KrF excimer laser induced ablation-planarization of GaN surface

被引：33
|
作者：
Akane, T
Sugioka, K
Ogino, H
Takai, H
Midorikawa, K
机构：
[1] RIKEN, Inst Phys & Chem Res, Wako, Saitama 3510198, Japan
[2] Tokyo Denki Univ, Fac Engn, Dept Elect Engn, Tokyo 1018457, Japan
来源：
APPLIED SURFACE SCIENCE | 1999年 / 148卷 / 1-2期
关键词：
GaN; ablation; planerization; KrF excimer laser; X-ray photoelectron spectroscopy (XPS); atomic force microscopy (AFM);
D O I：
10.1016/S0169-4332(99)00156-7
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The surface roughness of an as-grown GaN epilayer is reduced using a combination of KrF excimer laser irradiation and post chemical wet treatment. KrF excimer laser irradiation ablates GaN surfaces. resulting in the formation of a Ga-rich layer on the surface. The Ga-rich layer is etched off by hydrochloric acid treatment. X-ray photoelectron spectroscopic (XPS) analysis reveals that the chemically etched surface has similar composition and chemical bonding to those of untreated GaN. The average roughness (R-a) is improved by similar to 43% compared with an untreated GaN sample with a laser fluence of over 2.0 J/cm(2). (C) 1999 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：133 / 136
页数：4
相关论文
共 50 条
  • [41] Gigaphoton tests KrF excimer laser
    不详
    PHOTONICS SPECTRA, 2017, 51 (02) : 16 - 16
  • [42] Sub-500-nm patterning of glass by nanosecond KrF excimer laser ablation
    J. Bekesi
    J. Meinertz
    P. Simon
    J. Ihlemann
    Applied Physics A, 2013, 110 : 17 - 21
  • [43] Sub-500-nm patterning of glass by nanosecond KrF excimer laser ablation
    Bekesi, J.
    Meinertz, J.
    Simon, P.
    Ihlemann, J.
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2013, 110 (01): : 17 - 21
  • [44] Study of direct deep-etch photoresist via KrF excimer laser ablation
    Shen, Beijun
    Wang, Runwen
    Lu, Dunwu
    Wang, Liding
    Liang, Jingqiu
    Yao, Jingsong
    Journal of Functional Materials and Devices, 1998, 4 (02): : 126 - 130
  • [45] Preparation of PZT thin films on YBCO electrodes by KrF excimer laser ablation technique
    Kurogi, H
    Yamagata, Y
    Ebihara, K
    Inoue, N
    SURFACE & COATINGS TECHNOLOGY, 1998, 100 (1-3): : 424 - 427
  • [46] Correction of a coherent image during KrF excimer laser ablation using a mask projection
    Shin, DS
    Lee, JH
    Suh, J
    Kim, TH
    OPTICS AND LASERS IN ENGINEERING, 2006, 44 (06) : 615 - 622
  • [47] The Water-Based Synthesis of Platinum Nanoparticles Using KrF Excimer Laser Ablation
    Lazar, Oana Andreea
    Moise, Calin Constantin
    Nikolov, Anastas Savov
    Enache, Laura-Bianca
    Mihai, Geanina Valentina
    Enachescu, Marius
    NANOMATERIALS, 2022, 12 (03)
  • [48] Synthesis and characterization of ferroelectric thin films by KrF excimer laser ablation for memory applications
    Kumar, A
    Alam, MR
    ADVANCES IN LASER ABLATION OF MATERIALS, 1998, 526 : 211 - 217
  • [49] Deposition of Er:YAG (YAP) layers by subpicosecond and nanosecond KrF excimer laser ablation
    Jelinek, M
    Klini, A
    Grivas, C
    Lancok, J
    Studnicka, V
    Chval, J
    Macková, A
    Fotakis, C
    APPLIED SURFACE SCIENCE, 2002, 197 : 416 - 420
  • [50] Submicron-resolution ablation with a KrF excimer laser beam patterned with a projection lens
    F. Weisbuch
    S. Lazare
    F.N. Goodall
    D. Débarre
    Applied Physics A, 1999, 69 : S413 - S417
12345