Fabrication and Characterization of Novel Liquid Rubber Modified Epoxies

被引：7

作者：

Gunwant, Dheeraj ^{[1
]}

Sah, Prakash L. ^{[1
]}

Zaidi, M. G. H. ^{[2
]}

机构：

[1] GB Pant Univ Agr & Technol, Mech Engn Dept, Pantnagar 263145, Uttar Pradesh, India

[2] GB Pant Univ Agr & Technol, Chem Dept, Pantnagar 263145, Uttar Pradesh, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 11期

关键词：

Liquid rubber toughened epoxy; tensile test; fracture toughness; impact strength; thermogravimetric analysis; MECHANICAL-PROPERTIES; DGEBA EPOXY; FRACTURE; BLENDS; COMPOSITES; MORPHOLOGY; TOUGHNESS;

D O I：

10.1016/j.matpr.2018.10.273

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In the present investigation, a DGEBA based epoxy has been modified by a novel liquid rubber (LR) (0-25 wt. %) obtained from the pyrolysis of scrap rubber. Mechanical characterizations viz. tensile, impact and fracture toughness were conducted on the prepared LR modified epoxies (LREs). A reduction in the Young's modulus and tensile strength was observed with LR concentration. Highest increase in impact strength (similar to 73 %) and KIC (similar to 79 %) at 15 wt. % LR concentrations was observed in the LREs. FESEM revealed the formation of biphasic morphology and cavitation followed by shear yielding to be the prevalent toughening mechanism. Thermogravimetric analysis revealed that LR addition has negligible effect on the thermal stabilities of epoxy. (C) 2018 Elsevier Ltd. All rights reserved.

引用

页码：24750 / 24759

页数：10

共 50 条

[41] TOUGHENING MECHANISMS OF MODIFIED UNSATURATED POLYESTER WITH NOVEL LIQUID POLYURETHANE RUBBER
KIM, DS
CHO, K
AN, JH
PARK, CE
JOURNAL OF MATERIALS SCIENCE, 1994, 29 (07) : 1854 - 1866
[42] TOUGHENING MECHANISMS OF MODIFIED UNSATURATED POLYESTER WITH NOVEL LIQUID POLYURETHANE RUBBER
KIM, DS
PARK, CE
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1994, 207 : 52 - PMSE
[43] Toughening mechanisms of modified unsaturated polyester with novel liquid polyurethane rubber
Kim, D.S.
Park, Chan E.
Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering, 1993, 70
[44] LIQUID SILICONE-RUBBER FABRICATION
HAYS, WR
KEHRER, GP
MONROE, CM
ELASTOMERICS, 1977, 109 (09): : 31 - 31
[45] Rubber-modified epoxies. II. Influence of the cure schedule and rubber concentration on the generated morphology
Verchere, D., 1600, (42):
[46] FRACTURE-TOUGHNESS AND THE CORRESPONDING TOUGHENING MECHANISMS OF RUBBER-MODIFIED BRITTLE EPOXIES
SUE, HJ
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1990, 200 : 68 - PMSE
[47] Correlation between stress-whitening and fracture toughness in rubber-modified epoxies
Kim, HS
Ma, P
JOURNAL OF APPLIED POLYMER SCIENCE, 1996, 61 (04) : 659 - 662
[48] SYNTHESIS AND CHARACTERIZATION OF MODIFIED PHENOLICS AND THEIR APPLICATION AS CURING AGENT FOR EPOXIES
PATEL, RT
PATEL, SP
PATEL, RD
ANGEWANDTE MAKROMOLEKULARE CHEMIE, 1995, 230 : 99 - 104
[49] PHYSICAL-PROPERTIES OF BARIUM TITANATE-FILLED RUBBER-MODIFIED EPOXIES
TSE, MF
JOURNAL OF APPLIED POLYMER SCIENCE, 1985, 30 (09) : 3625 - 3647
[50] RUBBER-MODIFIED EPOXIES - EFFECT OF CURE ON TRANSITIONS, MORPHOLOGY AND MECHANICAL-PROPERTIES
GILLHAM, JK
CHAN, LC
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1983, 186 (AUG): : 100 - PMSE

← 1 2 3 4 5 →