Study on fibre orientation of weld line parts during injection moulding of fibre reinforced plastic by image processing

被引：18
|
作者：
Kim, J. W. [2 ]
Kim, H. S. [3 ]
Lee, D. G. [1 ]
机构：
[1] Chosun Univ, Dept Mechatron Engn, Kwangju 501759, South Korea
[2] Iowa State Univ, Ctr NDE, Ames, IA 50011 USA
[3] Chosun Univ, Grad Sch, Dept Adv Parts & Mat Engn, Kwangju 501759, South Korea
来源：
MATERIALS RESEARCH INNOVATIONS | 2011年 / 15卷
关键词：
Injection moulding; Fibre orientation function; Fibre content ratio; Image processing; FRP; Weld line; FRP;
D O I：
10.1179/143307511X12858957674274
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In injection moulded products using fibre reinforced plastics, weld line was unavoidable due to mould shaping factors such as the position and size and number of mould gates. The weld line leads to fibre orientation perpendicular to resin flow direction, sudden reduction of the reinforcement effect and consequently degrading of the mechanical properties of moulded products. Until now, there has been no research on the measurement of fibre orientation in the weld line using image processing. Using the image processing method, the fibre orientation distribution of weld line in injection moulded products was assessed. The effects of fibre content and injection mould gate conditions on the fibre orientation were also discussed.
引用
收藏
页码：S303 / S306
页数：4
相关论文
共 50 条
  • [21] Short-fibre-reinforced injection moulded parts
    Mlekusch, B
    KUNSTSTOFFE-PLAST EUROPE, 1999, 89 (07): : 33 - +
  • [22] INFLUENCE OF MATERIAL PARAMETERS ON FIBRE ORIENTATION DURING THE PROCESSING OF SHORT-FIBRE REINFORCED THERMOPLASTICS.
    Hegler, R.P.
    Altstaedt, V.
    Ehrenstein, G.W.
    Mennig, G.
    Scharschmidt, J.
    Weber, G.
    Kunststoffe - German Plastics, 1986, 76 (09): : 18 - 21
  • [23] Preliminary study on the influence of fibre orientation in fibre reinforced mortars
    Michels, Julien
    Gams, Matija
    GRADEVINAR, 2016, 68 (08): : 645 - 655
  • [24] Fibre Length Reduction in Natural Fibre-Reinforced Polymers during Compounding and Injection Moulding-Experiments Versus Numerical Prediction of Fibre Breakage
    Albrecht, Katharina
    Osswald, Tim
    Baur, Erwin
    Meier, Thomas
    Wartzack, Sandro
    Muessig, Joerg
    JOURNAL OF COMPOSITES SCIENCE, 2018, 2 (02):
  • [25] Influence of plasticisation during foam injection moulding on the melt viscosity and fibre length of long glass fibre-reinforced polypropylene
    Hopmann, Christian
    Wolters, Jan
    JOURNAL OF POLYMER ENGINEERING, 2024, 44 (09) : 695 - 702
  • [26] MODIFICATION OF GLASS-FIBRE REINFORCED POLYAMIDES IN INJECTION MOULDING.
    Obieglo, G.
    Roller, B.
    Kunststoffe - German Plastics, 1986, 76 (08): : 28 - 29
  • [27] Microcellular wood fibre reinforced polypropylene composites in an injection moulding process
    Bledzki, AK
    Faruk, O
    CELLULAR POLYMERS, 2002, 21 (06) : 417 - 429
  • [28] The warpage of corners in the injection moulding of short-fibre-reinforced thermoplastics
    Inst. for Designing Plastics, University of Leoben, Leoben, Austria
    Compos. Sci. Technol., 12 (1923-1931):
  • [29] The warpage of corners in the injection moulding of short-fibre-reinforced thermoplastics
    Mlekusch, B
    COMPOSITES SCIENCE AND TECHNOLOGY, 1999, 59 (12) : 1923 - 1931
  • [30] Microcellular wood fibre reinforced PP composites - A comparative study between extrusion, injection moulding and compression moulding
    Bledzki, A. K.
    Faruk, O.
    INTERNATIONAL POLYMER PROCESSING, 2006, 21 (03) : 256 - 262
12345