On the use of Vibration Signal Analysis for Industrial Quality Control: Part I

被引：0

作者：

D'Elia, Gianluca ^{[1
]}

Delvecchio, Simone ^{[1
]}

Malago, Marco ^{[1
]}

Dalpiaz, Giorgio ^{[1
]}

机构：

[1] Univ Ferrara, Engn Dept Ferrara EnDIF, I-44100 Ferrara, Italy

来源：

ADVANCES IN CONDITION MONITORING OF MACHINERY IN NON-STATIONARY OPERATIONS | 2014年

关键词：

Vibration; Condition monitoring; Quality control; Helical gears; Diesel engines; Cold test; ELASTODYNAMIC ANALYSIS; SIMULATION;

D O I：

10.1007/978-3-642-39348-8_34

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Vibration signals can be successfully captured and analyzed for quality control at the end of the production line. Various signal processing techniques and their applications are presented in this paper. These applications demonstrate the importance of selecting proper signal processing tools in order to extract the most reliable information from the signals. The presented applications regards tooth fault detection in helical gears and the detection of assembly faults in diesel engines by means of cold test technology.

引用

页码：399 / 406

页数：8

共 50 条

[1] On the use of Vibration Signal Analysis for Industrial Quality Control: Part II
Delvecchio, Simone
D'Elia, Gianluca
Malago, Marco
Dalpiaz, Giorgio
ADVANCES IN CONDITION MONITORING OF MACHINERY IN NON-STATIONARY OPERATIONS, 2014, : 407 - 415
[2] SIGNAL RESTORATION BY THE USE OF THE SINGULAR VALUE ANALYSIS, PART I.
Stanomir, D.
Manescu, O.
Buletinul Institutului Politehnic Bucuresti. Seria electrotehnica, 1987, 49 : 55 - 60
[3] Analysis on the Influence Degree of Processing Quality Parameters on Bearing Vibration (Part I: Theory)
Xia, Xintao
Chen, Xiangfeng
Zhang, Lijun
Chang, Zhen
PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON EDUCATION, MANAGEMENT, INFORMATION AND MECHANICAL ENGINEERING (EMIM 2017), 2017, 76 : 1695 - 1698
[4] Quality control and total quality control applications in the world (Part I)
Perincek, Seher D.
Duran, Deniz
Kirtay, Erhan
TEKSTIL VE KONFEKSIYON, 2008, 18 (02): : 83 - 88
[5] Modelling and Vibration Signal Analysis for Condition Monitoring of Industrial Robots
Han, Huanqing
Shi, Dawei
Gu, Lichang
Wei, Nasha
Gu, Fengshou
PROCEEDINGS OF INCOME-VI AND TEPEN 2021: PERFORMANCE ENGINEERING AND MAINTENANCE ENGINEERING, 2023, 117 : 879 - 891
[6] Evaluation and control of industrial inspection: Part I - Guidelines for the practitioner
Gallwey, TJ
INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 1998, 22 (1-2) : 37 - 49
[7] Evaluation and control of industrial inspection: Part I - Guidelines for the practitioner
Dept. of Mfg. and Operations Eng., University of Limerick, Limerick, Ireland
Int. J. Ind. Ergon., 1-2 (37-49):
[8] Diagnosis of universal motors by current and vibration signal analysis (part 2)
Tech Mess TM, 2 (47):
[9] Quality control of electronic devices by vibration analysis
Di Giulio, G
Nicolini, A
Revel, GM
Tomasini, EP
FOURTH INTERNATIONAL CONFERENCE ON VIBRATION MEASUREMENTS BY LASER TECHNIQUES: ADVANCES AND APPLICATIONS, 2000, 4072 : 434 - 439
[10] Quality control optimization part I: Metrics for evaluating predictive performance of quality control
Schmidt, Robert L.
Pearson, Lauren N.
CLINICA CHIMICA ACTA, 2019, 495 : 174 - 184

← 1 2 3 4 5 →