Mode I and II fracture behaviour of rubber modified brittle epoxies

被引：7
|
作者：
Kim, HS [1 ]
Ma, P [1 ]
机构：
[1] Univ Newcastle, Dept Mech Engn, Callaghan, NSW 2308, AUSTRALIA
来源：
POLYMER BLENDS AND POLYMER COMPOSITES | 1998年 / 137卷
关键词：
fracture; toughness; epoxy; mode II; shear deformation; cavitation; adhesion; DDS; rubber; adhesive;
D O I：
10.4028/www.scientific.net/KEM.137.179
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of rubber modification on a brittle epoxy system cured using DDS has been studied in terms of fracture behaviour. Fracture mechanism, deformation and fracture surface characteristics under mode II loading have been investigated in comparison with those under mode I loading. For mode II fracture, two different types of tests were employed ie four-point shear tests for bulky epoxies and compact shear specimen tests for adhesive layers sandwiched between 6060-T5 aluminium. The fracture toughness in the former has been found to decrease with rubber modification. Fracture surfaces were examined in association with this result and was discussed in terms of cavitation and shear deformation. The fracture toughness in the latter for rubber modified epoxies has been found to also decrease as compared to the control. This result was discussed in relation to the density of tunnelling of microcracks. Also it was found that the fracture toughness of the control under mode II loading for either type is higher than that under mode I loading.
引用
收藏
页码：179 / 186
页数：8
相关论文
共 50 条
  • [41] Rubber-modified epoxies. II. Influence of the cure schedule and rubber concentration on the generated morphology
    Verchere, D., 1600, (42):
  • [42] Effect of boundary conditions in mode I fracture in brittle materials
    Espanol, P
    Zuniga, I
    Rubio, MA
    PHYSICA D-NONLINEAR PHENOMENA, 1996, 96 (1-4) : 375 - 383
  • [43] Mode-I and mixed-mode I/II fracture behaviour of sintered alumina at ambient and elevated temperatures
    Kumari, Sweety
    Prasad, N. Eswara
    Malakondaiah, G.
    Bhaskar, B.
    Rao, B. Naga Prasad
    JOURNAL OF ADVANCED MATERIALS, 2006, : 60 - 69
  • [44] STRESS-WHITENING IN RUBBER-MODIFIED EPOXIES
    OH, BS
    KIM, HS
    MA, P
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1994, 207 : 6 - PMSE
  • [45] Fatigue and fracture behaviour of novel rubber modified epoxy resins
    Lowe, A
    Kwon, OH
    Mai, YW
    POLYMER, 1996, 37 (04) : 565 - 572
  • [46] Fracture of V-notched specimens under mixed mode (I + II) loading in brittle materials
    F. J. Gómez
    M. Elices
    F. Berto
    P. Lazzarin
    International Journal of Fracture, 2009, 159 : 121 - 135
  • [47] Fabrication and Characterization of Novel Liquid Rubber Modified Epoxies
    Gunwant, Dheeraj
    Sah, Prakash L.
    Zaidi, M. G. H.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (11) : 24750 - 24759
  • [48] Rubber-modified epoxies: Interfacial tension and morphology
    Sohn, John E.
    Emerson, John A.
    Thompson, Patrick A.
    Koberstein, Jeffrey T.
    Journal of Applied Polymer Science, 1989, 37 (09): : 2627 - 2636
  • [49] Effect of moisture on pure mode I and II fracture behaviour of composite bonded joints
    Fernandes, R. L.
    de Moura, M. F. S. F.
    Moreira, R. D. F.
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2016, 68 : 30 - 38
  • [50] TOUGHNESS OF EPOXIES MODIFIED BY PREFORMED ACRYLIC RUBBER PARTICLES
    LEVITA, G
    MARCHETTI, A
    LAZZERI, A
    MAKROMOLEKULARE CHEMIE-MACROMOLECULAR SYMPOSIA, 1991, 41 : 179 - 194
12345