Wear mechanisms of several cutting tool materials in hard turning of high carbon-chromium tool steel

被引：70
|
作者：
Shalaby, M. A. [1 ]
El Hakim, M. A. [2 ]
Abdelhameed, Magdy M. [2 ]
Krzanowski, J. E. [3 ]
Veldhuis, S. C. [4 ]
Dosbaeva, G. K. [4 ]
机构：
[1] Tech Res Ctr, Cairo, Egypt
[2] Ain Shams Univ, Fac Engn, Cairo, Egypt
[3] Univ New Hampshire, Dept Mech Engn, Durham, NH 03824 USA
[4] McMaster Univ, Dept Mech Engn, Hamilton, ON L8S 4L7, Canada
来源：
TRIBOLOGY INTERNATIONAL | 2014年 / 70卷
基金：
美国国家科学基金会;
关键词：
Hard turning; Tool wear; PCBN tool material; Alumina ceramic tool material; CUBIC BORON-NITRIDE; CHIP INTERFACE; COATINGS; BEHAVIOR; SURFACE; PCBN; FRICTION; FILMS;
D O I：
10.1016/j.triboint.2013.10.011
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The present study illustrates the performance of three different cutting tool materials, namely: PCBN, TIN coated PCBN, and mixed aluminum ceramic (Al2O3+TiC) in the turning of medium hardened D2 tool steel (52 HRC). Formation of Cr-O tribofilms on the ceramic tool surface as a result of interaction with the workpiece material and environment (identified by X-ray Photoelectron Spectroscopy) leads to improvement of lubricating properties at the tool/chip interface. Obtained results revealed that the mixed alumina ceramic tool can outperform both types of PCBN under different machinability criteria. Crown Copyright (C) 2013 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：148 / 154
页数：7
相关论文
共 50 条
  • [41] CUTTING FORCES IN HARD TURNING COMPRISING TOOL FLANK WEAR AND ITS IMPLICATION FOR THE FRICTION BETWEEN TOOL AND WORKPIECE
    Milutinovic, Milan
    Tanovic, Ljubodrag
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2016, 23 (05): : 1373 - 1379
  • [42] THE EFFECT OF THE TOOL WEAR CRITERION ON THE PERMISSIBLE CUTTING SPEED WHEN TURNING STEEL
    KUSHNER, VS
    SOVIET ENGINEERING RESEARCH, 1982, 2 (02): : 59 - 62
  • [43] Effect of tool nose radius and tool wear on residual stress distribution in hard turning of bearing steel
    Liu, M
    Takagi, J
    Tsukuda, A
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 150 (03) : 234 - 241
  • [44] Cutting tool edge temperature in finish hard turning of case hardened steel
    Tanaka, Ryutaro
    Morishita, Hiroki
    Lin, Yongchuan
    Hosokawa, Akira
    Ueda, Takashi
    Furumoto, Tatsuaki
    Key Engineering Materials, 2009, 407-408 : 538 - 541
  • [45] Cutting Tool Edge Temperature in Finish Hard Turning of Case Hardened Steel
    Tanaka, Ryutaro
    Morishita, Hiroki
    Lin, Yongchuan
    Hosokawa, Akira
    Ueda, Takashi
    Furumoto, Tatsuaki
    PROGRESS OF MACHINING TECHNOLOGY, 2009, 407-408 : 538 - 541
  • [46] A study of chatter frequency of a cutting tool with tool wear in turning preparation
    Chiou, RYS
    Liang, SY
    MATERIALS ISSUES IN MACHINING - III AND THE PHYSICS OF MACHINING PROCESSES - III, 1996, : 209 - 223
  • [47] Chatter stability of a slender cutting tool in turning with tool wear effect
    Chiou, Richard Y.
    Liang, Steven Y.
    International Journal of Machine Tools and Manufacture, 1998, 38 (04): : 315 - 327
  • [48] Chatter stability of a slender cutting tool in turning with tool wear effect
    Chiou, RY
    Liang, SY
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1998, 38 (04): : 315 - 327
  • [49] Prediction of Tool Wear Progress in Machining of Carbon Steel using different Tool Wear Mechanisms
    Umbrello, D.
    Filice, L.
    Micari, F.
    Matsumura, T.
    Shirakashi, T.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 571 - 574
  • [50] Tool wear in soft part turning of high performance steel
    Anmark, Niclas
    Bjork, Thomas
    7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING, 2016, 46 : 484 - 487
12345