KrF excimer laser induced ablation-planarization of GaN surface

被引：33
|
作者：
Akane, T
Sugioka, K
Ogino, H
Takai, H
Midorikawa, K
机构：
[1] RIKEN, Inst Phys & Chem Res, Wako, Saitama 3510198, Japan
[2] Tokyo Denki Univ, Fac Engn, Dept Elect Engn, Tokyo 1018457, Japan
来源：
APPLIED SURFACE SCIENCE | 1999年 / 148卷 / 1-2期
关键词：
GaN; ablation; planerization; KrF excimer laser; X-ray photoelectron spectroscopy (XPS); atomic force microscopy (AFM);
D O I：
10.1016/S0169-4332(99)00156-7
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The surface roughness of an as-grown GaN epilayer is reduced using a combination of KrF excimer laser irradiation and post chemical wet treatment. KrF excimer laser irradiation ablates GaN surfaces. resulting in the formation of a Ga-rich layer on the surface. The Ga-rich layer is etched off by hydrochloric acid treatment. X-ray photoelectron spectroscopic (XPS) analysis reveals that the chemically etched surface has similar composition and chemical bonding to those of untreated GaN. The average roughness (R-a) is improved by similar to 43% compared with an untreated GaN sample with a laser fluence of over 2.0 J/cm(2). (C) 1999 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：133 / 136
页数：4
相关论文
共 50 条
  • [21] Surface foaming of collagen, chitosan and other biopolymer films by KrF excimer laser ablation in the photomechanical regime
    Lazare, S
    Tokarev, V
    Sionkowska, A
    Wisniewski, M
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2005, 81 (03): : 465 - 470
  • [22] GaN etching by simultaneous irradiation of KrF excimer laser and F2 laser
    Akane, T
    Sugioka, K
    Obata, K
    Nomura, S
    Hammura, K
    Aoki, N
    Toyoda, K
    Aoyagi, Y
    Midorikawa, K
    LASER APPLICATIONS IN MICROELECTRONIC AND OPTOELECTRONIC MANUFACTURING VI, 2001, 4274 : 133 - 140
  • [23] METAL PLANARIZATION WITH AN EXCIMER LASER
    ONG, E
    CHU, H
    CHEN, SA
    SOLID STATE TECHNOLOGY, 1991, 34 (08) : 63 - 68
  • [24] Indications for excimer laser surface ablation
    Netto, MV
    Wilson, SE
    JOURNAL OF REFRACTIVE SURGERY, 2005, 21 (06) : 734 - 741
  • [25] Excimer laser surface ablation - a review
    Reynolds, Anita
    Moore, Johnny E.
    Naroo, Shehzad A.
    Moore, C. B. Tara
    Shah, Sunil
    CLINICAL AND EXPERIMENTAL OPHTHALMOLOGY, 2010, 38 (02): : 168 - 182
  • [26] Direct fabrication of microgratings in fused quartz by laser-induced plasma-assisted ablation with a KrF excimer laser
    Zhang, J
    Sugioka, K
    Midorikawa, K
    OPTICS LETTERS, 1998, 23 (18) : 1486 - 1488
  • [27] Depth-profile investigations of triterpenoid varnishes by KrF excimer laser ablation and laser-induced breakdown spectroscopy
    Theodorakopoulos, C.
    Zafiropulos, V.
    APPLIED SURFACE SCIENCE, 2009, 255 (20) : 8520 - 8526
  • [28] Surface modification of dental tissues by KrF excimer laser radiation
    Sivakumar, M.
    Oliveira, V
    Vilar, R.
    LASERS IN DENTISTRY XIII, 2007, 6425
  • [29] Pumping a krf excimer laser by a laser discharge induced by an ir laser beam
    Igoshin, V.I.
    Pichugin, S.Yu.
    Quantum Electronics(English Translation of the Journal Kvantovaya Elektronika), 1993, 20 (01):
  • [30] Microstructure on titanium oxide and silicon nitride formed by KrF excimer laser ablation
    Shimoda, T
    Takahashi, K
    Obara, M
    CLEO(R)/PACIFIC RIM 2001, VOL I, TECHNICAL DIGEST, 2001, : 32 - 33
12345