Stable high-nickel austenitic steel produced by electron beam additive manufacturing using dual wire-feed system

被引：7
|
作者：
Moskvina, V. A. [1 ]
Melnikov, E. V. [1 ]
Astafurov, S. V. [1 ]
Panchenko, M. Yu. [1 ]
Reunova, K. A. [1 ]
Kolubaev, E. A. [1 ]
Astafurova, E. G. [1 ]
机构：
[1] RAS, Inst Strength Phys & Mat Sci SB, 2-4 Akad Skii Ave, Tomsk 634055, Russia
来源：
MATERIALS LETTERS | 2021年 / 305卷
关键词：
Stainless steel; NiCr alloy; Additive manufacturing; Austenite; Microstructure; STAINLESS-STEELS;
D O I：
10.1016/j.matlet.2021.130863
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Phase composition, microstructure, tensile properties and fracture mechanism of the high-nickel austenitic steel produced by a dual wire-feed electron beam additive manufacturing were studied. The joint using of NiCr-alloy and 321-type stainless steel wires in additive manufacturing process assists the formation a fully austenitic structure in as-built billet. Its microstructure is stable against deformation-induced gamma -* alpha' martensitic transformation due to the 5-7 wt.% increase of nickel concentration relative to the initial steel wire composition. The high-nickel steel possesses high ductility (6 approximate to 54%) and plastic flow behavior similar to the conventional cast 321-type steel subjected to a solid-solution treatment.
引用
收藏
页数：4
相关论文
共 50 条
  • [31] Process planning for laser wire-feed metal additive manufacturing system
    Yaoyu Ding
    Meysam Akbari
    Radovan Kovacevic
    The International Journal of Advanced Manufacturing Technology, 2018, 95 : 355 - 365
  • [32] The Regularities of Metal Transfer by a Nickel-Based Superalloy Tool during Friction Stir Processing of a Titanium Alloy Produced by Wire-Feed Electron Beam Additive Manufacturing
    Rubtsov, Valery
    Chumaevskii, Andrey
    Knyazhev, Evgeny
    Utyaganova, Veronika
    Gurianov, Denis
    Amirov, Alihan
    Cheremnov, Andrey
    Kolubaev, Evgeny
    METALS, 2024, 14 (01)
  • [33] Effect of Annealing on the Microstructure, Phase Composition and Microhardness of the Ni-Ti Alloy Produced by Wire-Feed Electron-Beam Additive Manufacturing
    Astafurova, E. G.
    Luchin, A. V.
    Nifontov, A. S.
    Gurtova, D. Yu.
    Astafurov, S. V.
    Kolubaev, E. A.
    RUSSIAN PHYSICS JOURNAL, 2024, 67 (08) : 1164 - 1171
  • [34] Features of the structural-phase state of thin-walled samples produced by electron beam wire-feed additive manufacturing on a titanium substrate
    Zhapova, D. Yu
    Krukovskii, K. V.
    Martynov, S. A.
    Gusarenko, A. A.
    RUSSIAN PHYSICS JOURNAL, 2024, 67 (11) : 2088 - 2092
  • [35] Heat Input Effect on the Structure of ZhS6U Alloy Products Produced by Wire-Feed Electron-Beam Additive Manufacturing
    Gurianov, D. A.
    Fortuna, S. V.
    Nikonov, S. Yu.
    Moskvichev, E. N.
    Kolubaev, E. A.
    RUSSIAN PHYSICS JOURNAL, 2021, 64 (08) : 1415 - 1421
  • [36] Heat Input Effect on the Structure of ZhS6U Alloy Products Produced by Wire-Feed Electron-Beam Additive Manufacturing
    D. A. Gurianov
    S. V. Fortuna
    S. Yu. Nikonov
    E. N. Moskvichev
    E. A. Kolubaev
    Russian Physics Journal, 2021, 64 : 1415 - 1421
  • [37] Stabilization of austenitic structure in transition zone of "austenitic stainless steel/NiCr alloy" joint fabricated by wire-feed electron beam melting
    Moskvina, V. A.
    Melnikov, E., V
    Panchenko, M. Yu
    Maier, G. G.
    Reunova, K. A.
    Astafurov, S., V
    Kolubaev, E. A.
    Astafurova, E. G.
    MATERIALS LETTERS, 2020, 277 (277)
  • [38] MECHANICAL PROPERTIES OF STEEL-COPPER POLYMETAL MANUFACTURED BY THE WIRE-FEED ELECTRON-BEAM ADDITIVE TECHNOLOGY
    Osipovich, K. S.
    Chumaevskii, A. V.
    Gusarova, A., V
    Kalashnikov, K. N.
    Kolubaev, E. A.
    HIGH TEMPERATURE MATERIAL PROCESSES, 2020, 24 (02): : 91 - 98
  • [39] Wire Feed Electron Beam Additive Manufacturing of Metallic Components
    Fortuna, S. V.
    Filippov, A. V.
    Kolubaev, E. A.
    Fortuna, A. S.
    Gurianov, D. A.
    PROCEEDINGS OF THE ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES, 2018, 2051
  • [40] Comparative Analysis of Weld Microstructure in Ti-6Al-4V Samples Produced by Rolling and Wire-Feed Electron Beam Additive Manufacturing
    Panin, A. V.
    Kazachenok, M. S.
    Krukovsky, K. V.
    Kazantseva, L. A.
    Martynov, S. A.
    PHYSICAL MESOMECHANICS, 2023, 26 (06) : 643 - 655
12345