The Evaluation of Actual Material Properties of Low Alloy CrMoV Steel from the Results of Small Punch Tests

被引：3
|
作者：
Matocha, Karel [1 ]
Kander, Ladislav [1 ]
Dorazil, Ondrej [1 ]
Guan, Kaishu [2 ]
Xu, Yifen [2 ]
机构：
[1] Mat & Met Res Ltd, Pohranicni 693-31, Ostrava 70300, Czech Republic
[2] East China Univ Sci & Technol, Sch Mech Engn, 130 Mwilong Rd, Shanghai 200237, Peoples R China
来源：
6TH NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS | 2016年 / 12卷
关键词：
SP test; load displacement curve; SP transition temperature T-SP; SP fracture energy E-SP; FATT; empirical correlation;
D O I：
10.1016/j.mspro.2016.03.001
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The Small Punch (SP) test technique is used for the evaluation of actual tensile, fracture and creep characteristics of materials exposed for a long period in operating plant components in order to provide data needed for plant life and integrity assessment. In the present paper the results of SP tests in the temperature range from -193 degrees C to +20 degrees C, carried out in two laboratories on low alloy steel of type 14MoV6-3 in as received state and after long term operation at 540 degrees C were compared. SP transition temperatures T-SP determined from the temperature dependences of the fracture energy were correlated with the FATT temperatures obtained using standardized Charpy V notch test specimens. (C) 2016 Published by Elsevier Ltd.
引用
收藏
页码：1 / 6
页数：6
相关论文
共 50 条
  • [11] Creep Properties of SUS304 Steel by Small Punch Creep Tests
    Chen, Gang
    Zhai, PengCheng
    Zhang, QingJie
    MULTISCALE, MULTIFUNCTIONAL AND FUNCTIONALLY GRADED MATERIALS, 2010, 631-632 : 387 - 392
  • [12] Creep Properties Assessment of P92 Steel by Small Punch Creep Tests
    G. S. Deshmukh
    M. L. Prasad
    D. R. Peshwe
    J. Ganesh Kumar
    M. D. Mathew
    G. Amarendra
    Transactions of the Indian Institute of Metals, 2016, 69 : 907 - 915
  • [13] Creep Properties Assessment of P92 Steel by Small Punch Creep Tests
    Deshmukh, G. S.
    Prasad, M. L.
    Peshwe, D. R.
    Kumar, J. Ganesh
    Mathew, M. D.
    Amarendra, G.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2016, 69 (04) : 907 - 915
  • [14] The derivation of materials properties data from small scale punch tests
    Shuter, DM
    Dutton, J
    Geary, W
    ECF 11 - MECHANISMS AND MECHANICS OF DAMAGE AND FAILURE, VOLS I-III, 1996, : 2205 - 2210
  • [15] Evaluation of cryogenic mechanical properties of aluminum alloy using small punch test
    Cha, Hojun
    Jeon, Seungmin
    Yoon, Donghyeon
    Yoo, Jisung
    Lee, Seunggun
    Kim, Seokho
    PROGRESS IN SUPERCONDUCTIVITY AND CRYOGENICS, 2023, 25 (04): : 70 - 74
  • [16] Material properties from small specimens using the punch and bulge test
    Brookfield, DJ
    Li, W
    Rodgers, B
    Mottershead, JE
    Hellen, TK
    Jarvis, J
    Lohr, R
    Howard-Hildige, R
    Carlton, A
    Whelan, M
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 1999, 34 (06): : 423 - 435
  • [17] Material plastic properties characterization by coupling experimental and numerical analysis of small punch beam tests
    Zhou, Xingguo
    Pan, Wenke
    Mackenzie, Donald
    COMPUTERS & STRUCTURES, 2013, 118 : 59 - 65
  • [18] Small punch test evaluation of neutron-irradiation-induced embrittlement of a Cr-Mo low-alloy steel
    Song, SH
    Faulkner, RG
    Flewitt, PEJ
    Marmy, P
    Weng, LQ
    MATERIALS CHARACTERIZATION, 2004, 53 (01) : 35 - 41
  • [19] Validation of the small punch test as a method for assessing ageing of a V modified low alloy steel
    Di Persio, F
    Stratford, GC
    Hurst, RC
    BALTICA VI: LIFE MANAGEMENT AND MAINTENANCE FOR POWER PLANTS, VOL 1 AND 2, 2004, 233-234 : 523 - 535
  • [20] Probabilistic assessment of material properties for reactor low alloy steel
    Moorman, JE
    STRUCTURAL INTEGRITY IN THE 21ST CENTURY: THE LIFETIME OF PLANT, STRUCTURES AND COMPONENTS: EVALUATION, DESIGN, EXTENSION AND MANAGEMENT, 2000, : 227 - 235
12345