Signal extraction of micromachined gyroscope based on the chaotic dynamics

被引：0
|
作者：
Sun, DH [1 ]
Wang, LY [1 ]
Huang, WC [1 ]
机构：
[1] Xiamen Univ, Xiamen, Peoples R China
来源：
PROCEEDINGS OF THE 3RD CHINA-JAPAN SYMPOSIUM ON MECHATRONICS | 2002年
关键词：
micromachined gyroscope; chaotic dynamics; weak signal;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Signal extraction is one of the key problems in micromachined gyroscope's design and manufacture. The sensed signal is rather weak because of the reduced structure size, and it is submerged in the strong noise-ground. Some chaotic systems are with the properties of high sensitivity to the signal with fixed frequency. In the article, the signal processing principle using chaotic dynamics is described, and in order to determine the transition point from chaotic state to periodic, a Duffing system is analyzed by using the numerical method of 4th Rounge-Kutta. The noised signal, in which the noise amplitude is 10(4) times of the detected signal, is as the input of the chaotic system, but the weak signal still can be detected. The signal with other frequency closed to the above mentioned is investigated, it's shown that the system is with the immunity to other frequency. it can be seen from the experiment that the detected signal is well agree with the expected.
引用
收藏
页码：347 / 350
页数：4
相关论文
共 50 条
  • [41] Si Micromachined Gyroscope Driven by the Rotating Carrier
    Zhang Fuxue
    Engineering Sciences, 2007, (02) : 148 - 152
  • [42] An Interface for Low-Q Micromachined Gyroscope
    Wang Guanshi
    Mu Tao
    Liu Xiaowei
    MICRO-NANO TECHNOLOGY XIII, 2012, 503 : 128 - 133
  • [43] Simulation of vibratory micromachined gyroscope with fence structure
    Che, LF
    Xiong, B
    Huang, XZ
    Wang, YL
    INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION, 2002, 3 (3-4) : 333 - 336
  • [44] Design of a novel micromachined gyroscope with compensatory capacitance
    Chen, Weiping
    Chen, Hong
    Han, Tian
    Liu, Xiaowei
    Wang, Hongyu
    PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 2778 - 2781
  • [45] Micromachined rotating gyroscope with electromagnetically levitated rotor
    Wu, X-S.
    Chen, W-Y.
    Zhao, X. -L.
    Zhang, W-P.
    ELECTRONICS LETTERS, 2006, 42 (16) : 912 - 913
  • [46] Design of data acquisition system for micromachined silicon resonant gyroscope based on FPGA
    Sheng, Ping
    Wang, Shou-Rong
    Yang, Bo
    Nami Jishu yu Jingmi Gongcheng/Nanotechnology and Precision Engineering, 2011, 9 (03): : 203 - 206
  • [47] The Analysis of Periodic Signal Detection Method Based on Duffing System Chaotic Dynamics
    Martynyuk, V. V.
    Havrylko, Ye. V.
    Boiko, J. M.
    Fedula, M. V.
    VISNYK NTUU KPI SERIIA-RADIOTEKHNIKA RADIOAPARATOBUDUVANNIA, 2018, (74): : 5 - 10
  • [48] Structure Optimization of Piezoelectric Micromachined Modal Gyroscope
    Hu, Xiaojun
    Wu, Xiaosheng
    Wang, Zheng
    Chen, Wenyuan
    Zhang, Weiping
    MECHANICAL AND ELECTRONICS ENGINEERING III, PTS 1-5, 2012, 130-134 : 3377 - 3380
  • [49] Analysis of the interface circuit of silicon micromachined gyroscope
    Southeast University, Nanjing 210096, China
    Yi Qi Yi Biao Xue Bao, 2006, 7 (754-758):
  • [50] A doubly decoupled lateral axis micromachined gyroscope
    Liu, X. S.
    Yang, Z. C.
    Chi, X. Z.
    Cui, J.
    Ding, H. T.
    Guo, Z. Y.
    Lv, B.
    Lin, L. T.
    Zhao, Q. C.
    Yan, G. Z.
    SENSORS AND ACTUATORS A-PHYSICAL, 2009, 154 (02) : 218 - 223
12345