Sample geometry effect on mechanical property of gold micro-cantilevers by micro-bending test

被引：4

作者：

Suzuki, Kosuke ^{[1
]}

Chang, Tso-Fu Mark ^{[1
]}

Hashigata, Ken ^{[1
]}

Asano, Keisuke ^{[1
]}

Chen, Chun-Yi ^{[1
]}

Nagoshi, Takashi ^{[2
]}

Yamane, Daisuke ^{[1
]}

Ito, Hiroyuki ^{[1
]}

Machida, Katsuyuki ^{[1
]}

Masu, Kazuya ^{[1
]}

Sone, Masato ^{[1
]}

机构：

[1] Tokyo Inst Technol, Inst Innovat Res, Yokohama, Kanagawa 2268503, Japan

[2] Natl Inst Adv Ind Sci & Technol, Tsukuba, Ibaraki 3058560, Japan

来源：

MRS COMMUNICATIONS | 2020年 / 10卷 / 03期

关键词：

TENSILE BEHAVIOR; FILMS; PLASTICITY; COPPER; NICKEL;

D O I：

10.1557/mrc.2020.38

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Sample geometry effects on mechanical strengths of gold micro-cantilevers are evaluated by a micro-bending test. Six micro-cantilevers with the same length of 50 mu m are prepared, and the width and the thickness are varied to examine individual effects on the yield stress. The yield stress increases from 428 to 519 MPa when the thickness decreases from 11.1 to 6.0 mu m. No obvious dependency is observed when varying the width. The results reveal that the thickness and the width each has a different influence on the yield stresses of micro-cantilevers evaluated by the bending test, which is the sample geometry effect.

引用

页码：434 / 438

页数：5

共 50 条

[41] Effect of Surface Treatment on the Mechanical Property and Micro-structrue of Polypropylene/Attapulgite Composites
Xu, Lili
Long, Tao
Liu, Shengpeng
NEW MATERIALS, APPLICATIONS AND PROCESSES, PTS 1-3, 2012, 399-401 : 453 - +
[42] Effect of roughness geometry on friction during micro V-die bending by using finite element method
Daw-Kwei Leu
The International Journal of Advanced Manufacturing Technology, 2013, 68 : 227 - 240
[43] Effect of roughness geometry on friction during micro V-die bending by using finite element method
Leu, Daw-Kwei
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 68 (1-4): : 227 - 240
[44] Coupling effect of loading rate and saturated water on mechanical behavior and micro damage property of sandstone
Wang, Yunfei
Liu, Xiao
Wang, Liping
Li, Zhichao
Chen, Yan
Rong, Tenglong
Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2022, 39 (02): : 421 - 428
[45] Effect of Sample Tilt and Normal Load on Micro-Scratch Test of Copper with a Spherical Indenter
Liu M.
Huang C.
Gao C.
Mocaxue Xuebao/Tribology, 2021, 41 (01): : 27 - 37
[46] EFFECT OF MICRO-STRUCTURAL GEOMETRY ON LUBRICANT INFILTRATION AND PROPERTY OF SLIPPERY LIQUID-INFUSED POROUS SURFACES
Suwan, Mantana
Sangwong, Nuchjarin
Atthi, Nithi
Pattamang, Pattaraluck
Sripumkhai, Witsaroot
Supothina, Sitthisuntorn
SURFACE REVIEW AND LETTERS, 2022, 29 (02)
[47] Mechanical property analysis of yarn pull-out from aramid plain woven fabrics based on micro-geometry
Ma Y.
Liu Y.
Zhao Y.
Chen X.
Lu S.
Hu H.
Fangzhi Xuebao/Journal of Textile Research, 2022, 43 (04): : 47 - 54
[48] Effect of the alumina micro-particle sizes on the thermal conductivity and dynamic mechanical property of epoxy resin
Xu, Zhe
Zhang, Cheng
Li, Yang
Zou, Jun
Li, Yuefeng
Yang, Bobo
Hu, Rongrong
Qian, Qi
PLOS ONE, 2023, 18 (10):
[49] The effect of sodium citrate on NaOH-activated BFS cement: Hydration, mechanical property, and micro/nanostructure
Qu, Bo
Liu, Tianle
Duan, Longchen
Gong, Cheng
Luo, Wenjun
He, Chenhao
Lv, Yang
CEMENT & CONCRETE COMPOSITES, 2022, 133
[50] Nanoindentation and FEM study of the effect of internal stress on micro/nano mechanical property of thin CNx films
Bai, MW
Kato, K
Umehara, N
Miyake, Y
THIN SOLID FILMS, 2000, 377 : 138 - 147

← 1 2 3 4 5 →