Reactive Ion Etching Parameter Effect on Aluminum Bond Pad Surface Morphology

被引：0

作者：

Palianysamy, Moganraj ^{[1
]}

Sauli, Zaliman ^{[1
]}

Hashim, Uda ^{[2
]}

Retnasamy, Vithyacharan ^{[1
]}

Taniselass, Steven ^{[1
]}

Ayub, Ramzan Mat ^{[2
]}

机构：

[1] Univ Malaysia Perlis, Sch Microelect Engn, Kampus Pauh Putra, Arau 02600, Perlis, Malaysia

[2] Univ Malaysia Perlis, Inst Nano Elect Engn INEE, Seriab Kangar 01000, Perlis, Malaysia

来源：

MICRO/NANO SCIENCE AND ENGINEERING | 2014年 / 925卷

关键词：

RIE; DOE; DESIGNED EXPERIMENTS;

D O I：

10.4028/www.scientific.net/AMR.925.84

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Reactive Ion Etching (RIE) is an important process in fabrication of semiconductor devices. Design Of Experiment(DOE) has been used to study the effect of Reactive Ion Etch(RIE) towards surface morphology of aluminum bond pad. Important RIE factors involved in this experimental study are ratio of Tetrafluoromethane (CF4), Argon gas flow, BIAS, and ICP power. Different combinations of these factors produces different results of surface morphologies which was obtained using Atomic Force Microscopic(AFM). Produced results shows that overall surface roughness of the pad is affected by RIE and DOE offers a better way to optimize the desired outcome.

引用

页码：84 / +

页数：2

共 50 条

[1] Reactive Ion Etching Parameter Effect on Aluminum Bond Pad Surface Morphology
Palianysamy, Moganraj
Sauli, Zaliman
Hashim, Uda
Retnasamy, Vithyacharan
Taniselass, Steven
Ayub, Ramzan Mat
MICRO/NANO SCIENCE AND ENGINEERING, 2014, 925 : 140 - +
[2] Change in surface morphology of polytetrafluoroethylene by reactive ion etching
Takahashi, Tomohiro
Hirano, Yuki
Takasawa, Yuya
Gowa, Tomoko
Fukutake, Naoyuki
Oshima, Akihiro
Tagawa, Seiichi
Washio, Masakazu
RADIATION PHYSICS AND CHEMISTRY, 2011, 80 (02) : 253 - 256
[3] Effect of reactive ion etching on the surface of polymethylmethacrylate
Mironova A.A.
Popov A.M.
Zanaveskin M.L.
Journal of Surface Investigation, 2015, 9 (03): : 457 - 461
[4] REACTIVE ION ETCHING OF ALUMINUM SILICON
LIGHT, RW
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1983, 130 (11) : 2225 - 2230
[5] Research of Reactive Ion and Plasma-Chemical Etching Effect on Diamond Coating Surface Morphology
Okhotnikov, Vitaly
Linnik, Stepan
Gaydaychuk, Alexander
PROSPECTS OF FUNDAMENTAL SCIENCES DEVELOPMENT (PFSD-2016), 2016, 1772
[6] Surface Morphology of Silicon Waveguide after Reactive Ion Etching (RIE)
Zheng, Yu
Gao, Piaopiao
Jiang, Lianqiong
Kai, Xiaochao
Duan, Ji'an
COATINGS, 2019, 9 (08)
[7] Polymer surface morphology control by reactive ion etching for microfluidic devices
Nabesawa, Hirofumi
Hitobo, Takeshi
Wakabayashi, Suguru
Asaji, Toyohisa
Abe, Takashi
Seki, Minoru
SENSORS AND ACTUATORS B-CHEMICAL, 2008, 132 (02) : 637 - 643
[8] Mechanism of reactive ion etching lag for aluminum alloy etching
Sato, Tetsuo, 1600, JJAP, Minato-ku, Japan (34):
[9] Effect of N2 addition on aluminum alloy etching by electron cyclotron resonance reactive ion etching and magnetically enhanced reactive ion etching
Kusumi, Yoshihiro
Fujiwara, Nobuo
Matsumoto, Junko
Yoneda, Masahiro
Japanese Journal of Applied Physics, Part 1: Regular Papers & Short Notes & Review Papers, 1995, 34 (4 B): : 2147 - 2151
[10] ENDPOINT DETECTION FOR REACTIVE ION ETCHING OF ALUMINUM
PARK, KO
ROCK, FC
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1984, 131 (01) : 214 - 215

← 1 2 3 4 5 →