KrF excimer laser induced ablation-planarization of GaN surface

被引：33
|
作者：
Akane, T
Sugioka, K
Ogino, H
Takai, H
Midorikawa, K
机构：
[1] RIKEN, Inst Phys & Chem Res, Wako, Saitama 3510198, Japan
[2] Tokyo Denki Univ, Fac Engn, Dept Elect Engn, Tokyo 1018457, Japan
来源：
APPLIED SURFACE SCIENCE | 1999年 / 148卷 / 1-2期
关键词：
GaN; ablation; planerization; KrF excimer laser; X-ray photoelectron spectroscopy (XPS); atomic force microscopy (AFM);
D O I：
10.1016/S0169-4332(99)00156-7
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The surface roughness of an as-grown GaN epilayer is reduced using a combination of KrF excimer laser irradiation and post chemical wet treatment. KrF excimer laser irradiation ablates GaN surfaces. resulting in the formation of a Ga-rich layer on the surface. The Ga-rich layer is etched off by hydrochloric acid treatment. X-ray photoelectron spectroscopic (XPS) analysis reveals that the chemically etched surface has similar composition and chemical bonding to those of untreated GaN. The average roughness (R-a) is improved by similar to 43% compared with an untreated GaN sample with a laser fluence of over 2.0 J/cm(2). (C) 1999 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：133 / 136
页数：4
相关论文
共 50 条
  • [31] The comparison of ITO ablation characteristics using KrF excimer and Nd:YAG laser
    Lee, K
    Lee, C
    SECOND INTERNATIONAL SYMPOSIUM ON LASER PRECISION MICROFABRICATION, 2002, 4426 : 260 - 263
  • [32] KrF excimer laser induced ohmic metallization of ZnO substrate
    Akane, T
    Sugioka, K
    Midorikawa, K
    LASER APPLICATIONS IN MICROELECTRONIC AND OPTOELECTRONIC MANUFACTURING V, 2000, 3933 : 218 - 224
  • [33] Synthesis of Platinum Nanoparticles by Pulsed Laser Ablation with an Excimer KrF Laser in Deep Eutectic Solvents
    Lazar, Oana Andreea
    Nikolov, Anastas Savov
    Anicai, Liana
    Mihai, Geanina Valentina
    Messina, Angelo Alberto
    Enachescu, Marius
    ACS OMEGA, 2025, 10 (08): : 8066 - 8081
  • [34] Microchannel Fabrication in Fused Quartz by Backside Laser-Induced Plasma Ablation Using 248 nm KrF Excimer Laser
    Zhao, Yu
    Li, Qian
    Wang, Zhengfei
    Dai, Ziruo
    Chen, Tao
    APPLIED SCIENCES-BASEL, 2019, 9 (24):
  • [35] Surface modification of glassy carbon using pulsed KrF excimer laser
    Saitoh, Hidetoshi
    Shinada, Takahiro
    Ohkawara, Yoshiaki
    Ohshio, Shigeo
    Hiraga, Hitoshi
    Inoue, Takashi
    Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers, 2002, 41 (6 A): : 3890 - 3895
  • [36] Ablation and cleaning of wafer surface by excimer laser
    Kim, YK
    Kim, DJ
    Ryu, JK
    Pak, SS
    LASER APPLICATIONS IN MICROELECTRONIC AND OPTOELECTRONIC MANUFACTURING VI, 2001, 4274 : 9 - 17
  • [37] Surface modification of glassy carbon using pulsed KrF excimer laser
    Saitoh, H
    Shinada, T
    Ohkawara, Y
    Ohshio, S
    Hiraga, H
    Inoue, T
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2002, 41 (6A): : 3890 - 3895
  • [38] Photonic ZnO and magnetoresistive LSMO film preparation using KrF Excimer laser ablation
    Ebihara, K
    Thareja, RK
    PROCEEDINGS OF THE ELEVENTH INTERNATIONAL WORKSHOP ON THE PHYSICS OF SEMICONDUCTOR DEVICES, VOL 1 & 2, 2002, 4746 : 167 - 172
  • [39] Surface Topography of Si/TiO2 Stacked Layers on Silicon Substrate Deposited by KrF Excimer Laser Ablation
    Moise, Calin Constantin
    Pantazi, Aida
    Mihai, Geanina Valentina
    Jderu, Alin
    Bercu, Mircea
    Messina, Angelo Alberto
    Enachescu, Marius
    COATINGS, 2021, 11 (11)
  • [40] Comparison of KrF and ArF excimer laser treatment of biopolymer surface.
    Michaljanicova, I.
    Slepicka, P.
    Heitz, J.
    Barb, R. A.
    Sajdl, P.
    Svorcik, V.
    APPLIED SURFACE SCIENCE, 2015, 339 : 144 - 150
12345