The Evaluation of Actual Material Properties of Low Alloy CrMoV Steel from the Results of Small Punch Tests

被引：3
|
作者：
Matocha, Karel [1 ]
Kander, Ladislav [1 ]
Dorazil, Ondrej [1 ]
Guan, Kaishu [2 ]
Xu, Yifen [2 ]
机构：
[1] Mat & Met Res Ltd, Pohranicni 693-31, Ostrava 70300, Czech Republic
[2] East China Univ Sci & Technol, Sch Mech Engn, 130 Mwilong Rd, Shanghai 200237, Peoples R China
来源：
6TH NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS | 2016年 / 12卷
关键词：
SP test; load displacement curve; SP transition temperature T-SP; SP fracture energy E-SP; FATT; empirical correlation;
D O I：
10.1016/j.mspro.2016.03.001
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The Small Punch (SP) test technique is used for the evaluation of actual tensile, fracture and creep characteristics of materials exposed for a long period in operating plant components in order to provide data needed for plant life and integrity assessment. In the present paper the results of SP tests in the temperature range from -193 degrees C to +20 degrees C, carried out in two laboratories on low alloy steel of type 14MoV6-3 in as received state and after long term operation at 540 degrees C were compared. SP transition temperatures T-SP determined from the temperature dependences of the fracture energy were correlated with the FATT temperatures obtained using standardized Charpy V notch test specimens. (C) 2016 Published by Elsevier Ltd.
引用
收藏
页码：1 / 6
页数：6
相关论文
共 50 条
  • [31] Heat Resistant Properties of Welded Joints of Type 15 229 Low-Alloy CrMoV Steel.
    Sobotka, Jaromir
    Foldyna, Vaclav
    Gladis, Rudolf
    Vel'ky, Marian
    Dolezal, Jozef
    Zvaranie Bratislava, 1984, 33 (11): : 322 - 327
  • [32] THE EFFECT OF STIFFNESS OF THE LOADING SYSTEM ON DETERMINATION OF TENSILE CHARACTERISTICS FROM THE RESULTS OF SMALL PUNCH TESTS
    Matocha, Karel
    Kander, Ladislav
    Filip, Miroslav
    Dorazil, Ondrej
    Guan, Kaishu
    Xu, Yifen
    ACTA METALLURGICA SLOVACA, 2014, 20 (04): : 389 - 396
  • [33] Comparison of mechanical properties in conventional and small punch tests of fractured anisotropic A350 alloy forging flange
    Song, Ming
    Guan, Kaishu
    Qin, Wen
    Szpunar, Jerzy A.
    NUCLEAR ENGINEERING AND DESIGN, 2012, 247 : 58 - 65
  • [34] A technique for the determination of post-yield material properties from the small punch test
    Zidan, AA
    Brookfield, DJ
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2003, 38 (04): : 367 - 376
  • [35] Assessment of toughness in long term service CrMo low alloy steel by fracture toughness and small punch test
    Guan, Kaishu
    Hua, Li
    Wang, Qiongqi
    Zou, Xiaohui
    Song, Ming
    NUCLEAR ENGINEERING AND DESIGN, 2011, 241 (05) : 1407 - 1413
  • [36] Evaluation of critical fracture stress in low alloy steels by finite element analysis of small punch test
    Kim, Min-Chul
    Lee, Jae Bong
    Oh, Yong Jun
    Lee, Bong Sang
    PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 416 - +
  • [37] Experimental evaluation of fracture properties of aluminum alloy 1050-H14 by small punch test
    The Yen Doan
    Hang Thi Pham
    Khai Quang Le
    Thi-Hang-Nga Nguyen
    Vinh Van Nghiem
    STRENGTH FRACTURE AND COMPLEXITY, 2023, 16 (01) : 61 - 72
  • [38] Change of mechanical properties of AM60B alloy with heat treatments and its correlation with small punch tests
    Bravo Diez, Pedro Miguel
    Preciado Calzada, Monica
    Cardenas Gonzalo, David
    Calaf Chica, Jose
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2016, 86 : 101 - 108
  • [39] EVALUATION OF MECHANICAL PROPERTIES OF SINTERED LOW-ALLOY STEEL COMPONENTS
    BIANCO, G
    JOURNAL OF THE IRON AND STEEL INSTITUTE, 1962, 200 (08): : 603 - &
  • [40] Evaluation of fracture strength and material degradation for weldment of high temperature service steel using advanced small punch test
    Dong-Hwan Lee
    KSME International Journal, 2004, 18 : 1604 - 1613
12345