The Evaluation of Actual Material Properties of Low Alloy CrMoV Steel from the Results of Small Punch Tests

被引：3
|
作者：
Matocha, Karel [1 ]
Kander, Ladislav [1 ]
Dorazil, Ondrej [1 ]
Guan, Kaishu [2 ]
Xu, Yifen [2 ]
机构：
[1] Mat & Met Res Ltd, Pohranicni 693-31, Ostrava 70300, Czech Republic
[2] East China Univ Sci & Technol, Sch Mech Engn, 130 Mwilong Rd, Shanghai 200237, Peoples R China
来源：
6TH NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS | 2016年 / 12卷
关键词：
SP test; load displacement curve; SP transition temperature T-SP; SP fracture energy E-SP; FATT; empirical correlation;
D O I：
10.1016/j.mspro.2016.03.001
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The Small Punch (SP) test technique is used for the evaluation of actual tensile, fracture and creep characteristics of materials exposed for a long period in operating plant components in order to provide data needed for plant life and integrity assessment. In the present paper the results of SP tests in the temperature range from -193 degrees C to +20 degrees C, carried out in two laboratories on low alloy steel of type 14MoV6-3 in as received state and after long term operation at 540 degrees C were compared. SP transition temperatures T-SP determined from the temperature dependences of the fracture energy were correlated with the FATT temperatures obtained using standardized Charpy V notch test specimens. (C) 2016 Published by Elsevier Ltd.
引用
收藏
页码：1 / 6
页数：6
相关论文
共 50 条
  • [21] Effects of specimen surface condition and atmosphere on small punch creep property of low alloy steel
    Nishioka, Tomoya
    Uemura, Hiromi
    Ohsawa, Toshiyuki
    Sawaragi, Yoshiatu
    Zairyo/Journal of the Society of Materials Science, Japan, 2011, 60 (02) : 146 - 152
  • [22] Temper embrittlement of a CrMo low-alloy steel evaluated by means of small punch testing
    Song, SH
    Faulkner, RG
    Flewitt, PEJ
    Smith, RF
    Marmy, P
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 281 (1-2): : 75 - 81
  • [23] Results of the Round Robin Test for Determination of TSP of P22 Steel by Small Punch Tests
    Matocha, Karel
    Filip, Miroslav
    Karthik, V.
    Kumar, Ran Vijay
    Lacalle, Roberto
    Tonti, Andrea
    DETERMINATION OF MECHANICAL PROPERTIES OF MATERIALS BY SMALL PUNCH AND OTHER MINIATURE TESTING TECHNIQUES, 2ND INTERNATIONAL CONFERENCE SSTT, 2012, : 227 - 232
  • [24] Characterization of creep properties and the microstructure of a service-exposed low alloy CrMoV steel steam pipe
    Kvapilova, Marie
    Ohankova, Marie
    Kral, Petr
    Dvorak, Jiri
    Kucharova, Kveta
    Cmakal, Josef
    Sklenicka, Vaclav
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 853
  • [25] Using the results of creep crack incubation tests on CrMoV steel for predicting long time creep rupture properties
    Holdsworth, S. R.
    Mazza, E.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2009, 86 (12) : 838 - 844
  • [26] INFLUENCE OF MICROSTRUCTURE AND HEAT-TREATMENT ON IMPACT AND CREEP PROPERTIES OF A LOW ALLOY CRMOV TURBINE STEEL
    RELANDER, K
    GEIGER, T
    JOURNAL OF ENGINEERING FOR POWER, 1967, 89 (02): : 238 - &
  • [27] Fracture toughness evaluation of fusion reactor structural steels at low temperatures by small punch tests
    Misawa, T., 1600, (169):
  • [28] A study concerning material fracture toughness and some small punch test data for low alloy steels
    Bulloch, JH
    ENGINEERING FAILURE ANALYSIS, 2004, 11 (04) : 635 - 653
  • [29] Mechanical properties assessment of additively manufactured Ti64 alloy using small punch tests
    Lale, Mathieu
    Viguier, Bernard
    MATERIALS AT HIGH TEMPERATURES, 2024, 41 (01) : 187 - 194
  • [30] EVALUATION OF MECHANICAL PROPERTIES OF ULTRA-FINE GRAIN TITANIUM USING SMALL PUNCH TESTS
    Greger, Miroslav
    Kander, Ladislav
    NANOCON 2013, 5TH INTERNATIONAL CONFERENCE, 2014, : 560 - 565
12345