On the use of Vibration Signal Analysis for Industrial Quality Control: Part I

被引：0
|
作者：
D'Elia, Gianluca [1 ]
Delvecchio, Simone [1 ]
Malago, Marco [1 ]
Dalpiaz, Giorgio [1 ]
机构：
[1] Univ Ferrara, Engn Dept Ferrara EnDIF, I-44100 Ferrara, Italy
来源：
ADVANCES IN CONDITION MONITORING OF MACHINERY IN NON-STATIONARY OPERATIONS | 2014年
关键词：
Vibration; Condition monitoring; Quality control; Helical gears; Diesel engines; Cold test; ELASTODYNAMIC ANALYSIS; SIMULATION;
D O I：
10.1007/978-3-642-39348-8_34
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Vibration signals can be successfully captured and analyzed for quality control at the end of the production line. Various signal processing techniques and their applications are presented in this paper. These applications demonstrate the importance of selecting proper signal processing tools in order to extract the most reliable information from the signals. The presented applications regards tooth fault detection in helical gears and the detection of assembly faults in diesel engines by means of cold test technology.
引用
收藏
页码：399 / 406
页数：8
相关论文
共 50 条
  • [31] KNOWLEDGE DISCOVERY IN INDUSTRIAL DATASETS: APPLICATION. PART I - ANALYSIS
    Ghizdavet, Zeno
    REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS, 2010, 40 (02): : 161 - 176
  • [32] Blasting Vibration Control and Signal Analysis of Adjacent Existing Deterioration Tunnels
    Xu, Wenxiang
    Shi, Jianjun
    Zhang, Hao
    APPLIED SCIENCES-BASEL, 2024, 14 (05):
  • [33] Vibration Signal Analysis of Induction Motors used in Process Control Operation
    Mitra, S.
    Koley, C.
    2013 IEEE 1ST INTERNATIONAL CONFERENCE ON CONDITION ASSESSMENT TECHNIQUES IN ELECTRICAL SYSTEMS (CATCON), 2013, : 286 - 291
  • [34] Independent model space vibration control of an axially moving cantilever beam-Part I: theoretical analysis of approximation
    Li, Shanhu
    Yang, Jingbo
    Huang, Qinghua
    Chen, Decheng
    Yingyong Lixue Xuebao/Chinese Journal of Applied Mechanics, 2002, 19 (01):
  • [35] Slabs deburring: quality control by camera, operating control by signal analysis
    Sereno, G
    Salon, JL
    Laigneau, JP
    Gangnery, JC
    Serkis, A
    REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1998, 95 (06): : 777 - +
  • [36] Chilling and freezing of part-baked bread. Part I: An MRI signal analysis
    Lucas, T
    Le Ray, D
    Davenel, A
    JOURNAL OF FOOD ENGINEERING, 2005, 70 (02) : 139 - 149
  • [37] Research in industrial statistics - Part I
    Montgomery, D
    QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 2001, 17 (06) : III - IV
  • [38] Vibration analysis of industrial robots
    Karim, Ali
    Michalkowski, Carissa
    Lechler, Armin
    Verl, Alexander
    WT Werkstattstechnik, 2019, 109 (09): : 656 - 661
  • [39] SIGNAL ANALYZER .I. A SIGNAL ANALYSIS SYSTEM FOR MANUAL CONTROL STUDIES
    GRIGNETT.MC
    PAYNE, RV
    ELKIND, JJ
    IEEE SPECTRUM, 1965, 2 (03) : 58 - &
  • [40] Application of fractal geometry to analysis of vibration signal of I.C. engines
    Xia, Y.
    Shang, B.
    Zhang, Z.
    Xue, M.
    Guo, M.
    Journal of Vibration and Shock, 2001, 20 (01) : 59 - 61
12345