On the use of Vibration Signal Analysis for Industrial Quality Control: Part I

被引：0
|
作者：
D'Elia, Gianluca [1 ]
Delvecchio, Simone [1 ]
Malago, Marco [1 ]
Dalpiaz, Giorgio [1 ]
机构：
[1] Univ Ferrara, Engn Dept Ferrara EnDIF, I-44100 Ferrara, Italy
来源：
ADVANCES IN CONDITION MONITORING OF MACHINERY IN NON-STATIONARY OPERATIONS | 2014年
关键词：
Vibration; Condition monitoring; Quality control; Helical gears; Diesel engines; Cold test; ELASTODYNAMIC ANALYSIS; SIMULATION;
D O I：
10.1007/978-3-642-39348-8_34
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Vibration signals can be successfully captured and analyzed for quality control at the end of the production line. Various signal processing techniques and their applications are presented in this paper. These applications demonstrate the importance of selecting proper signal processing tools in order to extract the most reliable information from the signals. The presented applications regards tooth fault detection in helical gears and the detection of assembly faults in diesel engines by means of cold test technology.
引用
收藏
页码：399 / 406
页数：8
相关论文
共 50 条
  • [11] Corpopate quality measurement for analysis of stability of industrial water use and reliability of water control
    O. M. Rosental
    V. I. Dmitruk
    Journal of Water Chemistry and Technology, 2014, 36 : 280 - 283
  • [12] Corpopate quality measurement for analysis of stability of industrial water use and reliability of water control
    Rosental, O. M.
    Dmitruk, V. I.
    JOURNAL OF WATER CHEMISTRY AND TECHNOLOGY, 2014, 36 (06) : 280 - 283
  • [13] Vibration, pathophysiology, and industrial control
    Cherniack, M
    JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL MEDICINE, 1999, 41 (06) : 419 - 432
  • [14] Thermal Analysis as Part of the Quality System within Industrial Laboratories
    P. H. Willcocks
    N. R. Bosley
    A. Broadhurst
    I. D. Luscombe
    Journal of Thermal Analysis and Calorimetry, 1999, 56 : 1413 - 1418
  • [15] Thermal analysis as part of the quality system within industrial laboratories
    Willcocks, PH
    Bosley, NR
    Broadhurst, A
    Luscombe, ID
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 1999, 56 (03): : 1413 - 1418
  • [16] The use of vibration measurements for quality control of machine tool spindles
    Mannan, MA
    Stone, BJ
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 1998, 14 (12): : 889 - 893
  • [17] The use of vibration measurements for quality control of machine tool spindles
    M. A. Mannan
    B. J. Stone
    The International Journal of Advanced Manufacturing Technology, 1998, 14 : 889 - 893
  • [18] VIBRATION SIGNAL AS A PART OF THE ROCK DISINTEGRATION PROCESS
    Miklugova, Viera
    Ivanicova, Lucia
    Krepelka, Frantisek
    Labas, Milan
    PROCEEDINGS OF 11TH INTERNATIONAL CARPATHIAN CONTROL CONFERENCE, 2010, 2010, : 317 - 320
  • [19] Technical article. A guide to polymers and their use for vibration. Part I
    Nelson, F.C.
    Shock and Vibration Digest, 1994, 26 (02):
  • [20] Statistical quality control through overall vibration analysis
    Carmen Carnero, Ma
    Gonzalez-Palma, Rafael
    Almorza, David
    Mayorga, Pedro
    Lopez-Escobar, Carlos
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2010, 24 (04) : 1138 - 1160
12345