Fabrication and Characterization of Novel Liquid Rubber Modified Epoxies

被引：7
|
作者：
Gunwant, Dheeraj [1 ]
Sah, Prakash L. [1 ]
Zaidi, M. G. H. [2 ]
机构：
[1] GB Pant Univ Agr & Technol, Mech Engn Dept, Pantnagar 263145, Uttar Pradesh, India
[2] GB Pant Univ Agr & Technol, Chem Dept, Pantnagar 263145, Uttar Pradesh, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 11期
关键词：
Liquid rubber toughened epoxy; tensile test; fracture toughness; impact strength; thermogravimetric analysis; MECHANICAL-PROPERTIES; DGEBA EPOXY; FRACTURE; BLENDS; COMPOSITES; MORPHOLOGY; TOUGHNESS;
D O I：
10.1016/j.matpr.2018.10.273
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present investigation, a DGEBA based epoxy has been modified by a novel liquid rubber (LR) (0-25 wt. %) obtained from the pyrolysis of scrap rubber. Mechanical characterizations viz. tensile, impact and fracture toughness were conducted on the prepared LR modified epoxies (LREs). A reduction in the Young's modulus and tensile strength was observed with LR concentration. Highest increase in impact strength (similar to 73 %) and KIC (similar to 79 %) at 15 wt. % LR concentrations was observed in the LREs. FESEM revealed the formation of biphasic morphology and cavitation followed by shear yielding to be the prevalent toughening mechanism. Thermogravimetric analysis revealed that LR addition has negligible effect on the thermal stabilities of epoxy. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码：24750 / 24759
页数：10
相关论文
共 50 条
  • [1] RUBBER-MODIFIED EPOXIES - TRANSITIONS AND MORPHOLOGY
    MANZIONE, LT
    GILLHAM, JK
    MCPHERSON, CA
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1979, (SEP): : 74 - &
  • [2] Stress-whitening in rubber modified epoxies
    1600, (70):
  • [3] Morphology and micromechanics of liquid rubber toughened epoxies
    Gunwant, Dheeraj
    Sah, Prakash L.
    Zaidi, M. G. H.
    E-POLYMERS, 2018, 18 (06): : 511 - 527
  • [4] STRESS-WHITENING IN RUBBER-MODIFIED EPOXIES
    OH, BS
    KIM, HS
    MA, P
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1994, 207 : 6 - PMSE
  • [5] Rubber-modified epoxies: Interfacial tension and morphology
    Sohn, John E.
    Emerson, John A.
    Thompson, Patrick A.
    Koberstein, Jeffrey T.
    Journal of Applied Polymer Science, 1989, 37 (09): : 2627 - 2636
  • [6] TOUGHNESS OF EPOXIES MODIFIED BY PREFORMED ACRYLIC RUBBER PARTICLES
    LEVITA, G
    MARCHETTI, A
    LAZZERI, A
    MAKROMOLEKULARE CHEMIE-MACROMOLECULAR SYMPOSIA, 1991, 41 : 179 - 194
  • [7] Interesting fractographic observations on rubber-modified epoxies
    Subramanian, M
    Malhotra, SK
    Krishnamurthy, R
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1996, 15 (07) : 576 - 578
  • [8] FATIGUE IN RUBBER-MODIFIED EPOXIES AND OTHER POLYBLENDS
    MANSON, JA
    HERTZBERG, RW
    CONNELLY, GM
    HWANG, J
    ADVANCES IN CHEMISTRY SERIES, 1986, (211): : 291 - 312
  • [9] RUBBER-MODIFIED EPOXIES - CURE, TRANSITIONS, AND MORPHOLOGY
    CHAN, LC
    GILLHAM, JK
    KINLOCH, AJ
    SHAW, SJ
    ADVANCES IN CHEMISTRY SERIES, 1984, (208): : 235 - 260
  • [10] MODELING THE TOUGHENING MECHANISMS IN RUBBER-MODIFIED EPOXIES
    GUILD, FJ
    HUANG, Y
    KINLOCH, AJ
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1994, 207 : 130 - PMSE
12345