Wear mechanisms of several cutting tool materials in hard turning of high carbon-chromium tool steel

被引：70
|
作者：
Shalaby, M. A. [1 ]
El Hakim, M. A. [2 ]
Abdelhameed, Magdy M. [2 ]
Krzanowski, J. E. [3 ]
Veldhuis, S. C. [4 ]
Dosbaeva, G. K. [4 ]
机构：
[1] Tech Res Ctr, Cairo, Egypt
[2] Ain Shams Univ, Fac Engn, Cairo, Egypt
[3] Univ New Hampshire, Dept Mech Engn, Durham, NH 03824 USA
[4] McMaster Univ, Dept Mech Engn, Hamilton, ON L8S 4L7, Canada
来源：
TRIBOLOGY INTERNATIONAL | 2014年 / 70卷
基金：
美国国家科学基金会;
关键词：
Hard turning; Tool wear; PCBN tool material; Alumina ceramic tool material; CUBIC BORON-NITRIDE; CHIP INTERFACE; COATINGS; BEHAVIOR; SURFACE; PCBN; FRICTION; FILMS;
D O I：
10.1016/j.triboint.2013.10.011
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The present study illustrates the performance of three different cutting tool materials, namely: PCBN, TIN coated PCBN, and mixed aluminum ceramic (Al2O3+TiC) in the turning of medium hardened D2 tool steel (52 HRC). Formation of Cr-O tribofilms on the ceramic tool surface as a result of interaction with the workpiece material and environment (identified by X-ray Photoelectron Spectroscopy) leads to improvement of lubricating properties at the tool/chip interface. Obtained results revealed that the mixed alumina ceramic tool can outperform both types of PCBN under different machinability criteria. Crown Copyright (C) 2013 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：148 / 154
页数：7
相关论文
共 50 条
  • [31] Wear sensor integrated cutting tool for turning
    Ryabov, O
    Mori, K
    SICON/01: ISA/IEEE SENSORS FOR INDUSTRY CONFERENCE, PROCEEDINGS, 2001, : 84 - 88
  • [32] TURNING WITH INTERRUPTED CUTTING - TOOL WEAR BY CARBIDES
    KAESTNER, W
    WERKSTATTSTECHNIK ZEITSCHRIFT FUR INDUSTRIELLE FERTIGUNG, 1990, 80 (12): : 672 - 676
  • [33] Tool wear of polycrystalline cubic boron nitride and ceramic materials when hard turning bearing steel
    Abrão, Alexandre Mendes
    Aspinwall, David Keith
    Revista Brasileira de Ciencias Mecanicas/Journal of the Brazilian Society of Mechanical Sciences, 1999, 21 (01): : 1 - 9
  • [34] Effect of tool wear on roughness in hard turning
    Penalva, ML
    Arizmendi, M
    Díaz, F
    Fernández, J
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2002, 51 (01) : 57 - 60
  • [35] Influence of cutting parameters on tool wear and surface roughness in hard turning of AISI H11 tool steel using ceramic tools
    Saini, Sanjeev
    Ahuja, Inderpreet Singh
    Sharma, Vishal S.
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2012, 13 (08) : 1295 - 1302
  • [36] Evolution of cutting forces and tool failure mechanisms in intermittent turning of hardened steel with ceramic tool
    Feng Gong
    Jun Zhao
    Jiming Pang
    The International Journal of Advanced Manufacturing Technology, 2017, 89 : 1603 - 1613
  • [37] Influence of cutting parameters on tool wear and surface roughness in hard turning of AISI H11 tool steel using ceramic tools
    Sanjeev Saini
    Inderpreet Singh Ahuja
    Vishal S. Sharma
    International Journal of Precision Engineering and Manufacturing, 2012, 13 : 1295 - 1302
  • [38] Investigation on tool wear and chip morphology in hard turning of EN 31 steel using AlTiN-PVD coated carbide cutting tool
    Khatai, Saswat
    Kumar, Ramanuj
    Sahoo, Ashok Kumar
    Panda, Amlana
    MATERIALS TODAY-PROCEEDINGS, 2022, 59 : 1810 - 1816
  • [39] Evolution of cutting forces and tool failure mechanisms in intermittent turning of hardened steel with ceramic tool
    Gong, Feng
    Zhao, Jun
    Pang, Jiming
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 89 (5-8): : 1603 - 1613
  • [40] WEAR PERFORMANCE OF CERAMIC CUTTING-TOOL MATERIALS WHEN CUTTING STEEL
    CASTO, SL
    VALVO, EL
    LUCCHINI, E
    MASCHIO, S
    MICARI, F
    RUISI, VF
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1991, 28 (1-2) : 25 - 36
12345