Fabrication and Characterization of Novel Liquid Rubber Modified Epoxies

被引：7
|
作者：
Gunwant, Dheeraj [1 ]
Sah, Prakash L. [1 ]
Zaidi, M. G. H. [2 ]
机构：
[1] GB Pant Univ Agr & Technol, Mech Engn Dept, Pantnagar 263145, Uttar Pradesh, India
[2] GB Pant Univ Agr & Technol, Chem Dept, Pantnagar 263145, Uttar Pradesh, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 11期
关键词：
Liquid rubber toughened epoxy; tensile test; fracture toughness; impact strength; thermogravimetric analysis; MECHANICAL-PROPERTIES; DGEBA EPOXY; FRACTURE; BLENDS; COMPOSITES; MORPHOLOGY; TOUGHNESS;
D O I：
10.1016/j.matpr.2018.10.273
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present investigation, a DGEBA based epoxy has been modified by a novel liquid rubber (LR) (0-25 wt. %) obtained from the pyrolysis of scrap rubber. Mechanical characterizations viz. tensile, impact and fracture toughness were conducted on the prepared LR modified epoxies (LREs). A reduction in the Young's modulus and tensile strength was observed with LR concentration. Highest increase in impact strength (similar to 73 %) and KIC (similar to 79 %) at 15 wt. % LR concentrations was observed in the LREs. FESEM revealed the formation of biphasic morphology and cavitation followed by shear yielding to be the prevalent toughening mechanism. Thermogravimetric analysis revealed that LR addition has negligible effect on the thermal stabilities of epoxy. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码：24750 / 24759
页数：10
相关论文
共 50 条
  • [21] Preparation and Characterization of Liquid Rubber-modified Polybenzoxazine
    Suwitaningsih, Dwi Ngesti
    Katsuta, Seizaburo
    Kawauchi, Takehiro
    Furukawa, Nobuyuki
    Takeichi, Tsutomu
    JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY, 2015, 28 (02) : 137 - 143
  • [22] Effects of rubber-rich domains and the rubber-plasticized matrix on the fracture behavior of liquid rubber-modified araldite-F epoxies
    Xiao, KQ
    Ye, L
    POLYMER ENGINEERING AND SCIENCE, 2000, 40 (11): : 2288 - 2298
  • [23] Effects of particle size and rubber content on fracture toughness in rubber-modified epoxies
    Kim, DS
    Cho, K
    Kim, JK
    Park, CE
    POLYMER ENGINEERING AND SCIENCE, 1996, 36 (06): : 755 - 768
  • [24] MORPHOLOGY AND DYNAMIC MECHANICAL-PROPERTIES OF RUBBER-MODIFIED EPOXIES
    SAITO, N
    IKUSHIMA, T
    TAKAHASHI, T
    CHIKAISHI, K
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1986, 192 : 13 - PMSE
  • [25] PARTICLE TEAR ENERGY CONTRIBUTION TO THE TOUGHNESS OF RUBBER-MODIFIED EPOXIES
    KUNZ, SC
    SAYRE, JA
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1983, 186 (AUG): : 97 - PMSE
  • [26] FATIGUE CRACK-PROPAGATION IN RUBBER-MODIFIED EPOXIES AND POLYACETAL
    HWANG, J
    MANSON, JA
    CONNELLY, GM
    PECORINI, T
    HERTZBERG, RW
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1987, 194 : 92 - PMSE
  • [27] RUBBER-MODIFIED EPOXIES - MORPHOLOGY, TRANSITIONS, AND MECHANICAL-PROPERTIES
    CHAN, LC
    GILLHAM, JK
    KINLOCH, AJ
    SHAW, SJ
    ADVANCES IN CHEMISTRY SERIES, 1984, (208): : 261 - 279
  • [28] Mode I and II fracture behaviour of rubber modified brittle epoxies
    Kim, HS
    Ma, P
    POLYMER BLENDS AND POLYMER COMPOSITES, 1998, 137 : 179 - 186
  • [29] RUBBER-MODIFIED EPOXIES - ANALYSIS OF THE PHASE-SEPARATION PROCESS
    VERCHERE, D
    SAUTEREAU, H
    PASCAULT, JP
    MOSCHIAR, SM
    RICCARDI, CC
    WILLIAMS, RJJ
    ADVANCES IN CHEMISTRY SERIES, 1993, (233): : 335 - 363
  • [30] EFFECTS OF MONOTONIC AND CYCLIC LOADING ON SOME RUBBER-MODIFIED EPOXIES
    SHAH, DN
    ATTALLA, G
    MANSON, JA
    CONNELLY, GM
    HERTZBERG, RW
    ADVANCES IN CHEMISTRY SERIES, 1984, (208): : 117 - 135
12345