A BIM-Based Quality Inspection System Prototype for Temporary Construction Works

被引:4
|
作者
Choi, Chang Hoon [1 ]
Lee, Junbok [2 ]
机构
[1] Junglim Architecture, CM Lab, Seoul 04526, South Korea
[2] Kyung Hee Univ, Coll Engn, Dept Architectural Engn, Yongin 17104, South Korea
基金
新加坡国家研究基金会;
关键词
BIM; quality inspection; temporary construction works;
D O I
10.3390/buildings12111931
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In the construction project, the temporary work is the construction work, which is installed temporarily for the construction of main structure and removed after its completion. Even though it is a temporary facility used and demolished only during the construction phase, it accounts for about 10% of the total construction cost. In addition, it is an important work directly connected to the cost and quality of construction, so that the completeness of the building depends on the technology of the temporary work. Therefore, it is necessary to manage it through systematic quality inspection activities. In order to perform a systematic quality inspection, it is essential that detailed and specific inspection activities, such as inspecting the conformity of the design and construction and its compliance with relevant standards based on construction inspection information, such as drawings, specifications, and checklists, are carried out. However, most of the construction inspection information about the temporary work does not include any specific information in documents (drawings, specifications, etc.). Additionally, the direct temporary work among the temporary works is treated as an auxiliary work of the main structure work in the construction site, although it is the construction work based on the work breakdown structure. Accordingly, the quality control engineer must manually check only the contents of the temporary work among the construction inspection information that covers the overall construction work. Additionally, the probability of human error is increased, as the quality control engineer manually carries out the quality inspection tasks, such as preparing the inspection-related materials and checklist and writing the inspection result report. This leads to inefficiency and problems such as re-provisioning for inspection and re-inspection. Therefore, it is necessary to construct a business process that can efficiently carry out the quality inspection work by complementing and improving the above problems involving the temporary work, which is performed most inefficiently. In this study, a BIM-based quality inspection system prototype for temporary works was developed that can automate tasks and systematically store and manage various types of inspection information for each of the temporary facilities in order to improve the efficiency of the quality inspection carried out by the quality control engineer. As a result, a process designed to improve the quality inspection of the temporary work, which can perform the quality inspection work, is proposed. Additionally, the quality of the works related to quality control is improved through improvements in the accuracy and efficiency of the works and simplification of the existing manual work procedures through the proposed business improvement process.
引用
收藏
页数:26
相关论文
共 50 条
  • [21] Preliminary study for performance analysis of BIM-based building construction simulation system
    Seok-heon Yun
    Ki-hyun Jun
    Chang-baek Son
    Sang-chul Kim
    KSCE Journal of Civil Engineering, 2014, 18 : 531 - 540
  • [22] A BIM-based tool for embodied carbon assessment using a Construction Classification System
    Parece, Sara
    Resende, Ricardo
    Rato, Vasco
    DEVELOPMENTS IN THE BUILT ENVIRONMENT, 2024, 19
  • [23] BIM-based digital platform and risk management system for mountain tunnel construction
    Liu, Naifei
    Guo, Desai
    Song, Zhanping
    Zhong, Shiming
    Hu, Ruoqi
    SCIENTIFIC REPORTS, 2023, 13 (01)
  • [24] Development of a BIM-based structural framework optimization and simulation system for building construction
    Song, Sungyol
    Yang, Jeongsam
    Kim, Namhyuk
    COMPUTERS IN INDUSTRY, 2012, 63 (09) : 895 - 912
  • [25] A BIM-based development method for digital drawing review system in the construction sector
    Xie, Qimiao
    Jiang, Yufei
    Huang, Chen
    JOURNAL OF ASIAN ARCHITECTURE AND BUILDING ENGINEERING, 2024, 23 (06) : 1916 - 1932
  • [26] BIM-based digital platform and risk management system for mountain tunnel construction
    Naifei Liu
    Desai Guo
    Zhanping Song
    Shiming Zhong
    Ruoqi Hu
    Scientific Reports, 13
  • [27] Preliminary study for performance analysis of BIM-based building construction simulation system
    Yun, Seok-heon
    Jun, Ki-hyun
    Son, Chang-baek
    Kim, Sang-chul
    KSCE JOURNAL OF CIVIL ENGINEERING, 2014, 18 (02) : 531 - 540
  • [28] BIM-based Last Planner System tool for improving construction project management
    Heigermoser, Daniel
    de Soto, Borja Garcia
    Abbott, Ernest Leslie Sidney
    Chua, David Kim Huat
    AUTOMATION IN CONSTRUCTION, 2019, 104 : 246 - 254
  • [29] An algorithm for automatic generation of construction quality inspection points based on BIM
    Ma Z.
    Mao N.
    Tongji Daxue Xuebao/Journal of Tongji University, 2016, 44 (05): : 725 - 729
  • [30] BIM-based Localization and Mapping for Mobile Robots in Construction
    Moura, Mateus Sanches
    Rizzo, Carlos
    Serrano, Daniel
    2021 IEEE INTERNATIONAL CONFERENCE ON AUTONOMOUS ROBOT SYSTEMS AND COMPETITIONS (ICARSC), 2021, : 12 - 18