Preparation of Sn-Ag-In Solder Bumps by Electroplating of Sn-Ag and Indium in Sequence and the Effect of Indium Addition on Microstructure and Shear Strength

被引：3
|
作者：
Wang, Dong-Liang [1 ,2 ]
Yuan, Yuan [1 ]
Luo, Le [1 ]
机构：
[1] Chinese Acad Sci, Shanghai Inst Microsyst & Informat Technol, State Key Lab Transducer Technol, Shanghai 200050, Peoples R China
[2] Chinese Acad Sci, Grad Sch, Beijing 100049, Peoples R China
来源：
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY | 2012年 / 2卷 / 08期
关键词：
Indium additive influence; microstructural change; shear strength; Sn-Ag-In solder bumps; MECHANICAL-PROPERTIES; INTERFACIAL REACTION; CU; JOINTS; CREEP; BI;
D O I：
10.1109/TCPMT.2012.2184110
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper focused on the feasibility of preparing Sn-Ag-In ternary solder bumps with small size by two-step electroplating. The interfacial reaction and shear strength between three different solders (Sn2.2Ag, Sn1.8Ag9.4In, and Sn1.6Ag21.7In) and Cu under bump metallization (UBM) were investigated. After the reflow for 10 min, eta Cu-6(Sn,In)(5) and epsilon Cu-3(Sn,In) intermetallic compounds (IMC) were formed at the interface near the solder matrix and Cu UBM, respectively. Indium addition lowered the reflow temperature and improved the interface between solder and IMCs. The mean shear strength of Sn1.8Ag9.4In solder bump was higher than that of Sn2.2Ag and Sn1.6Ag21.7In solder bumps. After long time reflow, the mean shear strength increased.
引用
收藏
页码：1275 / 1279
页数：5
相关论文
共 50 条
  • [21] The Effects of Ni Nanoparticles Addition on Shear Behavior and Microstructure of Sn-Ag Lead-free Solder
    Qi, Fangjuan
    Sun, Li
    Hou, Zhezhe
    Wang, Jianqiang
    Qin, Cha
    2008 INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING, VOLS 1 AND 2, 2008, : 589 - 591
  • [22] Shear strength and aging characteristics of Sn-Pb and Sn-Ag-Bi solder bumps
    Choi, JW
    Oh, TS
    ADVANCES IN ELECTRONIC MATERIALS AND PACKAGING 2001, 2001, : 433 - 437
  • [23] Effects of Ag Content on Electromigration of Sn-Ag Solder Bumps in C4 Package
    Ha, Sang-Su
    Chun, Hyunsuk
    Choi, Hyun-Jun
    Noh, Bo-In
    Park, J.
    2012 IEEE INTERNATIONAL INTEGRATED RELIABILITY WORKSHOP FINAL REPORT, 2012, : 132 - 135
  • [24] Influence of Sb addition on microstructural evolution of Sn-Ag solder
    Lee, HT
    Chen, MH
    Hu, SY
    Li, CS
    PROCEEDINGS OF THE 4TH INTERNATIONAL SYMPOSIUM ON ELECTRONIC MATERIALS AND PACKAGING, 2002, : 139 - 144
  • [25] Microstructure and shear strength evolution of Sn-Ag-Cu solder bumps during aging at different temperatures
    Li, DZ
    Liu, CQ
    Conway, PP
    JOURNAL OF ELECTRONIC MATERIALS, 2006, 35 (03) : 388 - 398
  • [26] Microstructure and shear strength evolution of Sn-Ag-Cu solder bumps during aging at different temperatures
    Dezhi Li
    Changqing Liu
    Paul P. Conway
    Journal of Electronic Materials, 2006, 35 : 388 - 398
  • [27] Effect of Ag content on properties of Sn-Ag binary alloy solder
    Suganuma, K
    Huh, SH
    Kim, K
    Nakase, H
    Nakamura, Y
    MATERIALS TRANSACTIONS JIM, 2001, 42 (02): : 286 - 291
  • [28] Copper substrate dissolution in eutectic Sn-Ag solder and its effect on microstructure
    S. Chada
    R. A. Fournelle
    W. Laub
    D. Shangguan
    Journal of Electronic Materials, 2000, 29 : 1214 - 1221
  • [29] Copper substrate dissolution in eutectic Sn-Ag solder and its effect on microstructure
    Chada, S
    Fournelle, RA
    Laub, W
    Shangguan, D
    JOURNAL OF ELECTRONIC MATERIALS, 2000, 29 (10) : 1214 - 1221
  • [30] A highly stable electroplating bath for micro -scale Sn-Ag solder bumping
    Hu, Fengming
    Huang, Feifei
    Yan, Yan
    Fang, Chao
    Wang, Yunpeng
    Huang, Mingliang
    2022 23RD INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, ICEPT, 2022,
12345