Wear mechanisms of several cutting tool materials in hard turning of high carbon-chromium tool steel

被引：70
|
作者：
Shalaby, M. A. [1 ]
El Hakim, M. A. [2 ]
Abdelhameed, Magdy M. [2 ]
Krzanowski, J. E. [3 ]
Veldhuis, S. C. [4 ]
Dosbaeva, G. K. [4 ]
机构：
[1] Tech Res Ctr, Cairo, Egypt
[2] Ain Shams Univ, Fac Engn, Cairo, Egypt
[3] Univ New Hampshire, Dept Mech Engn, Durham, NH 03824 USA
[4] McMaster Univ, Dept Mech Engn, Hamilton, ON L8S 4L7, Canada
来源：
TRIBOLOGY INTERNATIONAL | 2014年 / 70卷
基金：
美国国家科学基金会;
关键词：
Hard turning; Tool wear; PCBN tool material; Alumina ceramic tool material; CUBIC BORON-NITRIDE; CHIP INTERFACE; COATINGS; BEHAVIOR; SURFACE; PCBN; FRICTION; FILMS;
D O I：
10.1016/j.triboint.2013.10.011
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The present study illustrates the performance of three different cutting tool materials, namely: PCBN, TIN coated PCBN, and mixed aluminum ceramic (Al2O3+TiC) in the turning of medium hardened D2 tool steel (52 HRC). Formation of Cr-O tribofilms on the ceramic tool surface as a result of interaction with the workpiece material and environment (identified by X-ray Photoelectron Spectroscopy) leads to improvement of lubricating properties at the tool/chip interface. Obtained results revealed that the mixed alumina ceramic tool can outperform both types of PCBN under different machinability criteria. Crown Copyright (C) 2013 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：148 / 154
页数：7
相关论文
共 50 条
  • [21] Investigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning
    Thamizhmanii, S.
    Hasan, S.
    WORLD CONGRESS ON ENGINEERING 2008, VOL III, 2008, : 1819 - 1823
  • [22] Wear Rate of CBN Cutting Tool in Hard Turning of 100Cr6 Bearing Steel
    Raczkoevi, Laszlo
    PRECISION MACHINING VII, 2014, 581 : 50 - 54
  • [23] Effect of cutting edge radius on surface roughness and tool wear in hard turning of AISI 52100 steel
    T. Zhao
    J. M. Zhou
    V. Bushlya
    J. E. Ståhl
    The International Journal of Advanced Manufacturing Technology, 2017, 91 : 3611 - 3618
  • [24] Effect of cutting edge radius on surface roughness and tool wear in hard turning of AISI 52100 steel
    Zhao, T.
    Zhou, J. M.
    Bushlya, V.
    Stahl, J. E.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 91 (9-12): : 3611 - 3618
  • [25] Influences of chamfer angle of PCBN cutting tool on the cutting forces and tool wear in dry turning hardened steel
    Tong, Yanjiao
    Zhang, Hongtao
    Li, Man
    Dong, Hai
    Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering, 2007, (02): : 66 - 68
  • [26] PCBN tool wear mechanism in hard turning hardened bearing steel
    Dai, S. J.
    Wen, D. H.
    Yuan, J. L.
    ADVANCES IN MACHINING & MANUFACTURING TECHNOLOGY VIII, 2006, 315-316 : 334 - 338
  • [27] Influence of cutting edge geometry on tool wear performance in interrupted hard turning
    Ventura, C. E. H.
    Koehler, J.
    Denkena, B.
    JOURNAL OF MANUFACTURING PROCESSES, 2015, 19 : 129 - 134
  • [28] Tool wear, cutting forces and temperature evaluation when turning hardened bearing steel using PCBN and ceramic tool materials
    Abrao, A.M.
    Aspinwall, D.K.
    Wise, M.L.H.
    1995,
  • [29] Estimation of the tool crater wear of the cutting tool with carbide cutting inserts in turning
    Simsive, J. V.
    Kutyshkin, A. V.
    Simsive, D. C.
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2012, (01): : 50 - 55
  • [30] EVALUATION OF HIGH TEMPERATURE CHARACTERISTICS AND TOOL LIFE OF HIGH CARBON AND HIGH CHROMIUM STEEL AS A SINGLE POINT CUTTING TOOL
    Bharath, H. S.
    Shivashankar, H. S.
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (09) : 10591 - 10595
12345