On the use of Vibration Signal Analysis for Industrial Quality Control: Part I

被引:0
|
作者
D'Elia, Gianluca [1 ]
Delvecchio, Simone [1 ]
Malago, Marco [1 ]
Dalpiaz, Giorgio [1 ]
机构
[1] Univ Ferrara, Engn Dept Ferrara EnDIF, I-44100 Ferrara, Italy
来源
ADVANCES IN CONDITION MONITORING OF MACHINERY IN NON-STATIONARY OPERATIONS | 2014年
关键词
Vibration; Condition monitoring; Quality control; Helical gears; Diesel engines; Cold test; ELASTODYNAMIC ANALYSIS; SIMULATION;
D O I
10.1007/978-3-642-39348-8_34
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Vibration signals can be successfully captured and analyzed for quality control at the end of the production line. Various signal processing techniques and their applications are presented in this paper. These applications demonstrate the importance of selecting proper signal processing tools in order to extract the most reliable information from the signals. The presented applications regards tooth fault detection in helical gears and the detection of assembly faults in diesel engines by means of cold test technology.
引用
收藏
页码:399 / 406
页数:8
相关论文
共 50 条
  • [21] An investigation into active vibration isolation based on predictive control - Part I: Energy source control
    Fei, H. Z.
    Zheng, G. T.
    Liu, Z. G.
    JOURNAL OF SOUND AND VIBRATION, 2006, 296 (1-2) : 195 - 208
  • [22] Model Predictive Control of Vibration in a Two Flexible Link Manipulator - Part I
    Elliott, J. R.
    Dubay, R.
    Mohany, A.
    Hassan, M.
    JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL, 2014, 33 (04) : 455 - 468
  • [23] Coupling of Vibration of Several Bladed Discs on the Shaft Part I. Free Vibration Analysis
    Rzadkowski, Romuald
    Drewczynski, Marcin
    ADVANCES IN VIBRATION ENGINEERING, 2009, 8 (02): : 125 - 137
  • [24] Comparative analysis of greenhouse gas emission inventory for Pakistan: Part I energy and industrial processes and product use
    Mir, Kaleem Anwar
    Park, Chunkyoo
    Purohit, Pallav
    Kim, Seungdo
    ADVANCES IN CLIMATE CHANGE RESEARCH, 2020, 11 (01) : 40 - 51
  • [25] Control Signal Correction for AMB Vibration Control
    Ferreiro Garcia, Ramon
    Perez Castelo, Francisco Javier
    De Miguel Catoira, Alberto
    53RD INTERNATIONAL SYMPOSIUM ELMAR-2011, 2011, : 243 - 246
  • [26] Design and analysis of a novel L1 adaptive controller, part I:Control signal and asymptotic stability
    Cao, Chengyu
    Naira, Hovakimyan
    2006 AMERICAN CONTROL CONFERENCE, VOLS 1-12, 2006, 1-12 : 3397 - 3402
  • [27] USE OF TIME WAVEFORM CHARACTERISTICS AND PHASE MEASUREMENTS FOR VIBRATION SIGNAL ANALYSIS
    CATLIN, JB
    JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 1976, 60 : S29 - S30
  • [28] Ergonomic Work Analysis of Industrial Quality Control Workstations
    Marques, Elson
    Melo, Rui B.
    Carvalho, Filipa
    ADVANCES IN SAFETY MANAGEMENT AND HUMAN FACTORS, AHFE 2017, 2018, 604 : 532 - 544
  • [29] Application Control Charts for Analysis of Quality in Industrial Painting
    Hessler, Carlos Vilibaldo
    Camargo, Maria Emilia
    Dorion, Eric
    CIE: 2009 INTERNATIONAL CONFERENCE ON COMPUTERS AND INDUSTRIAL ENGINEERING, VOLS 1-3, 2009, : 1330 - 1334
  • [30] Sliding Mode Control and Observation for Complex Industrial Systems-Part I
    Wu, Ligang
    Mazumder, Sudip K.
    Kaynak, Okyay
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2017, 64 (08) : 6680 - 6683