A study of hot-hole injection during programming drain disturb in flash memories

被引:21
|
作者
Ielmini, D [1 ]
Ghetti, A
Spinelli, AS
Visconti, A
机构
[1] Politecn Milan, Dipartimento Elettron & Informaz, I-20133 Milan, Italy
[2] STMicroelectronics, I-20041 Agrate Brianza, Italy
关键词
Flash memories; hot carriers; Monte Carlo (MC) modeling; reliability modeling;
D O I
10.1109/TED.2006.870280
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Program disturbs in NOR-type Flash arrays significantly degrade the tunnel oxide by hot-hole injection (HHI) induced by hand-to-hand tunneling at the drain overlap. This paper provides a comprehensive experimental and modeling analysis of HHI in Flash memories under program-disturb conditions. Carrier-separation measurements on arrays of Flash memories with contacted floating-gate (FG) allows for a direct investigation of hole-initiated impact ionization and HHI. A Monte Carlo (MC) model is used to simulate carrier multiplication and injection into the FG. After validating the MC model against experimental data for both secondary electron generation and HHI, the model is used to provide further insight into the hole-injection mechanism.
引用
收藏
页码:668 / 676
页数:9
相关论文
共 50 条
  • [31] Electron traps and excess current induced by hot-hole injection into thin SiO2 films
    Kobayashi, K
    Teramoto, A
    Matsui, Y
    Hirayama, M
    Yasuoka, A
    Nakamura, T
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1996, 143 (10) : 3377 - 3383
  • [32] INTERFACE-TRAP GENERATION INDUCED BY HOT-HOLE INJECTION AT THE SI-SIO2 INTERFACE
    OGAWA, S
    SHIONO, N
    APPLIED PHYSICS LETTERS, 1992, 61 (07) : 807 - 809
  • [33] Enhanced degradation in P+-poly PMOSFETs with oxynitride gate dielectrics under hot-hole injection
    Chen, YY
    Gardner, M
    Fulford, J
    Wristers, D
    Joshi, AB
    Kwong, DL
    ULTRATHIN SIO2 AND HIGH-K MATERIALS FOR ULSI GATE DIELECTRICS, 1999, 567 : 283 - 288
  • [34] OXIDE THICKNESS DEPENDENCE OF INTERFACE-TRAP GENERATION IN A METAL-OXIDE-SEMICONDUCTOR STRUCTURE DURING SUBSTRATE HOT-HOLE INJECTION
    KHOSRU, QDM
    YASUDA, N
    TANIGUCHI, K
    HAMAGUCHI, C
    APPLIED PHYSICS LETTERS, 1993, 63 (18) : 2537 - 2539
  • [35] Testing and programming flash memories on assemblies during high volume production
    de Jong, FGM
    Biewenga, AS
    van Geest, DCL
    Waayers, TF
    INTERNATIONAL TEST CONFERENCE 2001, PROCEEDINGS, 2001, : 470 - 479
  • [36] Constant-charge-injection programming: A novel high-speed programming method for multilevel flash memories
    Kurata, H
    Saeki, S
    Kobayashi, T
    Sasago, Y
    Arigane, T
    Otsuga, K
    Kawahara, T
    IEEE JOURNAL OF SOLID-STATE CIRCUITS, 2005, 40 (02) : 523 - 531
  • [37] Calibration of hole scattering rates in silicon with a large set of experimental data including high voltage quantum yield, drain disturb and substrate hole injection
    Ghetti, A
    2003 IEEE INTERNATIONAL CONFERENCE ON SIMULATION OF SEMICONDUCTOR PROCESSES AND DEVICES, 2003, : 71 - 74
  • [38] Simulation of the programming efficiency and the energy consumption of Flash memories during endurance degradation
    Postel-Pellerin, J.
    Chiquet, P.
    Della Marca, V.
    2016 39TH INTERNATIONAL SEMICONDUCTOR CONFERENCE (CAS), 2016, : 101 - 104
  • [40] Excess currents induced by hot-hole injection and F-N stress in thin SiO2 films
    Teramoto, A
    Kobayashi, K
    Matsui, Y
    Hirayama, M
    Yasuoka, A
    1996 IEEE INTERNATIONAL RELIABILITY PHYSICS PROCEEDINGS, 34TH ANNUAL, 1996, : 113 - 116