Signal extraction of micromachined gyroscope based on the chaotic dynamics

被引：0
|
作者：
Sun, DH [1 ]
Wang, LY [1 ]
Huang, WC [1 ]
机构：
[1] Xiamen Univ, Xiamen, Peoples R China
来源：
PROCEEDINGS OF THE 3RD CHINA-JAPAN SYMPOSIUM ON MECHATRONICS | 2002年
关键词：
micromachined gyroscope; chaotic dynamics; weak signal;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Signal extraction is one of the key problems in micromachined gyroscope's design and manufacture. The sensed signal is rather weak because of the reduced structure size, and it is submerged in the strong noise-ground. Some chaotic systems are with the properties of high sensitivity to the signal with fixed frequency. In the article, the signal processing principle using chaotic dynamics is described, and in order to determine the transition point from chaotic state to periodic, a Duffing system is analyzed by using the numerical method of 4th Rounge-Kutta. The noised signal, in which the noise amplitude is 10(4) times of the detected signal, is as the input of the chaotic system, but the weak signal still can be detected. The signal with other frequency closed to the above mentioned is investigated, it's shown that the system is with the immunity to other frequency. it can be seen from the experiment that the detected signal is well agree with the expected.
引用
收藏
页码：347 / 350
页数：4
相关论文
共 50 条
  • [21] Two-dimensional micromachined gyroscope
    Fujita, T
    Mizuno, T
    Kenny, R
    Maenaka, K
    Maeda, M
    TRANSDUCERS 97 - 1997 INTERNATIONAL CONFERENCE ON SOLID-STATE SENSORS AND ACTUATORS, DIGEST OF TECHNICAL PAPERS, VOLS 1 AND 2, 1997, : 887 - 890
  • [22] Conditioning circuit of capacitive micromachined gyroscope
    School of Instrument Science and Technology, Southeast University, Nanjing 210096, China
    Yi Qi Yi Biao Xue Bao, 2007, 12 (2210-2213): : 2210 - 2213
  • [23] Vacuum packaged silicon micromachined gyroscope
    Department of Instrument Science and Technology, Southeast University, Nanjing 210096, China
    Dongnan Daxue Xuebao, 2006, 5 (736-740):
  • [24] A silicon micromachined tuning fork gyroscope
    Paoletti, F
    Gretillat, MA
    deRooij, NF
    SYMPOSIUM - GYRO TECHNOLOGY 1996, 1996, : E0 - E8
  • [25] Fabrication of a novel quartz micromachined gyroscope
    Xie, Liqiang
    Xing, Jianchun
    Wang, Haoxu
    Wu, Xuezhong
    AIP ADVANCES, 2015, 5 (04)
  • [26] Study on micromachined gyroscope of a novel structure
    Dong, HF
    Zhang, WD
    Su, SJ
    Shi, YB
    ISTM/2001: 4TH INTERNATIONAL SYMPOSIUM ON TEST AND MEASUREMENT, VOLS 1 AND 2, CONFERENCE PROCEEDINGS, 2001, : 49 - 52
  • [27] Study of a novel silicon micromachined gyroscope
    Xiong, B
    Wang, YL
    Huang, XZ
    Che, LF
    Wang, WY
    SOLID-STATE AND INTEGRATED-CIRCUIT TECHNOLOGY, VOLS 1 AND 2, PROCEEDINGS, 2001, : 746 - 748
  • [28] A new micromachined gyroscope with digital output
    Lang, M
    Grossmann, M
    Prütz, O
    Koster, M
    Franz, J
    Wucher, G
    Mayer, T
    Gangei, A
    Steiger, E
    ADVANCED MICROSYSTEMS FOR AUTOMOTIVE APPLICATIONS 2003, 2003, : 127 - 136
  • [29] Experiments and results of the silicon micromachined gyroscope
    Zhang, Fu-Xue
    Yan, Qing-Wen
    Zhang, Wei
    JOURNAL OF MICRO-NANOLITHOGRAPHY MEMS AND MOEMS, 2009, 8 (02):
  • [30] Design and fabrication of a micromachined resonant gyroscope
    Tay, FEH
    Liang, YC
    Logeeswaran, VJ
    INTERNATIONAL JOURNAL OF ELECTRONICS, 1999, 86 (10) : 1179 - 1191
12345