Stable high-nickel austenitic steel produced by electron beam additive manufacturing using dual wire-feed system

被引：7
|
作者：
Moskvina, V. A. [1 ]
Melnikov, E. V. [1 ]
Astafurov, S. V. [1 ]
Panchenko, M. Yu. [1 ]
Reunova, K. A. [1 ]
Kolubaev, E. A. [1 ]
Astafurova, E. G. [1 ]
机构：
[1] RAS, Inst Strength Phys & Mat Sci SB, 2-4 Akad Skii Ave, Tomsk 634055, Russia
来源：
MATERIALS LETTERS | 2021年 / 305卷
关键词：
Stainless steel; NiCr alloy; Additive manufacturing; Austenite; Microstructure; STAINLESS-STEELS;
D O I：
10.1016/j.matlet.2021.130863
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Phase composition, microstructure, tensile properties and fracture mechanism of the high-nickel austenitic steel produced by a dual wire-feed electron beam additive manufacturing were studied. The joint using of NiCr-alloy and 321-type stainless steel wires in additive manufacturing process assists the formation a fully austenitic structure in as-built billet. Its microstructure is stable against deformation-induced gamma -* alpha' martensitic transformation due to the 5-7 wt.% increase of nickel concentration relative to the initial steel wire composition. The high-nickel steel possesses high ductility (6 approximate to 54%) and plastic flow behavior similar to the conventional cast 321-type steel subjected to a solid-solution treatment.
引用
收藏
页数：4
相关论文
共 50 条
  • [41] The Effect of Interface Orientation During Uniaxial Tension of Functionally Gradient Materials of a Stainless Steel-Copper System Formed by the Wire-Feed Electron Beam Additive Manufacturing
    Osipovich, K. S.
    Chumaevskii, A. V.
    Moskvichev, E. N.
    Kolubaev, E. A.
    RUSSIAN PHYSICS JOURNAL, 2023, 66 (10) : 1039 - 1045
  • [42] Comparative Analysis of Weld Microstructure in Ti-6Al-4V Samples Produced by Rolling and Wire-Feed Electron Beam Additive Manufacturing
    A. V. Panin
    M. S. Kazachenok
    K. V. Krukovsky
    L. A. Kazantseva
    S. A. Martynov
    Physical Mesomechanics, 2023, 26 : 643 - 655
  • [43] The Effect of Interface Orientation During Uniaxial Tension of Functionally Gradient Materials of a Stainless Steel-Copper System Formed by the Wire-Feed Electron Beam Additive Manufacturing
    K. S. Osipovich
    A. V. Chumaevskii
    E. N. Moskvichev
    E. A. Kolubaev
    Russian Physics Journal, 2023, 66 : 1039 - 1045
  • [44] Residual stress and deformation in wire-feed electron beam additive manufactured aluminum components
    Dongqi Zhang
    Dong Du
    Shuai Xue
    Junjie Qi
    Ze Pu
    Yunpeng Lu
    Yingying Tang
    Baohua Chang
    The International Journal of Advanced Manufacturing Technology, 2024, 131 : 1665 - 1676
  • [45] Al-Al3Ni In Situ Composite Formation by Wire-Feed Electron-Beam Additive Manufacturing
    Dobrovolskii, Artem
    Chumaevskii, Andrey
    Zykova, Anna
    Savchenko, Nikolay
    Gurianov, Denis
    Nikolaeva, Aleksandra
    Semenchuk, Natalia
    Nikonov, Sergey
    Sokolov, Pavel
    Rubtsov, Valery
    Kolubaev, Evgeny
    MATERIALS, 2023, 16 (11)
  • [46] Regularities of Friction Stir Processing Hardening of Aluminum Alloy Products Made by Wire-Feed Electron Beam Additive Manufacturing
    Kalashnikova, Tatiana
    Chumaevskii, Andrey
    Kalashnikov, Kirill
    Knyazhev, Evgeny
    Gurianov, Denis
    Panfilov, Alexander
    Nikonov, Sergey
    Rubtsov, Valery
    Kolubaev, Evgeny
    METALS, 2022, 12 (02)
  • [47] Microstructure and Mechanical Properties of TC11 Titanium Alloy Fabricated by Wire-feed Electron Beam Additive Manufacturing
    Zhang, Guodong
    Zhang, Peng
    Gao, Jianshi
    Yu, Huai
    Yuan, Hong
    Ding, Ning
    Xiong, Huaping
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2023, 59 (04): : 105 - 112
  • [48] Residual stress and deformation in wire-feed electron beam additive manufactured aluminum components
    Zhang, Dongqi
    Du, Dong
    Xue, Shuai
    Qi, Junjie
    Pu, Ze
    Lu, Yunpeng
    Tang, Yingying
    Chang, Baohua
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 131 (3-4): : 1665 - 1676
  • [49] Development of a cold wire-feed additive layer manufacturing system using shaped metal deposition method
    Oguzhan Yilmaz
    Adnan A. Ugla
    Journal of Mechanical Science and Technology, 2017, 31 : 1611 - 1620
  • [50] Characterizing the Tensile Behavior of Double Wire-Feed Electron Beam Additive Manufactured "Copper-Steel" Using Digital Image Correlation
    Kibitkin, Vladimir
    Vorontsov, Andrey
    Osipovich, Kseniya
    Shamarin, Nikolay
    Chumaevskii, Andrey
    Rubtsov, Valery
    Moskvichev, Evgeny
    Savchenko, Nickolai
    Kolubaev, Evgeny
    METALS, 2022, 12 (11)
12345