Wear Analysis of Discs and Balls on a Micro-Scale

被引：4
|
作者：
Pawlus, Pawel [1 ]
Dzierwa, Andrzej [1 ]
机构：
[1] Rzeszow Univ Technol, Fac Mech Engn & Astronaut, Powstancow Warszawy 8 Av, PL-35959 Rzeszow, Poland
来源：
TEHNICKI VJESNIK-TECHNICAL GAZETTE | 2018年 / 25卷
关键词：
ball; disc; surface topography; wear; SURFACE-TOPOGRAPHY; RELOCATION;
D O I：
10.17559/TV-20160530222544
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Surface topographies of discs and balls after wear process were analysed. Discs were made from 42CrMo4 steel with hardness of 42 HRC, but balls from 100Cr6 steel of hardness 64 HRC. They were measured using white light interferometer Talysurf CCI Lite. Procedures for minimizing errors of wear loss determination were discussed. They can be applied thanks to software TalyMap. It was found that application of wear analysis of discs and balls on a micro scale allowed us precise determination of their wear after tribological tests, however this analysis should be careful, particularly for surfaces of high roughness.
引用
收藏
页码：299 / 305
页数：7
相关论文
共 50 条
  • [21] An Analysis of Micro-scale Conflict in Collaborative Governance
    Ulibarri, Nicola
    JOURNAL OF PUBLIC ADMINISTRATION RESEARCH AND THEORY, 2023, : 316 - 330
  • [22] The micro-scale analysis of the micro direct methanol fuel cell
    Yuan, Zhenyu
    Yang, Jie
    Li, Xiaoyang
    Wang, Shikai
    ENERGY, 2016, 100 : 10 - 17
  • [23] Separations on the micro-scale
    Evans, Jon
    CHEMISTRY & INDUSTRY, 2011, (05) : 24 - 26
  • [24] Solidification at the micro-scale
    Howe, A
    STEEL RESEARCH INTERNATIONAL, 2003, 74 (07): : 418 - 422
  • [25] Effect of abrasive particle size distribution on the wear rate and wear mode in micro-scale abrasive wear tests
    Gomez, Victor A. O.
    de Macedo, Marcelo C. S.
    Souza, Roberto M.
    Scandian, Cherlio
    WEAR, 2015, 328 : 563 - 568
  • [26] A Stress-State-Dependent Sliding Wear Model for Micro-Scale Contacts
    Choudhry J.
    Almqvist A.
    Prakash B.
    Larsson R.
    Journal of Tribology, 2023, 145 (11)
  • [27] Wear evaluation of journal bearings using an adapted micro-scale abrasion tester
    Israel Farfan-Cabrera, Leonardo
    Alberto Gallardo-Hernandez, Ezequiel
    WEAR, 2017, 376 : 1841 - 1848
  • [28] Preliminary study of micro-scale abrasive wear of a NiTi shape memory alloy
    Imbeni, V
    Martini, C
    Prandstraller, D
    Poli, A
    Trepanier, C
    Duerig, TW
    WEAR, 2003, 254 (12) : 1299 - 1306
  • [29] Energy analysis of a micro-scale biomass cogeneration system
    Zoladek, Maciej
    Figaj, Rafal
    Sornek, Krzysztof
    ENERGY CONVERSION AND MANAGEMENT, 2021, 236
  • [30] The dynamic analysis of micro-scale edge in the process of micromilling
    Gong, Yadong
    Zhang, Jinfeng
    Cheng, Jun
    Wen, Xuelong
    Wang, Chao
    Yin, Guoqiang
    ADVANCES IN ABRASIVE TECHNOLOGY XVI, 2013, 797 : 628 - 637
12345