Wear Analysis of Discs and Balls on a Micro-Scale

被引：4

作者：

Pawlus, Pawel ^{[1
]}

Dzierwa, Andrzej ^{[1
]}

机构：

[1] Rzeszow Univ Technol, Fac Mech Engn & Astronaut, Powstancow Warszawy 8 Av, PL-35959 Rzeszow, Poland

来源：

TEHNICKI VJESNIK-TECHNICAL GAZETTE | 2018年 / 25卷

关键词：

ball; disc; surface topography; wear; SURFACE-TOPOGRAPHY; RELOCATION;

D O I：

10.17559/TV-20160530222544

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Surface topographies of discs and balls after wear process were analysed. Discs were made from 42CrMo4 steel with hardness of 42 HRC, but balls from 100Cr6 steel of hardness 64 HRC. They were measured using white light interferometer Talysurf CCI Lite. Procedures for minimizing errors of wear loss determination were discussed. They can be applied thanks to software TalyMap. It was found that application of wear analysis of discs and balls on a micro scale allowed us precise determination of their wear after tribological tests, however this analysis should be careful, particularly for surfaces of high roughness.

引用

页码：299 / 305

页数：7

共 50 条

[1] Micro-scale Abrasive Wear of Soft Materials
Chen, Ping
Wan, Jing
Chen, Hue
ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3, 2011, 314-316 : 1330 - 1334
[2] WEAR BEHAVIOR OF NITI THIN FILM AT MICRO-SCALE
Ng, K. L.
Sun, Q. P.
Tomozawa, M.
Miyazak, S.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2010, 24 (1-2): : 85 - 93
[3] A novel method to map and quantify wear on a micro-scale
Gåhlin, R
Jacobson, S
WEAR, 1998, 222 (02) : 93 - 102
[4] Development of measuring technique for micro-scale wear performance
Chen, Ping
Chen, Hua-Hui
Li, Guo-Hua
Ning, Hua-Rong
Jinshu Rechuli/Heat Treatment of Metals, 2007, 32 (11): : 69 - 73
[5] Theory and application of a micro-scale abrasive wear test
Rutherford, KL
Hutchings, IM
JOURNAL OF TESTING AND EVALUATION, 1997, 25 (02) : 250 - 260
[6] Micro-scale abrasive wear of some sealing elastomers
Israel Farfan-Cabrera, Leonardo
Alberto Gallardo-Hernandez, Ezequiel
Sedano de la Rosa, Cesar
Vite-Torres, Manuel
WEAR, 2017, 376 : 1347 - 1355
[7] Wear-mode mapping for the micro-scale abrasion test
Adachi, K
Hutchings, IM
WEAR, 2003, 255 : 23 - 29
[8] Nano- and micro-scale wear of fluorinated carbon films
Ayala, P
da Costa, MEHM
Prioli, R
Freire, FL
SURFACE & COATINGS TECHNOLOGY, 2004, 182 (2-3): : 335 - 341
[9] Analysis of micro-scale EDM process
Katz, Z
Tibbles, CJ
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2005, 25 (9-10): : 923 - 928
[10] Analysis of strong scattering at the micro-scale
van Wijk, K
Komatitsch, D
Scales, JA
Tromp, J
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 2004, 115 (03): : 1006 - 1011

← 1 2 3 4 5 →