
    Heaney, Patrick J.
    Sumant, Anirudha V.
    Torres, Christopher D.
    Carpick, Robert W.
    Pfefferkorn, Frank E.
    DIAMOND AND RELATED MATERIALS, 2008, 17 (03) : 223 - 233
  • [50] Micro-scale testing of capillary bridge evolution due to evaporation
    Mielniczuk, Boleslaw
    Hueckel, Tomasz
    El Youssoufi, Moulay Said
    Springer Series in Geomechanics and Geoengineering, 2013, 3 : 233 - 238
12345