Preparation of Sn-Ag-In Solder Bumps by Electroplating of Sn-Ag and Indium in Sequence and the Effect of Indium Addition on Microstructure and Shear Strength

被引：3
|
作者：
Wang, Dong-Liang [1 ,2 ]
Yuan, Yuan [1 ]
Luo, Le [1 ]
机构：
[1] Chinese Acad Sci, Shanghai Inst Microsyst & Informat Technol, State Key Lab Transducer Technol, Shanghai 200050, Peoples R China
[2] Chinese Acad Sci, Grad Sch, Beijing 100049, Peoples R China
来源：
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY | 2012年 / 2卷 / 08期
关键词：
Indium additive influence; microstructural change; shear strength; Sn-Ag-In solder bumps; MECHANICAL-PROPERTIES; INTERFACIAL REACTION; CU; JOINTS; CREEP; BI;
D O I：
10.1109/TCPMT.2012.2184110
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper focused on the feasibility of preparing Sn-Ag-In ternary solder bumps with small size by two-step electroplating. The interfacial reaction and shear strength between three different solders (Sn2.2Ag, Sn1.8Ag9.4In, and Sn1.6Ag21.7In) and Cu under bump metallization (UBM) were investigated. After the reflow for 10 min, eta Cu-6(Sn,In)(5) and epsilon Cu-3(Sn,In) intermetallic compounds (IMC) were formed at the interface near the solder matrix and Cu UBM, respectively. Indium addition lowered the reflow temperature and improved the interface between solder and IMCs. The mean shear strength of Sn1.8Ag9.4In solder bump was higher than that of Sn2.2Ag and Sn1.6Ag21.7In solder bumps. After long time reflow, the mean shear strength increased.
引用
收藏
页码：1275 / 1279
页数：5
相关论文
共 50 条
  • [31] Sn-Ag solder bump formation for flip-chip bonding by electroplating
    Arai, S
    Akatsuka, H
    Kaneko, N
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2003, 150 (10) : C730 - C734
  • [32] Study on microstructure and shear strength of Sn-Ag-Sb solder joints
    Lee, HT
    Liao, TL
    Chen, MH
    ADVANCES IN ELECTRONIC MATERIALS AND PACKAGING 2001, 2001, : 315 - 322
  • [33] Intermetallic formation between Sn-Ag(-Cu) solder bumps and Au/Ni/Ti UBM and it's effects on the shear force of the solder bumps
    Park, SH
    Kim, YH
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 1881 - 1884
  • [34] Contact resistance and shear strength of the solder joints formed using Cu bumps capped with Sn or Ag/Sn layer
    Seung-Hyun Lee
    Hee-Ra Roh
    Zhi Gang Chen
    Young-Ho Kim
    Journal of Electronic Materials, 2005, 34 : 1446 - 1454
  • [35] Contact resistance and shear strength of the solder joints formed using Cu bumps capped with Sn or Ag/Sn layer
    Lee, SH
    Roh, HR
    Chen, ZG
    Kim, YH
    JOURNAL OF ELECTRONIC MATERIALS, 2005, 34 (11) : 1446 - 1454
  • [36] Electroplating of lead-free solder alloys composed of Sn-Bi, Sn-Ag, and Sn-Cu
    Yanada, Isamu
    Gudeczauskas, Donald
    Proceedings of the AESF Annual Technical Conference, 1999, : 457 - 468
  • [37] Effects of shear test temperatures and conditions on mechanical properties of Sn-Ag flip-chip solder bumps
    Heo, Min-Haeng
    Lee, Dong-Hwan
    Jeong, Min-Seong
    Yoon, Jeong-Won
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2022, 33 (13) : 10002 - 10012
  • [38] Influence of indium addition on characteristics of Sn-03Ag-0.7Cu solder alloy
    Kanlayasiri, Kannachai
    Mongkolwongrojn, Mongkol
    Ariga, Tadashi
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 485 (1-2) : 225 - 230
  • [39] Effect of Al addition in Sn-Ag solder on the interfacial reactions with Cu and ENIG metallizations
    Jee, Young-Kun
    Xia, Yang-Hua
    Yu, Jin
    Kang, Hyun-Woo
    Lee, Taek-Young
    58TH ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, PROCEEDINGS, 2008, : 491 - +
  • [40] Behavior of surface oxide and intermetallic compounds in interconnections of micro Sn-Ag solder bumps
    Suga, Tadatomo
    Ozaki, Hiroshi
    Ozawa, Hayato
    56TH ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE 2006, VOL 1 AND 2, PROCEEDINGS, 2006, : 1141 - +
12345